Flow of chemical energy in Alwar jheel of Yamuna basin near Allahabad

The water quality, rate of energy transformation, chemical composition of producers and flow of chemical energy were studied in both feeding river Yamuna and Alwar jheel near Allahabad. As the river Yamuna had high value of alkalinity (210.0 mgl(-1)), conductance (518.0 micromhos), dissolved solids (260.0 mgl(-1)), hardness (162.0 mgl(-1)) and chloride (54.6 mgl(-1)) jheel also showed high values of these parameters. The rate of energy transformation from kinetic radiant energy to chemical energy was very high in the jheel 32,315 Cal m(-2) day(-1) of which 25,620 Cal m(-2) day(-1) was contributed by aquatic plants. Out of 11,764 x 10(4) Kcal ha(-1) yr(-1) total energy fixed in the system, producers stored 7,154 x 10(4) Kcal ha(-1) yr(-1) and the rest was lost as heat of respiration. The pattern of storage of energy was different in two groups of producers and thus most of the energy fixed by phytoplankton was stored as protein (56.2%) and less as carbohydrate (11.7%) while aquatic plants stored more energy as carbohydrate (40.8%) than protein (23.2%). The chemical energy obtained from the system was 1,85,000 Kcal ha(-1) yr(-1) and thus only 0.260% of the chemical energy stored by producers was harvested. The potential chemical energy resource in the jheel was 81.4 x 10(4) Kcal ha(-1) yr(-1) of which only 22.6% was harvested in the jheel and there is enough scope for further enhancement.     

Changes in earth’s dipole

The dipole moment of Earth’s magnetic field has decreased by nearly over the past 150 years and by about 30% over the past 2,000 years according to archeomagnetic measurements. Here, we explore the causes and the implications of this rapid change. Maps of the geomagnetic field on the core–mantle boundary derived from ground-based and satellite measurements reveal that most of the present episode of dipole moment decrease originates in the southern hemisphere. Weakening and equatorward advection of normal polarity magnetic field by the core flow, combined with proliferation and growth of regions where the magnetic polarity is reversed, are reducing the dipole moment on the core–mantle boundary. Growth of these reversed flux regions has occurred over the past century or longer and is associated with the expansion of the South Atlantic Anomaly, a low-intensity region in the geomagnetic field that presents a radiation hazard at satellite altitudes. We address the speculation that the present episode of dipole moment decrease is a precursor to the next geomagnetic polarity reversal. The paleomagnetic record contains a broad spectrum of dipole moment fluctuations with polarity reversals typically occurring during dipole moment lows. However, the dipole moment is stronger today than its long time average, indicating that polarity reversal is not likely unless the current episode of moment decrease continues for a thousand years or more.     

Chemical fractionation and heavy metal accumulation in the plant of Sesamum indicum (L.) var. T55 grown on soil amended with tannery sludge: Selection of single extractants

A pot experiment was carried out to study the single and sequential extractions of metals in different tannery sludge amendment and the potential of the plant of Sesamum indicum L. var. T55 (sesame) for the removal of metals from tannery waste contaminated site. The metal extraction efficiency obtained with each extractants was slightly different and follow the order; EDTA>DTPA>NH(4)NO(3)>NaNO(3)>CaCl(2). The correlation analysis between extractable metals in the different amendments of sludge and metal accumulation in the plant (lower and upper parts) showed better correlation for most of the tested metals with EDTA extraction. In this study, a sequential extraction technique was applied on different amendments of tannery sludge. The results showed that Mn, Zn, Cr and Cd were mostly associated with Fe-Mn oxide fraction in most of the amendments, K and Ni was found in residual (RES) fraction, Fe and Cu was bound with organic matter (OM) and RES fractions and Na was associated with carbonate (CAR) fraction. The metal accumulation after 60 d of growth of the plant was found in the order of K>Na>Fe>Zn>Cr>Mn>Cu>Pb>Ni>Cd and its translocation was found less in upper part. The accumulation of toxic metals (Cr, Ni and Cd) in the plants was found to increase with increase in sludge ratio, in contrast, the accumulation of Pb decreased. In view of growth parameters and metal accumulation in the plant, it was observed that lower amendments (25%) of tannery sludge were found suitable for the phytoremediation of most of the studied metals.     

Polycyclic aromatic hydrocarbons (PAHs) concentrations and related carcinogenic potencies in soil at a semi-arid region of India

A study of polycyclic aromatic hydrocarbons in surface soil was conducted at selected locations in Agra (semi-arid region of India) for a span of one year in order to ascertain the contamination levels. The concentrations of PAH were measured at four locations in the city of Agra, which covers industrial, residential, roadside and agricultural areas. The samples were extracted with hexane by ultrasonic agitation. The extracts were then fractioned on a silica-gel column and the aromatic fraction was subjected to HPLC. The average concentration of total PAH in all samples was 12.1 microg g(-1) and the range was from 3.1 microg g(-1) to 28.5 microg g(-1). The maximum concentrations of PAHs were found to be in winter season. The concentration of PAH decreased in the order chrysene > benzo(b)fluoranthene > fluoranthene. Factor analysis suggests that the mixed signature of all the sources are intermediate between vehicular and combustion activities.     

