The call of different wilds: the importance of definition and perception in protecting and managing Scottish wild landscapes

Concepts of wild land have recreational, ecological and cultural dimensions, and place varying emphasis on physical landscape attributes and the perceptions of users. In Scotland, national and NGO policies show reasonable consistency in interpreting and defining ‘wild land’, emphasising the (perception of) lack of current human influence as a key criterion. This research used semi-structured interviews with key individuals and a questionnaire survey of land managers to evaluate concepts and perceptions of wild land in Scotland. Recognising that the conceptual and spatial definition of wild land is a key issue, a new typology is proposed. Weaknesses in the policy framework, as well as key potential threats to, and opportunities associated with, wild landscapes are identified. Management initiatives are fitted to the typology and divided into four management themes. Key recommendations are: (i) that national policy for wild landscapes needs to incorporate criteria, which recognise the multiple values deriving from such areas; and (ii) that future research should combine user group preferences with physical attribute information in determining what constitutes wild landscapes.     

Elemental Contamination of Rainwater by Airborne Dust in Tamale Township Area of the Northern Region of Ghana

Rainwater samples were collected from Tamale town in the 1997 and 1998 rainy seasons. During this period road construction in the Tamale area resulted in the generation of suspended dust in the atmosphere. Analysis of the samples for major ions showed elevated levels of Cl^–. Ion ratios with Cl^– (Na⁺/Cl^–, K⁺/Cl^–, Ca²⁺/Cl^–/Cl^– Mg²⁺/Cl^– and SO₄ ^2–/Cl^–) in rainwater samples were higher than the corresponding ratios in seawater. Some samples also showed elevated concentrations of Fe, Mn, Al and Zn, all of which except Zn showed a correlation with the dry periods between rainfall events. Consequently, it was concluded that dust generated from lateritic soils was probably the major cause of the increase in concentration of these metals. Aluminium and Fe concentrations were observed to be higher than the World Health Organization drinking water guide limits.     

Airbag for the closing of pipelines on explosions and leakages

This paper is a result of international effort aimed at the construction of a device for quick closing of pipelines in the case of explosion propagation and/or chemical leakage. Such a problem exists in industries where flammable substances are transported by pipelines. The basic solution principle was the idea to use airbags similar to those utilized in cars.

Two pipeline applications were taken into consideration: a low-pressure module able to suppress explosion propagation and a high-pressure module to stop leakages from, e.g. natural gas pipeline capable to be used for duct diameters up to 0.6 m, pressures up to 5 MPa and reaction times of 50 ms. It was necessary to construct a new airbag, capable of withstanding up to 10 bar pressure. The choice of material was critical to ensure sufficient strength and chemical resistance while retaining impermeability.

CFD modeling of the bag deployment into a pipe flow and analysis of the bag shapes was also completed. Two gas generators were constructed and tested with novel propellant materials.

Different airbag models were tested to evaluate their effectiveness. Risk analysis approach was applied to evaluate the safety and economic benefits of the new technology in different fields of application.     

Manipulation of dietary protein and nonstarch polysaccharide to control swine manure emissions

Odor and greenhouse gas (GHG) emissions from stored pig (Sus scrofa) manure were monitored for response to changes in the crude protein level (168 or 139 g kg(-1), as-fed basis) and nonstarch polysaccharide (NSP) content [i.e., control, or modified with beet pulp (Beta vulgaris L.), cornstarch, or xylanase] of diets fed to pigs in a production setting. Each diet was fed to one of eight pens of pigs according to a 2 x 4, full-factorial design, replicated over three time blocks with different groups of animals and random assignment of diets. Manure from each treatment was characterized and stored in a separate, ventilated, 200-L vessel. Repeated measurements of odor, carbon dioxide (CO2), methane (CH4), and nitrous oxide (N2O) emissions from the vessels were taken every two weeks for eight weeks. Manure from high-protein diets had higher sulfur concentration and pH (P < or = 0.05). High-NSP (beet pulp) diets resulted in lower manure nitrogen and ammonia concentrations and pH (P < or = 0.05). Odor level and hedonic tone of exhaust air from the storage vessel headspaces were unaffected by the dietary treatments. Mean CO2 and CH4 emissions (1400 and 42 g d(-1) m(-3) manure, respectively) increased with lower dietary protein (P < or = 0.05). The addition of xylanase to high-protein diets caused a decrease in manure CO2 emissions, but an increase when added to low-protein diets (P < or = 0.05). Nitrous oxide emissions were negligible. Contrary to other studies, these results do not support the use of dietary protein reduction to reduce emissions from stored swine manure.     

