Wave hydrodynamics around a multi-functional artificial reef at Leirosa

This paper describes an application of the Boussinesq-type COULWAVE model to study the wave hydrodynamics in the vicinity of a multi-functional artificial reef (MFAR). This reef is under investigation and consists of a supplementary protection solution for the Leirosa sand dune system located at South of Figueira da Foz, on the Portuguese West coast. Such installation near the coastline is expected to contribute to enhance the surfing conditions in the area, protect the sand dune system in the surroundings of Leirosa beach, and increase its environmental value. Numerical calculations with the COULWAVE model were performed for four test cases, considering two reef geometries (differing in the reef angle) and two incident wave conditions (storm condition and a common wave condition). Comparisons between the results obtained, in terms of wave heights and breaking line positions allow us to assess the influence of the reef on the hydrodynamics near the beach and around the reef. Moreover, the reef performance was analysed in terms of surfability and coastal protection. The surfability parameters (breaker height, Iribarren number and peel angle) were calculated for each test case using the numerical wave heights, wave directions and wave breaking positions. Comparisons of parameters allow characterizing the most appropriate configuration of the reef to improve the surfing conditions in the study area. A methodology based on numerical free surface elevations and horizontal velocity components was developed to calculate wave directions, since this is not a direct output of the COULWAVE model. Concerning coastal protection, analyses of the mean currents around the reef were used together with observations of the velocity cells near the shoreline as an indication of the sediment transport.     

A new model for climate system analysis: Outline of the model and application to palaeoclimate simulations

We present a new reduced-form model for climate system analysis. This model, called CLIMBER-2 (for CLIMate and BiosphERe, level 2), fills the current gap between simple, highly parameterized climate models and computationally expensive coupled models of global atmospheric and oceanic circulation. We outline the basic assumptions implicit in CLIMBER-2 and we present examples of climate system analysis including a study of atmosphere–ocean interaction during the last glacial maximum, an analysis of synergism between various components of the climate system during the mid-Holocene around 6000 years ago, and a transient simulation of climate change during the last 8000 years. These studies demonstrate the feasibility of a computationally efficient analysis of climate system dynamics which is a prerequisite for future climate impact research and, more generally, Earth system analysis, i.e., the analysis of feedbacks between our environment and human activities.     

Biochar and hydrochar effects on greenhouse gas (carbon dioxide, nitrous oxide, and methane) fluxes from soils

With a growing world population and global warming, we are challenged to increase food production while reducing greenhouse gas (GHG) emissions. We studied the effects of biochar (BC) and hydrochar (HC) produced via pyrolysis or hydrothermal carbonization, respectively, on GHG fluxes in three laboratory incubation studies. In the first experiment, ryegrass was grown in sandy loam mixed with equal amounts of a nitrogen-rich peanut hull BC, compost, BC+compost, double compost, or no addition (control); wetting-drying cycles and N fertilization were applied. Biochar with or without compost significantly reduced NO emissions and did not change the CH uptake, whereas ryegrass yield was significantly increased. In the second experiment, 0% (control) or 8% (w/w) of BC (peanut hull, maize, wood chip, or charcoal) or 8% HC (beet chips or bark) was mixed into a soil and incubated at 65% water-holding capacity (WHC) for 140 d. Treatments included simulated plowing and N fertilization. All BCs reduced NO emissions by ～60%. Hydrochars reduced NO emissions only initially but significantly increased them after N fertilization to 302% (HC-beet) and 155% (HC-bark) of the control emissions, respectively. Large HC-associated CO emissions suggested that microbial activity was stimulated and that HC was less stable than BC. In the third experiment, nutrient-rich peanut hull BC addition and incubation over 1.5 yr at high WHCs did not promote NO emissions. However, NO emissions were significantly increased with BC after NHNO addition. In conclusion, BC reduced NO emissions and improved the GHG-to-yield ratio under field-relevant conditions. However, the risk of increased NO emissions with HC addition must be carefully evaluated.     

