Removal of Pb2+ from water using the carbon nanotube-g-poly[(sodium methacrylate)-co- 2-(methacryloyloxy)ethyl acetoacetate]: experimental investigation and modeling

Environmental Science and Pollution Research - A solid polymer, poly[(sodium methacrylate)-co-2-(methacryloyloxy)ethyl acetoacetate], p(MAA-co-MEAA) was synthesized and then grafted onto carbon...     

A modified exergy evaluation of using carbon-black/water/EG nanofluids as coolant of photovoltaic modules

Environmental Science and Pollution Research - To provide the progressive global demand for energy, the use of renewable energies is being rapidly developed. Since solar radiation is available in...     

Benzene removal by nano magnetic particles under continuous condition from aqueous solutions

Benzene removal evaluated using Fe304 nano continuous condition. A 44 initial benzene concentration, from aqueous solutions was magnetic particles （NM） in factorial design including NM dose, contact time and pH was investigated in 16 experiments （Taguchi OA design）. The results indicated that all factors were significant and the optimum condition was： pH 8, NM dose of 2000 mg.L-1, benzene concentrations of 100 mg.L-1 and contact time of 14min. The maximum benzene uptake and distribution ratio in the optimum situation were 49.4mg.g-1 and 38.4L.g-1, respectively. The nano particles were shown to capture 98.7% of the benzene in optimum batch condition and 94.5% in continuous condition. The isotherm data proved that the Bmnauer-Emmett-Teller model fit more closely and produced an isotherm constant （b） less than one, indicating favorable adsorption. Regeneration studies verified that the benzene adsorbed by the NM could be easily desorbed by temperature, and thereby, NM can be employed repeatedly in water and wastewater management.     

Emission and life-cycle assessment of alternative-fuel buses: a case study of the Delaware Authority of Regional Transit

The Energy Policy Act of 1992 motivated transit agencies to utilize alternative-fuel transit buses in addition to their popular diesel buses. Transit agencies have planned to add a significant number of alternative-fuel buses to their current transit fleets. This study is to inform policy makers who may allocate public funds for alternative-fuel bus projects to make a smarter decision in this regard. For each of the eight alternative-fuel buses, technologies introduced by the ACT, fuel efficiency, life-cycle cost (LCC) and emission are estimated and compared with the available information for the ultralow-sulfur diesel (ULSD) fuel buses. A case study in the State of Delaware is presented to demonstrate how the proposed approaches can be employed to evaluate the relative importance of the most viable alternative-fuel transit buses according to the predefined set of criteria. The results show that buses propelled by hybrid-diesel engine have the least LCC and emissions and are the most suitable alternative for the ULSD buses in the short- and midterm.     

Rheological Investigation of Wood-Polypropylene Composites in Rotational Plate Rheometer

In this research work, the rheological properties of Wood-Plastic Composites (WPC) with some selected compositions are investigated. WPC is being recognized as a green composite that, in the past 20?years, has emerged to a commercial product. A study on rheological properties of these materials can give insight into the proper selection of composition and processing condition. Two grades of polypropylene (PP) with two different melt flow indexes (MFI) were selected to prepare WPCs with three different wood contents (50, 60 and 70?% wt.). Four types of rheological experiments were performed utilizing a rotational plate rheometer: (1) strain sweep, (2) frequency sweep, (3) temperature sweep and (4) steady shear rate sweep. The independent variables were chosen as wood content, MFI of polymer (two types), melt temperature, frequency or shear rate, the gap between the plates, and strain percentage. The strain sweep tests specified the linear and non-linear viscoelastic zones of each experiment. The results of frequency sweep experiments indicated that increasing the wood content and frequency and also decreasing the strain percentage and the gap distance, lead to an increase in the storage modulus. Regarding the loss modulus, wood percentage and the gap distance presented positive effects and strain percentage showed a negative effect. The behavior of complex viscosity was almost similar to that of the storage modulus but increasing the frequency caused a decrease in the complex viscosity. In case of temperature sweep experiments, it was observed that the rheological properties exhibit a rapid change near to a temperature of 160?°C. The results also showed that beyond this point, increasing the wood content and also MFI of polypropylene caused an increase in the storage modulus. The results of steady shear rate sweep experiments specified that increasing wood content and also decreasing the MFI of PP, the gap distance and shear rate lead to an increase in both viscosity and shear stress.     

Physiological characteristics of <Emphasis Type="Italic">Plantago major</Emphasis> under SO<Subscript>2</Subscript> exposure as affected by foliar iron spray

Sulfur dioxide (SO₂) is considered as a main air pollutant in industrialized areas that can damage vegetation. In the present study, we investigated how exposure to SO₂ and foliar application of iron (Fe) would affect certain physiological characteristics of Plantago major. The plant seedlings exposed or unexposed to SO₂ (3900 μg m^?3) were non-supplemented or supplemented with Fe (3 g L^?1) as foliar spray. Plants were exposed to SO₂ for 6 weeks in 100 × 70 × 70 cm chambers. Fumigation of plants with SO₂ was performed for 3 h daily for 3 days per week (alternate day). Lower leaf Fe concentration in the plants exposed to SO₂ at no added Fe treatment was accompanied with incidence of chlorosis symptoms and reduced chlorophyll concentration. No visible chlorotic symptoms were observed on the SO₂-exposed plants supplied with Fe that accumulated higher Fe in their leaves. Both at with and without added Fe treatments, catalase (CAT) and peroxidase (POD) activity was higher in the plants fumigated with SO₂ in comparison with those non-fumigated with SO₂. Foliar application of Fe was also effective in increasing activity of antioxidant enzymes CAT and POD. Exposure to SO₂ led to reduced cellulose but enhanced lignin content of plant leaf cell wall. The results obtained showed that foliar application of Fe was effective in reducing the effects of exposure to SO₂ on cell wall composition. In contrast to SO₂, application of Fe increased cellulose while decreased lignin content of the leaf cell wall. This might be due to reduced oxidative stress induced by SO₂ in plants supplied with Fe compared with those unsupplied with Fe.     

Reducing As availability in calcareous soils using nanoscale zero valent iron

Environmental Science and Pollution Research - Different methods, including the use of nanoscale zero-valent iron (NZVI), have been used to treat arsenic (As)-contaminated environments, with much...     

Adsorption of Crystal Violet Dye from Aqueous Solution by Poly(Acrylamide-<Emphasis Type="Italic">co</Emphasis>-Maleic Acid)/Montmorillonite Nanocomposite

Poly(acrylamide-co-maleic acid)/montmorillonite nanocomposites, were synthesized via in situ polymerization with different maleic acid and MMT content. The capability of the hydrogel for adsorption of crystal violet (CV) was investigated in aqueous solutions at different pH values and temperatures. The pseudo-second-order kinetics model could fit successfully the adsorption kinetic data. The effects of maleic acid to acrylamide molar ratio (MA_R), weight percent of MMT (MMT%), the pH of medium and the solution temperature (T) on the CV adsorption capacity (q _e ) of adsorbents were studied by Taguchi experimental design approach. The results indicated that increasing the MMT% leads to a greater q _e . The q _e value of adsorbents increased also with increasing both MA_R and pH, while reduced when the temperature of medium increased. The relatively optimum conditions to achieve a maximum CV adsorption capacity for P(AAm/MA)/MMT adsorbents were found as: 0.06 for MA_R and 5 % of MMT%, medium pH = 7 and T = 20 °C.