Density-gradient centrifugation as an aid to sorting planktonic organisms. I. Gradient materials

Fish eggs and larvae can be separated from invertebrate zooplankton by isopycnic centrifugation in gradients of sucrose or silica. Preserved samples of invertebrate zooplankton, fish eggs, and fish larvae, representing a typical assortment of marine plankton, were layered over linear gradients of 25 to 60% w/w (weight/weight) sucrose or 0 to 15% w/w silica (as Ludox AM) in 100 c³ swinging buckets, and centrifuged for 1 h at 1000 rpm (revs per minute). In sucrose gradients, the invertebrate zooplankton were confined to the two ends of the gradient, while 85% of the fish eggs were recovered from an intermediate zone (27.5 to 55% w/w). In Ludox AM, the fish eggs banded in a narrow region between 2 and 3% w/w, while fish larvae banded at the bottom of the gradient between 10 and 14% w/w. Of the 6 dominant classes of zooplankton, only Salpa overlapped appreciably with the fish eggs and none overlapped with the fish larvae. Of the gradient materials tested, Ludox AM offers the most advantages; sucrose may also be useful for subfractionation. Gradients of sodium bromide and dextran have been found to be totally unsuitable.Paper of the Journal Series, New Jersey Agricultural Experiment Station, Rutgers University, New Brunswick, New Jersey 08903, USA.     

Air emission flux from contaminated dredged materials stored in a pilot-scale confined disposal facility

A pilot-scale field simulation was conducted to estimate the air emissions from contaminated dredged material stored in a confined disposal facility (CDF). Contaminated dredged material with a variety of organic chemicals, obtained from Indiana Harbor Canal, was used in the study. It was placed in an outdoor CDF simulator (i.e., a lysimeter of dimensions 4 ft x 4 ft x 2 ft). A portable, dynamic flux chamber was used to periodically measure emissions of various polynuclear aromatic hydrocarbons (PAHs). A weather station was set up to monitor and record the meteorological conditions during the experiment. The fluxes of several PAHs were monitored over time for 6 1/2 months. Initial 6-hr average fluxes varied from 2 to 20 ng/cm2/hr for six different PAHs. The flux values declined rapidly for all compounds soon after placement of the dredged material in the CDE Chemical concentrations derived from flux values were generally of low magnitude compared with ambient standards. Data obtained from the experiment were compared against those predicted using models for air emissions. Model simulations showed that initially the flux was largely from exposed pore water from saturated (wet) sediment, whereas the long-term flux was controlled by diffusion through the pore air of the unsaturated sediment. Model predictions generally overestimated the measured emissions. A rainfall event was simulated, and the dredged material was reworked to simulate that typical of a CDF operation. Increased flux was observed upon reworking the dredged material.     

Demonstrating PM<Subscript>2.5</Subscript> and road-side dust pollution by heavy metals along Thika superhighway in Kenya,sub-Saharan Africa

This study assessed the level of heavy metal in roadside dust and PM_2.5 mass concentrations along Thika superhighway in Kenya. Thika superhighway is one of the busiest roads in Kenya, linking Thika town with Nairobi. Triplicate road dust samples collected from 12 locations were analysed for lead (Pb), chromium (Cr), cadmium (Cd), nickel (Ni), zinc (Zn), and copper (Cu) using atomic absorption spectrophotometry (AAS). PM_2.5 samples were collected on pre-weighed Teflon filters using a BGI personal sampler and the filters were then reweighed. The ranges of metal concentrations were 39–101 μg/g for Cu, 95–262 μg/g for Zn, 9–28 μg/g for Cd, 14–24 μg/g for Ni, 13–30 μg/g for Cr, and 20–80 μg/g for Pb. The concentrations of heavy metals were generally highly correlated, indicating a common anthropogenic source of the pollutants. The results showed that the majority of the measured heavy metals were above the background concentration, and in particular, Cd, Pb, and Zn levels indicated moderate to high contamination. Though not directly comparable due to different sampling timeframes (8 h in this study and 24 h for guideline values), PM_2.5 for all sites exceeds the daily WHO PM_2.5 guidelines of 25 μg/m³. This poses a health risk to people using and working close to Thika superhighway, for example, local residents, traffic police, street vendors, and people operating small businesses. PM_2.5 levels were higher for sites closer to Nairobi which could be attributed to increased vehicular traffic towards Nairobi from Thika. This study provides some evidence of the air pollution problem arising from vehicular traffic in developing parts of the world and gives an indication of the potential health impacts. It also highlights the need for source apportionment studies to determine contributions of anthropogenic emissions to air pollution, as well as long-term sampling studies that can be used to fully understand spatiotemporal patterns in air pollution within developing regions.     

