The mobile source effect on curbside 1,3-butadiene,benzene, and particle-bound polycyclic aromatic hydrocarbons assessed at a tollbooth

On-road mobile sources contribute substantially to ambient air concentrations of the carcinogens 1,3-butadiene, benzene, and polycyclic aromatic hydrocarbons (PAHs). The current study measured benzene and 1,3-butadiene at the Baltimore Harbor Tunnel tollbooth over 3-hr intervals on seven weekdays (n = 56). Particle-bound PAH was measured on a subset of three days. The 3-hr outdoor 1,3-butadiene levels varied according to time of day and traffic volume. The minimum occurred at night (12 a.m.-3 a.m.) with a mean of 2 microg/m3 (SD = 1.3, n = 7), while the maximum occurred during the morning rush hour (6 a.m.-9 a.m.) with a mean of 11.9 microg/m3 (SD = 4.6, n = 7). The corresponding traffic counts were 1413 (SD = 144) and 16,893 (SD = 692), respectively. During the same intervals, mean benzene concentration varied from 3 microg/m3 (SD = 3.1, n = 7) to 22.3 microg/m3 (SD = 7.6, n = 7). Median PAH concentrations ranged from 9 to 199 ng/m3. Using multivariate regression, a significant association (p < 0.001) between traffic and curbside concentration was observed. Much of the pollutant variability (1,3-butadiene 62%, benzene 77%, and PAH 85%) was explained by traffic volume, class, and meteorology. Results suggest > 2-axle vehicles emit 60, 32, and 9 times more PAH, 1,3-butadiene, and benzene, respectively, than do 2-axle vehicles. This study provides a model for estimating curbside pollution levels associated with traffic that may be relevant to exposures in the urban environment.     

Benzene removal by nano magnetic particles under continuous condition from aqueous solutions

Benzene removal evaluated using Fe304 nano continuous condition. A 44 initial benzene concentration, from aqueous solutions was magnetic particles （NM） in factorial design including NM dose, contact time and pH was investigated in 16 experiments （Taguchi OA design）. The results indicated that all factors were significant and the optimum condition was： pH 8, NM dose of 2000 mg.L-1, benzene concentrations of 100 mg.L-1 and contact time of 14min. The maximum benzene uptake and distribution ratio in the optimum situation were 49.4mg.g-1 and 38.4L.g-1, respectively. The nano particles were shown to capture 98.7% of the benzene in optimum batch condition and 94.5% in continuous condition. The isotherm data proved that the Bmnauer-Emmett-Teller model fit more closely and produced an isotherm constant （b） less than one, indicating favorable adsorption. Regeneration studies verified that the benzene adsorbed by the NM could be easily desorbed by temperature, and thereby, NM can be employed repeatedly in water and wastewater management.     

Analysis of gross alpha, gross beta activities and beryllium-7 concentrations in surface air: their variations and statistical prediction model

Measurement of gross α, gross β activities and cosmogenic beryllium-7 (⁷Be) concentrations were made both daily and weekly during the years 2001–2004 from samples of atmospheric aerosols filtered from the air at Tehran Nuclear Research Center (35 41′ N) and Zahedan (28 29′ N). Weekly aerosol samples collected with the high-volume air samplers on cellulose filters were used to determine the ⁷Be contents of samples, using a semiconductor gamma spectrometer. Airborne dust samples were collected daily on fiber glass filters and used to determine the gross β and gross α activities with automatic beta analyzer and a ZnS(Ag) counter, respectively. In this work, the concentration and meteorological data were used to determine models for gross α, gross β and ⁷Be. The air concentrations of gross β and gross α activities and ⁷Be concentrations displayed lognormal distributions during the study period. Both β and ⁷Be have maximum activity concentrations during warm mid-year months.     

A sustainable method for optimizing product design with trade-off between life cycle cost and environmental impact

In today’s competitive market, corporations have learned that taking sustainability issues into account can significantly improve their public image. Modern producers therefore must simultaneously reduce the environmental impact of their products and make economic gains. Therefore, making trade-offs between economic and environmental issues is required to ensure a company’s continuity. In doing so, companies have attached a great deal of importance to the new product design phase. However, optimization at the design stage becomes very complex for a product with a large number of parts, which can have several design alternatives with similar forms and functionality, but different costs and environmental impacts. In the automobile, shipbuilding and aircraft industries, if the conventional complete enumeration method is applied, the time required for selecting the optimal combination of design alternatives with respect to life cycle cost and environmental impact may exceed a human’s natural life span. To overcome this limitation, this paper introduces an optimization method for use as a design aid tool that enables a designer to assess the life cycle cost and environmental impact of his/her design very early in the product development process. To support the developed method, an illustration is provided using a case study on a locally manufactured automobile.     

