Technetium-99 in the Irish marine environment

Technetium-99 activity concentrations in seawater and biota from Irish coastal waters are presented. Time series measurements of 99Tc in seawater and Fucus vesiculosus from the western Irish Sea show that activity concentrations have increased in line with the increase in discharges of 99Tc from Sellafield. The peak in activity concentrations in both seawater and Fucus vesiculosus occurred in 1997 approximately two years after the peak in 99Tc discharges. The highest activity concentration recorded in Fucus vesiculosus showed a 29-fold increase over the mean concentration for the period 1988-1993. Technetium-99 activity concentrations were measured in fish, lobsters, prawns, mussels and oysters landed at major fishing ports on the east and northeast coasts of Ireland between 1996 and 1998. Concentration factors for 99Tc in the brown seaweed Fucus vesiculosus and certain species of fish, crustaceans and molluscs from the Irish Sea were estimated. In general, these concentration factors were higher than those in the literature which were derived from laboratory studies, but agreed well with values which were based on field studies. The mean committed effective doses to Irish typical and heavy seafood consumers due to 99Tc in the period 1996-1998 were 0.061 and 0.24 microSv, respectively.     

Beyond contractual interpretation: bias in arbitrators' case perceptions and award recommendations

This study applies literature on extra‐legal variables and impression management towards an understanding of judgment biases in arbitration. The extra‐legal variables of previous record and consequence of infraction as well as impression management strategy were manipulated in a written case sent to practising arbitrators. Results suggest that impression management and previous record independently affected the severity of the arbitrator's ruling. In addition, significant interactions occurred. The data are discussed in terms of implications for arbitration and future studies in the area. Copyright © 2000 John Wiley & Sons, Ltd.     

Comparison of coal/solid recovered fuel (SRF) with coal/refuse derived fuel (RDF) in a fluidized bed reactor

An experimental study was undertaken to compare the differences between municipal solid waste (MSW) derived solid recovered fuel (SRF) (complying with CEN standards) and refuse derived fuel (RDF). Both fuels were co-combusted with coal in a 50 kW fluidised bed combustor and the metal emissions were compared. Synthetic SRF was prepared in the laboratory by grinding major constituents of MSW such as paper, plastic, textile and wood. RDF was obtained from a local mechanical treatment plant. Heavy metal emissions in flue gas and ash samples from the (coal + 10% SRF) fuel mixture were found to be within the acceptable range and were generally lower than that obtained for coal + 10% RDF fuel mixture. The relative distribution of heavy metals in ash components and the flue gas stream shows the presence of a large fraction (up to 98%) of most of the metals in the ash (except Hg and As). Thermo-gravimetric (TG) analysis of SRF constituents was performed to understand the behaviour of fuel mixtures in the absence and presence of air. The results obtained from the experimental study will enhance the confidence of fuel users towards using MSW-derived SRF as an alternative fuel.     

Mineralisation of target hydrocarbons in three contaminated soils from former refinery facilities

This study investigated the microbial degradation of ¹⁴C-labelled hexadecane, octacosane, phenanthrene and pyrene and considered how degradation might be optimised in three genuinely hydrocarbon-contaminated soils from former petroleum refinery sites. Hydrocarbon mineralisation by the indigenous microbial community was monitored over 23 d. Hydrocarbon mineralisation enhancement by nutrient amendment (biostimulation), hydrocarbon degrader addition (bioaugmentation) and combined nutrient and degrader amendment, was also explored. The ability of indigenous soil microflora to mineralise ¹⁴C-target hydrocarbons was appreciable; ≥16% mineralised in all soils. Generally, addition of nutrients or degraders increased the rates and extents of mineralisation of ¹⁴C-hydrocarbons. However, the addition of nutrients and degraders in combination had a negative effect upon ¹⁴C-octacosane mineralisation and resulted in lower extents of mineralisation in the three soils. In general, the rates and extents of mineralisation will be dependent upon treatment type, nature of the contamination and adaptation of the ingenious microbial community.     

