Historical reconstruction of atmospheric lead pollution in central Yunnan province, southwest China: an analysis based on lacustrine sedimentary records

Atmospheric lead (Pb) pollution during the last century in central Yunnan province, one of the largest non-ferrous metal production centers in China, was reconstructed using sediment cores collected from Fuxian and Qingshui Lakes. Lead concentrations and isotopic ratios (²⁰⁷Pb/²⁰⁶Pb and ²⁰⁸Pb/²⁰⁶Pb) were measured in sediment cores from both lakes. The operationally defined chemical fractions of Pb in sediment core from Fuxian Lake were determined by the optimized BCR procedure. The chronology of the cores was reconstructed using ²¹⁰Pb and ¹³⁷Cs dating methods. Similar three-phase variations in isotopic ratios and enrichment factors of Pb were observed in the sediment cores from both lakes. Before the 1950s, the sediment data showed low ²⁰⁷Pb/²⁰⁶Pb and ²⁰⁸Pb/²⁰⁶Pb ratios and enrichment factors (EFs?=?~1), indicating that the sedimentary Pb was predominantly of lithogenic origin. However, these indices were increased gradually between the 1950s and the mid-1980s, implying an atmospheric Pb deposition. The EFs and isotopic ratios of Pb reached their peak during recent years, indicating aggravating atmospheric Pb pollution. The average anthropogenic Pb fluxes since the mid-1980s were estimated to be 0.032 and 0.053 g m^?2 year^?1 recorded in Fuxian and Qingshui cores, respectively. The anthropogenic Pb was primarily concentrated in the reducible fraction. Combining the results of Pb isotopic compositions and chemical speciations in the sediment cores and in potential sources, we deduced that recent aggravating atmospheric Pb pollution in central Yunnan province should primarily be attributed to regional emissions from non-ferrous metal production industries.     

Geotechnical and leaching properties of flowable fill incorporating waste foundry sand

Waste foundry sand (WFS) can be converted into flowable fill for geotechnical applications. In this study, WFS samples were obtained from 17 independent metal casting facilities with different casting processes, thus representing a good range of WFS properties. The laboratory studies include physical, geotechnical and leaching properties of flowable fills consisting of WFS, cement, and fly ash mixed to different water contents. The main properties measured include WFS physical properties (density, particle gradation, grain shape, and fine content), WFS flowable fill geotechnical properties (unconfined compressive strength, hydraulic conductivity, setting time, and bleeding), and the fill's leaching properties (heavy metals and organics in the bleed water and the leachate extracted from hardened WFS flowable fills). The test results indicate that in terms of the physical properties, most of the data fall within narrow ranges, although data from the copper/aluminum-based WFS samples might fall beyond the ranges. Geotechnical properties of WFS flowable fills in both fresh and hardened phases were verified conforming to the features of specified flowable fills. Material leaching analyses indicate that the toxicity of WFS flowable fills is below regulated criteria. A mix formulation range originated from this study is proposed for the design of WFS made flowable fill.     

TiO2-PTFE光催化膜的制备及性能

以聚四氟乙烯（PTFE）乳液和纳米TiO2粉末为原料,采用无水乙醇为溶剂,经辊压后与不锈钢网结合,制备了多孔固定化TiO2-PTFE光催化膜。膜性能研究结果表明,m（TiO2）：m（PTFE）=4时,光催化反应处理质量浓度为20mg／L的苯甲酸溶液,2h内TOC去除率高达81．3％。通过扫描电子显微镜观察,TiO2-PTFE光催化膜表面平整,且孔隙分布均匀。TiO2最佳负载量为15mg／cm2。在优化反应条件下同悬浮态TiO2光催化反应体系相比,TiO2-PTFE光催化膜对光源有更高的利用率,表现出更佳的催化活性。     

单甲脒饱和蒸气压的测定和估算

用气体的法测单甲脒在１５,２５,３５和４５℃时的饱和蒸气分别为０．２０２,０．５５４６,１．９５,６．２９Ｐａ;亨利常数计算值分别为６．３０×１０＾－４,１．６７×１０＾－３,５．６８×１０＾０－３和１．７８×１０＆－２,根据Ｃｌａｕｓｉｕｓ Ｃｌａｐｅｙｒｏｎ方程求出单甲脒在常温下气化热为８９．２ｋＪ．ｍｏｌ＾－１。     

氯酚与富里酸的缔合作用

本文用超滤膜方法证实氯酚与富里酸之间存在缔合作用,并计算出表观缔合常数在２．７＊１０＾３－－１２１＊１０＾３ｍｌ．ｇ＾－１范围内。实验结果表明”ＰＨ、富里酸含量,氯酚取代氯原子个数都能够影响Ｋ值的大小。     