Optimising of Scenedesmus sp. biomass production in chicken slaughterhouse wastewater using response surface methodology and potential utilisation as fish feeds

Production of Scenedesmus sp. biomass in chicken slaughterhouse wastewater (CSWW) is a promising alternative technique for commercial culture medium due to the high nutritional content of the generated biomass to be used as fish feeds. The current work deals with optimising of biomass production in CSWW using response surface methodology (RSM) as a function of two independent variables, namely temperature (10–30 °C) and photoperiod (6–24 h). The potential application of biomass yield as fish feeds was evaluated based on carbohydrate, protein and lipid contents. The results revealed that the best operating parameters for Scenedesmus sp. biomass production with high contents of carbohydrates, proteins and lipids were determined at 30 °C and after 24 h. The actual and predicted values were 2.47 vs. 3.09 g, 1.44 vs. 1.27 μg/mL, 29.9 vs. 31.60% and 25.75 vs. 28.44%, respectively. Moreover, the produced biomass has a high concentration of fatty acid methyl ester (FAME) as follows: 35.91% of C15:1; 17.58% of C24:1 and 14.11% of C18:1N9T. The biomass yields have 7.98% of eicosapentaenoic acid (EPA, C20:5N3) which is more appropriate as fish feeds. The Fourier transform infrared (FTIR) analysis of biomass revealed that the main functional groups included hydroxyl (OH), aldehyde (=C–H), alkanes and acyl chain groups. Scanning electron micrograph (SEM) and energy-dispersive X-ray spectroscopic analysis (EDS) indicated that the surface morphology and element distribution in biomass produced in BBM and CSWW were varied. The findings have indicated that the biomass produced in CSWW has high potential as fish feeds.

     

Evaluation of environmental impacts of large scale physical development in central Galilee: Role of experts and policy makers

This article reports on the content and process used to evaluate environmental impacts caused by the development of 50 new settlements in the central Galilee region in northern Israel between 1978 and 1988. Some 60 different environmental and developmental factors and their interrelationships were identified. Selected physical changes that were defined as impacts were later evaluated. The evaluation method was based on intensive use of interviews with resource scientists and decision makers as experts. The data from interviews were used as the basis for factors identification, impact screening, and their rating. Experts used three types of criteria in the latter process: intensity of impact, the potential for its mitigation and compatibility with existing natural resource conservation, and environmental quality protection policy. Researchers concluded that reliance on experts with broad local experience eliminated the need for a more structured and detailed assessment method. The case study shows that experts provided creditable and reliable findings. They substituted the need for long periods of observation and largescale and costly data gathering, analysis, and evaluation.     

Investigation of the effects of static magnetic field on apoptosis in bone marrow stem cells of rat

This research was carried out to evaluate the influence of static magnetic field on the rate of apoptosis in bone marrow stem cells (BMSCs) of rats. Extracted cells were suspended in αMEM as a culture media for 48 h. After that, cells were exposed to 15 mT static magnetic field (SMF) for 5 h, incessantly with or without FeCl₂. The rate of apoptosis was then assessed via flow cytometery. The results showed that either treatment with FeCl₂ or exposure to SMF enhanced the rate of apoptotic cells. Moreover, cells that were treated simultaneously with FeCl₂ and SMF have higher rate of apoptosis. An increase in apoptosis by 26.5% was induced by SMF alone and an increase in apoptosis by 28.2% was induced by a combination of FeCl₂ and SMF, compared to their corresponding controls. The results recommended that the effects of SMF on apoptosis may be related to increment of the number of free radicals in the cells.     

Minimum quantity lubrication in grinding: effects of abrasive and coolant–lubricant types

This research has been conducted to study the influence of the abrasive and coolant–lubricant types on the minimum quantity lubrication (MQL) grinding performance. One type of CBN and three types of conventional wheels (corundum) have been tested. The tests have been performed in presence of fluid, air jet and eleven types of coolant–lubricants, as well as, in dry condition. The results indicate that the finest surface quality and lower grinding forces could be obtained while grinding with CBN wheel. In case of conventional wheels, the coarser and high porosity wheels induce much proper grinding results. Furthermore, grinding when utilizing MQL with oil results in higher grinding performance.