Rapid and Low-Cost Method for Evaluation of Nutrient Release from Controlled-Release Fertilizers Using Electrical Conductivity

Methods to determine nutrient release rates of coated fertilizers usually rely on chemical analyses, which often are time-consuming and/or expensive. Our goal was to develop an innovative and rapid low-cost method to evaluate nutrient release from polymer coated MAP or urea using conductometry. The release in water is determined by measuring the electric conductivity (EC) over time, with intervals dependent on release rates. In the case of soluble salt fertilizers, EC can be immediately determined and converted to a concentration using a calibration curve. In the case of urea, an additional step is needed to convert the neutral urea into ammonium. The release rates in water were assessed for a range of commercial and laboratory-coated fertilizers. A validation test demonstrated strong agreement with the release determined using analytical techniques. The EC method hence offers an easy way to quickly evaluate the time course of release of nutrients from controlled-release fertilizers.     

Assessment Tools for Urban Catchments: Developing Stressor Gradients1

Abstract: This is the first in a series of three articles designed to establish empirically defined biological indicators and thresholds for impairment for urbanized catchments, and to describe a process by which the biological condition of waterbodies in urbanized catchments can be applied. This article describes alternative gradients of urbanization for assessing and selecting a nationally applicable biological index (article 2 – Purcell et al., this issue ) and defining the potential of biological communities within a gradient of cumulative stressors (article 3 – Paul et al. this issue ). Gradients were designed to represent the most prominent mosaic of stressors found in urban settings. A primary urban gradient was assembled based on readily obtained information of urbanization to include three broad‐scale parameters: percent urban land use/land cover, population density, and road density. This gradient was used as the standard by which alternative urban gradients, which included fine‐scale instream chemical and hydrologic parameters, were assessed. Five alternative gradients were developed to provide numerous environmental management options based on availability of data from water program resources. The urban gradients were developed with the intent that they be applied throughout the country; therefore, data from three different regions of the United States (Mid‐Atlantic, Midwest, and Pacific Coast) were used to validate the urban gradient model. Our study showed that a relatively straightforward stressor gradient consisting of human population density, road density, and urban land use is useful in providing a framework for developing relevant biological indicators and evaluating the potential of biological communities as a basis for assessing attainment of designated aquatic life use.     

国际石油工业环境保护协会(IPIECA)：在城市空气质量管理中的积极作用

国际石油工业环境保护协会(IPIECA)已形成了用于发展中国家的城市空气质量管理框架.它提出一种为削减排放从而达到空气质量标准而进行的区域项目评估、了解问题和评价对策的方法.这一举措的目的是促进发展实用的、有科学根据的和成本效率的方法以帮助建立有益于健康的空气质量标准.     

Suppression of nucleation mode particles by biomass burning in an urban environment: a case study

Measurements of concentrations and size distributions of particles 4.7 to 160 nm were taken using an SMPS during the bonfire and firework celebrations on Bonfire Night in Leeds, UK, 2006. These celebrations provided an opportunity to study size distributions in a unique atmospheric pollution situation during and following a significant emission event due to open biomass burning. A log-normal fitting program was used to determine the characteristics of the modal groups present within hourly averaged size distributions. Results from the modal fitting showed that on bonfire night the smallest nucleation mode, which was present before and after the bonfire event and on comparison weekends, was not detected within the size distribution. In addition, there was a significant shift in the modal diameters of the remaining modes during the peak of the pollution event. Using the concept of a coagulation sink, the atmospheric lifetimes of smaller particles were significantly reduced during the pollution event, and thus were used to explain the disappearance of the smallest nucleation mode as well as changes in particle count mean diameters. The significance for particle mixing state is discussed.     

Dust Controls for Outdoor Working Areas

The purpose of Informative Report No. 9, prepared by the TI-5 Public Utilities Committee of the Air Pollution Control Association, is to review the various methods available to power plants for controlling dust at working coal storage piles, car dumpers, coal unloading equipment, and fly ash disposal areas.     

Blood dioxin biomonitoring to assess local residents' exposure from a large urban remediation project

Background

A total of 265 000 m³ of dioxin contaminated soil and sediments from past industrial activity was treated on site in an urban setting in Sydney, Australia. To respond to local community concerns about potential dioxin exposure from fugitive emissions a human biomonitoring study was undertaken.

Objective

To determine whether local residents were exposed to significant amounts of dioxin from the remediation process.Methods: Blood samples were collected from local residents around the site and a representative metropolitan control group. They were pooled within age and sex strata and the change in dioxin concentrations over the remediation period and a summary of the mid point and post remediation dioxin concentrations were compared between groups. Information on dietary intake was collected to look for possible confounding.