Genotoxicity screening of the river Rasina in Serbia using the Allium anaphase–telophase test

Evaluation of the presence of genotoxic substances is especially important in rivers that serve as a source of drinking water. Nine water samples collected along the river Rasina in Serbia were analyzed for potential toxic and genotoxic effects using the Allium anaphase-telophase test. Inhibition of root growth relative to the negative control (synthetic water) was observed in all samples. Analysis of the genotoxic potential, through scoring anaphase and telophase aberrations, showed that in seven of the nine samples the level of aberrations was significantly increased relative to the negative control but was lower than that obtained for the positive control (methyl methanesulfonate). Changes in the relation between spindle and chromosome types of aberrations were found in some samples, indicating differences in the potential genotoxic substances present at the analyzed sites. The data, which were obtained from samples collected at the highest level of river water, warn that during periods of low flow the values could reach genotoxic activity. The Allium anaphase-telophase test can be recommended as an monitoring system, that can serve as the first alert for the presence of genotoxic environmental pollutants.     

Distribution and source analysis of aluminum in rivers near Xi’an City, China

To study the status and source of aluminum (Al) contamination, a total of 21 sampling sites along six rivers near Xi’an City (Shaanxi province, China) were investigated during 2008–2010. The results indicated that the average concentration of total Al (Al_t) in the six rivers increased by 1.6 times from 2008 to 2010. The spatial distribution of Al_t concentrations in the rivers near Xi’an City was significantly different, ranged from 367 μg/L (Bahe River) to 1,978 μg/L (Taiping River). The Al_t concentration was highest near an industrial area for pulp and paper-making (2,773 μg/L), where the Al level greatly exceeded the water quality criteria of both the USA (Criterion Continuous Concentration, 87 μg/L) and Canada (100 μg/L). The average concentration of inorganic monometric aluminum (Al_im) was 72 μg/L which would pose threats to fishes and other aquatic lives in the rivers. The concentrations of exchangeable Al (Al_ex) in the sediment of the Taiping River sampled were relatively high, making it to be an alternative explanation of increasing Al concentrations in the rivers near Xi’an City. Furthermore, an increasing Al level has been detected in the upstream watershed near Xi’an City in recent years, which might indicate another notable pollution source of Al.     

基于环境一号卫星的PM2.5浓度遥感反演研究

2014年12月29—30日,青岛市发生了一次空气污染过程,利用环境一号卫星CCD遥感影像数据和实测PM_(2.5)浓度数据,分析了该过程前后5 d的实测PM_(2.5)浓度与环境一号卫星CCD遥感影像的DN值之间的相关性,分别按日期和区域建立了反演模型。结果表明,按日期拟合反演模型相关系数为0.02~0.51,按区域拟合反演模型相关系数为0.01~0.80,总体来说,区域拟合结果较好。     

Development and Testing of 2D Finite Difference Model in Open Channels

This study develops a depth-averaged two-dimensional (2D) numerical model using a finite difference method (FDM) on a staggered grid. The governing equations were solved using the Marker and Cell method that was developed at the Los Alamos laboratories by Harlow and Welch in 1965. In the paper, an explicit FDM was used to solve the governing equations. A first-order approximation was used for the temporal derivative. Second-order central difference approximations were used for space discretization. The time step is limited by the Courant–Friedrichs–Lewy (CFL) condition. The time step used in this study depends on the grid spacing and velocity components in the x- and y-directions. The study is divided into two steps: the first step is to develop a depth-averaged 2D numerical model to simulate the flow process. The second constructs a module to calculate the bed load transport and simulate the river morphology in the areas that have steep slopes, torrents, and mountain rivers. Developed model was applied to the artificial channel and a flood event in the Asungjun River section of the mountainous Yangyang Namdae River (South Korea). General simulation results showed that the developed model was in good agreement with the observed data.     

水中色度测定的研究

针对目视比色法色度测定不足之处,利用分光光度法进行改进.(1)在天然水的测定中,研究了以往的380nm作最大吸收波长测吸光度方法的问题.寻找到最佳波长455nm,吸收池5cm测定天然水吸光度A.(2)在5～400℃测定温度对吸光度无影响,溶液浊度、pH值对吸光度测定的影响呈线性关系.(3)在工业废水的测定中,先扫描出其最大吸收波长,以仪器检测限吸光度0.010为稀释终点.改进废水稀释倍数法.