Evaluating weather effects on interannual variation in net ecosystem productivity of a coastal temperate forest landscape: A model intercomparison

Forest productivity is strongly affected by seasonal weather patterns and by natural or anthropogenic disturbances. However weather effects on forest productivity are not currently represented in inventory-based models such as CBM-CFS3 used in national forest C accounting programs. To evaluate different approaches to modelling these effects, a model intercomparison was conducted among CBM-CFS3 and four process models (ecosys, CN-CLASS, Can-IBIS and 3PG) over a 2500 ha landscape in the Oyster River (OR) area of British Columbia, Canada. The process models used local weather data to simulate net primary productivity (NPP), net ecosystem productivity (NEP) and net biome productivity (NBP) from 1920 to 2005. Other inputs used by the process and inventory models were generated from soil, land cover and disturbance records. During a period of intense disturbance from 1928 to 1943, simulated NBP diverged considerably among the models. This divergence was attributed to differences among models in the sizes of detrital and humus C stocks in different soil layers to which a uniform set of soil C transformation coefficients was applied during disturbances. After the disturbance period, divergence in modelled NBP among models was much smaller, and attributed mainly to differences in simulated NPP caused by different approaches to modelling weather effects on productivity. In spite of these differences, age-detrended variation in annual NPP and NEP of closed canopy forest stands was negatively correlated with mean daily maximum air temperature during July-September (T_amax) in all process models (R² = 0.4-0.6), indicating that these correlations were robust. The negative correlation between T_amax and NEP was attributed to different processes in different models, which were tested by comparing CO₂ fluxes from these models with those measured by eddy covariance (EC) under contrasting air temperatures (T_a). The general agreement in sensitivity of annual NPP to T_amax among the process models led to the development of a generalized algorithm for weather effects on NPP of coastal temperate coniferous forests for use in inventory-based models such as CBM-CFS3: NPP′ = NPP − 57.1 (T_amax − 18.6), where NPP and NPP′ are the current and temperature-adjusted annual NPP estimates from the inventory-based model, 18.6 is the long-term mean daily maximum air temperature during July-September, and T_amax is the mean value for the current year. Our analysis indicated that the sensitivity of NPP to T_amax was nonlinear, so that this algorithm should not be extrapolated beyond the conditions of this study. However the process-based methodology to estimate weather effects on NPP and NEP developed in this study is widely applicable to other forest types and may be adopted for other inventory based forest carbon cycle models.     

Coastal Flood Inundation Monitoring with Satellite C‐band and L‐band Synthetic Aperture Radar Data

Satellite Synthetic Aperture Radar (SAR) was evaluated as a method to operationally monitor the occurrence and distribution of storm‐ and tidal‐related flooding of spatially extensive coastal marshes within the north‐central Gulf of Mexico. Maps representing the occurrence of marsh surface inundation were created from available Advanced Land Observation Satellite (ALOS) Phased Array type L‐Band SAR (PALSAR) (L‐band) (21 scenes with HH polarizations in Wide Beam [100 m]) data and Environmental Satellite (ENVISAT) Advanced SAR (ASAR) (C‐band) data (24 scenes with VV and HH polarizations in Wide Swath [150 m]) during 2006‐2009 covering 500 km of the Louisiana coastal zone. Mapping was primarily based on a decrease in backscatter between reference and target scenes, and as an extension of previous studies, the flood inundation mapping performance was assessed by the degree of correspondence between inundation mapping and inland water levels. Both PALSAR‐ and ASAR‐based mapping at times were based on suboptimal reference scenes; however, ASAR performance seemed more sensitive to reference‐scene quality and other types of scene variability. Related to water depth, PALSAR and ASAR mapping accuracies tended to be lower when water depths were shallow and increased as water levels decreased below or increased above the ground surface, but this pattern was more pronounced with ASAR. Overall, PALSAR‐based inundation accuracies averaged 84% (n = 160), while ASAR‐based mapping accuracies averaged 62% (n = 245).