Rain forest fragmentation and the proliferation of successional trees

The effects of habitat fragmentation on diverse tropical tree communities are poorly understood. Over a 20-year period we monitored the density of 52 tree species in nine predominantly successional genera (Annona, Bellucia, Cecropia, Croton, Goupia, Jacaranda, Miconia, Pourouma, Vismia) in fragmented and continuous Amazonian forests. We also evaluated the relative importance of soil, topographic, forest dynamic, and landscape variables in explaining the abundance and species composition of successional trees. Data were collected within 66 permanent 1-ha plots within a large (approximately 1000 km2) experimental landscape, with forest fragments ranging from 1 to 100 ha in area. Prior to forest fragmentation, successional trees were uncommon, typically comprising 2-3% of all trees (> or =10 cm diameter at breast height [1.3 m above the ground surface]) in each plot. Following fragmentation, the density and basal area of successional trees increased rapidly. By 13-17 years after fragmentation, successional trees had tripled in abundance in fragment and edge plots and constituted more than a quarter of all trees in some plots. Fragment age had strong, positive effects on the density and basal area of successional trees, with no indication of a plateau in these variables, suggesting that successional species could become even more abundant in fragments over time. Nonetheless, the 52 species differed greatly in their responses to fragmentation and forest edges. Some disturbance-favoring pioneers (e.g., Cecropia sciadophylla, Vismia guianensis, V. amazonica, V. bemerguii, Miconia cf. crassinervia) increased by >1000% in density on edge plots, whereas over a third (19 of 52) of all species remained constant or declined in numbers. Species responses to fragmentation were effectively predicted by their median growth rate in nearby intact forest, suggesting that faster-growing species have a strong advantage in forest fragments. An ordination analysis revealed three main gradients in successional-species composition across our study area. Species gradients were most strongly influenced by the standlevel rate of tree mortality on each plot and by the number of nearby forest edges. Species-composition also varied significantly among different cattle ranches, which differed in their surrounding matrices and disturbance histories. These same variables were also the best predictors of total successional-tree abundance and species richness. Successional-tree assemblages in fragment interior plots (>150 m from edge), which are subjected to fragment area effects but not edge effects, did not differ significantly from those in intact forest, indicating that area effects per se had little influence on successional trees. Soils and topography also had little discernable effect on these species. Collectively, our results indicate that successional-tree species proliferate rapidly in fragmented Amazonian forests, largely as a result of chronically elevated tree mortality near forest edges and possibly an increased seed rain from successional plants growing in nearby degraded habitats. The proliferation of fast-growing successional trees and correlated decline of old-growth trees will have important effects on species composition, forest dynamics, carbon storage, and nutrient cycling in fragmented forests.     

Dynamics of the head of gravity currents

The present work experimentally investigates the dynamics of unsteady gravity currents produced by lock-release of a saline mixture into a fresh water tank. Seven different experimental runs were performed by varying the density of the saline mixture in the lock and the bed roughness. Experiments were conducted in a Perspex flume, of horizontal bed and rectangular cross section, and recorded with a CCD camera. An image analysis technique was applied to visualize and characterize the current allowing thus the understanding of its general dynamics and, more specifically, of the current head dynamics. The temporal evolution of both head length and mass shows repeated stretching and breaking cycles: during the stretching phase, the head length and mass grow until reaching a limit, then the head becomes unstable and breaks. In the instants of break, the head aspect ratio shows a limit of 0.2 and the mass of the head is of the order of the initial mass in the lock. The average period of the herein called breaking events is seen to increase with bed roughness and the spatial periodicity of these events is seen to be approximately constant between runs. The rate of growth of the mass at the head is taken as a measure to assess entrainment and it is observed to occur at all stages of the current development. Entrainment rate at the head decreases in time suggesting this as a phenomenon ruled by local buoyancy and the similarity between runs shows independence from the initial reduced gravity and bed roughness.     

Decabrominated diphenyl ether in river fish and sediment samples collected downstream an industrial park

Fish, sediment and water samples from different places along the Spanish River Vero, a tributary of the Cinca River in the Ebro River basin, were collected in two different sampling campaigns, the first one during November 2004 and the second one in November 2005. The samples were collected up- and downstream from an industrial park. A total of 29 fishes, 6 sediments and 3 water samples were analyzed for polybrominated diphenyl ethers (PBDEs). Analytical work included 23 congeners, from tri- to deca-BDEs. The highest values for both sediment and fish samples were found downstream of the industrial park. High BDE-209 contamination was found in these sediment samples, with values up to 12 microg g(-1) dry weight. Moreover, BDE-209 was detected in 14 out of 15 biota samples collected downstream the industrial park, at concentration levels ranging from 20 to 707 ng g(-1) lipid weight, whereas it was not detected in samples collected upstream. These fish concentrations proved the bioavailability of BDE-209 and represented the highest deca-BDE values found in aquatic biota. The analysis of industrial effluents revealed that some industries contribute in some way to the BDE-209 contamination found in this area, but the industry focused on the polyamide polymerization is the main responsible.     

Passive air sampling for persistent organic pollutants: introductory remarks to the special issue

There have been a number of developments in the need, design and use of passive air samplers (PAS) for persistent organic pollutants (POPs). This article is the first in a Special Issue of the journal to review these developments and some of the data arising from them. We explain the need and benefit of developing PAS for POPs, the different approaches that can be used, and highlight future developments and needs.