Influence of mature compost amendment on total and bioavailable polycyclic aromatic hydrocarbons in contaminated soils

A laboratory microcosm study was carried out to assess the influence of compost amendment on the degradation and bioavailability of PAHs in contaminated soils. Three soils, contaminated with diesel, coal ash and coal tar, respectively, were amended with two composts made from contrasting feedstock (green waste and predominantly meat waste) at two different rates (250 and 750 t ha^?1) and incubated for 8 months. During this period the treatments were sampled for PAH analysis after 0, 3, 6 and 8 months. Total and bioavailable fractions were obtained by sequential ultrasonic solvent extraction and hydroxypropyl-β-cyclodextrin extraction, respectively, and PAHs were identified and quantified by GC–MS. Bioavailability decrease due to sorption was only observed at the first 3 months in the diesel spiked soil. After 8 months, compost addition resulted in over 90% loss of total PAHs irrespective of soil types. Desorption and degradation contributed to 30% and 70%, respectively, of the PAH loss in the spiked soil, while PAH loss in the other two soils resulted from 40% enhanced desorption and 60% enhanced degradation. Compost type and application rates had little influence on PAH bioavailability, but higher PAH removal was observed at higher initial concentration during the early stage of incubation. The bioavailable fraction of PAH was inversely correlated to the number of benzene rings and the octanol–water partition coefficient. Further degradation was not likely after 8-month although over 30% of the residual PAHs were bioavailable, which highlighted the application of bioavailability concept during remediation activities.     

Selenium concentrations in water and plant tissues of a newly formed arid wetland in Las Vegas, Nevada

There is concern that elevated levels of selenium found in the source water of a newly formed wetland park in Las Vegas, Nevada, may have detrimental effects on local wildlife. In this study, we collected and analyzed water samples monthly for a three year period from the inflow and outflow of the system. We also gathered dominant aquatic plants and selected terrestrial plants and analyzed the water and plant tissues (root, shoot, leaf and flower) for selenium by high resolution Inductively Coupled Plasma Mass Spectrometer. Except for storm events and the introduction of an alternative low selenium content source water during summer low-flow conditions, selenium in the water was relatively stable. The concentration in the outflow tended to be slightly lower than the inflow. Concentrations of selenium in the dominant plant taxa in this wetlands were typical of ecosystems in the western United States and varied by taxa, tissue type, localized conditions (e.g., contact with selenium-laden water), and to a lesser extent, seasons. Selenium in the aquatic plant spiny naiad (Najas marina) was relatively high and may pose an ecological risk to wildlife during the late spring and summer. Additional work is underway investigating aquatic food chain accumulations of selenium as well as mass balance of selenium in the system.     

Risk management for assuring safe drinking water

Millions of people die every year around the world from diarrheal diseases much of which is caused by contaminated drinking water. By contrast, drinking water safety is largely taken for granted by many citizens of affluent nations. The ability to drink water that is delivered into households without fear of becoming ill may be one of the key defining characteristics of developed nations in relation to the majority of the world. Yet there is well-documented evidence that disease outbreaks remain a risk that could be better managed and prevented even in affluent nations. A detailed retrospective analysis of more than 70 case studies of disease outbreaks in 15 affluent nations over the past 30 years provides the basis for much of our discussion [Hrudey, S.E. and Hrudey, E.J. Safe Drinking Water--Lessons from Recent Outbreaks in Affluent Nations. London, UK: IWA Publishing; 2004.]. The insights provided can assist in developing a better understanding within the water industry of the causes of drinking water disease outbreaks, so that more effective preventive measures can be adopted by water systems that are vulnerable. This preventive feature lies at the core of risk management for the provision of safe drinking water.     

Extraction and Characterization of Microcrystalline Cellulose from Date Palm Fibers using Successive Chemical Treatments

Journal of Polymers and the Environment - The aim of present study is to extract microcrystalline cellulose (MCC) from fruit bunch branches fibers of Algerian date palm trees (phoenix dactylifera...     

Human reliability analysis: A critique and review for managers

In running our increasingly complex business systems, formal risk analyses and risk management techniques are becoming more important part to managers: all managers, not just those charged with risk management. It is also becoming apparent that human behaviour is often a root or significant contributing cause of system failure. This latter observation is not novel; for more than 30 years it has been recognised that the role of human operations in safety critical systems is so important that they should be explicitly modelled as part of the risk assessment of plant operations. This has led to the development of a range of methods under the general heading of human reliability analysis (HRA) to account for the effects of human error in risk and reliability analysis. The modelling approaches used in HRA, however, tend to be focussed on easily describable sequential, generally low-level tasks, which are not the main source of systemic errors. Moreover, they focus on errors rather than the effects of all forms of human behaviour. In this paper we review and discuss HRA methodologies, arguing that there is a need for considerable further research and development before they meet the needs of modern risk and reliability analyses and are able to provide managers with the guidance they need to manage complex systems safely. We provide some suggestions for how work in this area should develop. But above all we seek to make the management community fully aware of assumptions implicit in human reliability analysis and its limitations.