Studies on phytotoxic effect of aluminium on growth and some morphological parameters of Vigna radiata L. Wilczek

Aluminium toxicity is a major deterrent for plant growth in acid soils below pH 5.0. This study deals with effect of aluminium toxicity on growth of mungbean (Vigna radiata L. Wilczek) seedlings. Seed germination (in %) declined with increased content of Al2(SO4)3, while promotive effect was observed at very low dosage. Different concentrations of aluminum sulphate salt were applied to mungbean seeds. Measurement of aluminium content in mungbean leaves was done through atomic absorption spectrophotometer. Root length (root and hypocotyl length) and shoot length (shoot and epicotyl length) was measured at seven days old seedling stage. Different concentrations of Al2(SO4)3 were found to have significant effect both on shoot and root length. Leaf area, fresh and dry weight was significantly reduced. Increased stomatal frequency and trichome density with an increase in concentrations of Al2(S04)3 was observed through scanning electron microscope.     

Experimental investigation of groundwater contamination by surface sources: Determination of adsorption capacity,diffusion, and sorption potential of selected anions in different soils

The present study investigated the fate and transport of two significant anions through soil to explore their potential as groundwater contaminants. The retention properties of chloride and sulfate in soils having several significantly different characteristics (soil‐1 and soil‐2) were determined using adsorption test and adsorption‐diffusion column experiments. The maximum adsorption capacity of chloride was 3.7 and 1.16 mg/g, respectively, in soil‐1 and soil‐2, with organic matter (OM) content of 3.92% and 4.69%, respectively. The sulfate adsorption obtained was 24.09% and 13.83%, respectively, in the two soils. The anions exhibited monolayer adsorption in the soils with replacement of hydroxyl ions from soils as the major mechanism of adsorption. On the other hand, the adsorption capacities obtained from the adsorption‐diffusion column experiment were about 100 times lower compared to that of the column tests of both of the soils. The maximum adsorption capacity of chloride was 0.03 mg/g and 0.01 mg/g, respectively, in soil‐1 and soil‐2, whereas that of sulfate was 0.04 mg/g and 0.03 mg/g. The empirical relation for depth of penetration (d) from a known spillage onto the soil surface was determined as a function of sorption capacity (S) and initial anion concentration (C) as d = 0.0073e^(?57S)C and d = 0.0038e^(?35S)C for chloride and sulfate, respectively.     

Aerogels and metal–organic frameworks for environmental remediation and energy production

Environmental pollution and climate change are requiring new methods to clean pollutants and produce sustainable energy. Aerogels and metal organic frameworks are emerging as advanced porous materials with higher functionality, high surface area, high porosity and flexible chemistry. Aerogels are dried gels prepared using the sol–gel procedure, whereas metal organic frameworks are networks of organic ligands and metal ions connected by coordination bonds. Applications of aerogels include the removal of heavy metals, CO₂ capture and reduction, photodegradation of pollutants, air cleanup and water splitting. This article reviews the synthesis and types of aerogels and metal organic frameworks, and the application to pollutant removal, energy production including hydrogen, methane reforming, CO₂ conversion and NOx removal.     

Size exclusion chromatography for the removal of pigments from extracellular ligninolytic enzyme extracts from decayed wheat straw

Solid-state fermentation of wheat straw was carried out by a native white rot basidiomycete Daedaleopsis flavida strain 5A. Extract prepared from the 12-day decayed wheat straw contained extracellular ligninolytic enzymes like manganese peroxidase (MnP), manganese-independent peroxidase (MIP), lignin peroxidase (LiP) and laccase along with straw-degraded products and pigments. Sephacryl S-200 size exclusion chromatography in 16/100 column was used for the separation of these ligninolytic enzymes and straw-degraded products and pigments. Recovery of pigment-free ligninolytic enzyme activities as protein was 40% of the total proteins loaded and specific LiP activity increased 34 fold after size exclusion chromatography. Thus accurate estimation of LiP by veratryl alcohol oxidation assay was possible only after the removal of interfering pigments. The reproducibility of size exclusion chromatography is adjudged satisfactory from the consistent results obtained after seven repetitive uses of matrices.     

Destruction of cyanide waste solutions using chlorine dioxide,ozone and titania sol

Increasingly, there are severe environmental controls in the mining industry. Because of lack of technological advances, waste management practices are severely limited. Most of the wastes in the milling industrial effluents are known to contain cyanides and it is recognized that after extraction and recovery of precious metals, substantial amounts of cyanide are delivered to tailings ponds. The toxicity of cyanide creates serious environmental problems. In this paper we describe several methods for the treatment of cyanide solutions. These include: (1) cyanide destruction by oxidation with chlorine dioxide (ClO(2)) in a Gas-Sparged Hydrocyclone (GSH) reactor; (2) destruction of cyanide by ozone (O(3)) using a stirred batch reactor, and finally, (3) the photolysis of cyanide with UV light in presence of titania sol. In all cases excellent performance were observed as measured by the extent and of the destruction.     

ZnO-based heterostructures as photocatalysts for hydrogen generation and depollution: a review

Environmental Chemistry Letters - Energy shortage and escalating pollution are major challenges globally. Heterogeneous photocatalysis is one of the most cost-effective methods for producing...