Results

The mean dioxin Toxic Equivalent concentrations (TeQ) decreased among both the local resident and control groups over the remediation period by 1.9 and 2.1 pg gm⁻¹ lipid respectively. Modelled blood concentrations adjusting for age and sex did not detect a significant difference between groups for changes in either TeQ or 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8 TCDD). The summary measure approach did however demonstrate that the 2,3,7,8 TCDD concentrations among the local resident group was approximately 0.7 pg g⁻¹ lipid higher compared to the control group post remediation. There were no significant changes in dietary intake sources of dioxin.

Conclusion

Biomonitoring demonstrated that local residents were not exposed to significant quantities of dioxin. Large scale remediation of dioxin contaminated land can be safely undertaken in an urban setting.     

Transfer functions for solid-solution partitioning of cadmium for Australian soils

To assess transport and ecotoxicological risks of metals, such as cadmium (Cd) in soils, models are needed for partitioning and speciation. We derived regression-based “partition-relations” based on adsorption and desorption experiments for main Australian soil types. First, batch adsorption experiments were carried out over a realistic range of dissolved Cd concentrations in agricultural soils in Australia. Results showed linear sorption relationships, implying the adequacy of using Kd values to describe partitioning. Desorption measurements were then carried out to assess in-situ Kd values and relate these to soil properties The best transfer functions for solid-solution partitioning were found for Kd values relating total dissolved Cd concentration to total soil Cd concentrations, accounting for the variation in pH, SOM contents and DOC concentrations. Model predictions compared well with measurements of an independent data set, but there was a tendency to underestimate dissolved Cd concentrations of highly polluted soils.     

Copper lability in soils subjected to intermittent submergence

Reducing conditions in soils can have significant influences on the availability of nutrient and toxic metals, through their remobilization, their release through reductive dissolution of oxide phases, and from the formation of precipitates. In the literature, contrasting results are reported on the effects of temporary waterlogging conditions on the availability of metals. In the present study, changes in the "labile" or "potentially available" pool of copper (Cu) in soils as a consequence of up to three intermittent soil submergence cycles was investigated using isotopic dilution. The soils (an Oxisol and an Inceprisol) selected were amended in the field with both biosolids-Cu and salt-Cu. Intermittent soil submergence was found to have a significant effect on the lability of Cu in soils, with E(total) values generally increasing in all the treatments with the different submergence cycles, the highest lability of Cu observed in the Cu-salt treatment. The presence of nonexchangeable colloidal forms of Cu, influenced by treatments and submergence cycles, was also reported.     

Elevated biogenic sulphur dioxide concentrations over the North Atlantic

Elevated biogenic SO₂ from the oxidation of dimethylsulphide (DMS) in the marine atmosphere was measured over the North Atlantic Ocean in spring and summer 2003. Stable isotope apportionment was used to distinguish between anthropogenic and biogenic SO₂ in the marine atmosphere south of Greenland. Atmospheric DMS measurements were within range of previous studies. Biogenic SO₂ concentrations were as high as 82 nmol m^?3 (spring geometric mean: 4 nmol m^?3, σ = 17; summer geometric mean 7 nmol m^?3, σ = 19) and are the highest reported values for marine biogenic SO₂ in the literature. Elevated biogenic SO₂ was found in air masses influenced by anthropogenic pollutants during the summer. This indicates that anthropogenic pollutants may affect the fate of oceanic emissions of sulphur compounds in the atmosphere favoring the formation of cloud condensation nuclei.     

Models for the field-based toxicity of copper and zinc salts to wheat in 11 Australian soils and comparison to laboratory-based models

Laboratory-based relationships that model the phytotoxicity of metals using soil properties have been developed. This paper presents the first field-based phytotoxicity relationships. Wheat (Triticum aestivum L.) was grown at 11 Australian field sites at which soil was spiked with copper (Cu) and zinc (Zn) salts. Toxicity was measured as inhibition of plant growth at 8 weeks and grain yield at harvest. The added Cu and Zn EC10 values for both endpoints ranged from approximately 3 to 4760 mg/kg. There were no relationships between field-based 8-week biomass and grain yield toxicity values for either metal. Cu toxicity was best modelled using pH and organic carbon content while Zn toxicity was best modelled using pH and the cation exchange capacity. The best relationships estimated toxicity within a factor of two of measured values. Laboratory-based phytotoxicity relationships could not accurately predict field-based phytotoxicity responses.