Packed in-tube solid phase microextraction with graphene oxide supported on aminopropyl silica: Determination of target triazines in water samples

On-line in-tube solid phase microextraction (in-tube SPME) coupled to high performance liquid chromatography and tandem mass spectrometry (HPLC-MS/MS) was successfully applied to the determination of selected triazines in water samples. The method based on the employment of a packed column containing graphene oxide (GO) supported on aminopropyl silica (Si) showed that the extraction phase has a high potential for triazines extraction aiming to its physical-chemical properties including ultrahigh specific surface area, good mechanical and thermal stability and high fracture strength. Injection volume and loading time were both investigated and optimized. The method validation using Si-GO to extract and concentrate the analytes showed satisfactory results, good sensitivity, good linearity (0.2–4.0 µg L^?1) and low detection limits (1.1–2.9 ng L^?1). The high extraction efficiency was determined with enrichment factors ranging from 1.2–2.9 for the lowest level, 1.3–4.9 intermediate level and 1.2–3.0 highest level (n = 3). Although the analytes were not detected in the real samples evaluated, the method has demonstrated to be efficient through its application in the analysis of spiked triazines in ground and mineral water samples.     

Assessing strategies to mitigate phosphorus leaching from drained clay soils

Assessing mitigation of phosphorus (P) leaching from subsurface drainage systems is challenging due to high spatial and temporal variation in leaching. Mean measured total P leaching from a clayey soil in an eight-year study period (four replicates per treatment) was (kg ha^?1 year^?1): 1.21 from shallow autumn tillage (ShT), 0.84 from unfertilised fallow (UF), 0.81 from conventional autumn ploughing (CT) and 0.57 from structure liming (SL–CT). Treatment was not significant using Richards–Baker flow index or a distance factor as covariate (p = 0.084 and 0.057). A tendency for lower leaching was obtained comparing SL-CT with ShT (p _adjusted = 0.060 and 0.009 respectively). A combination of measures adapted to drainage conditions and clay content in different parts of the field is proposed since P leaching was approximately halved from an adjacent field (4.3 ha) in a three-year post-period compared with a three-year pre-period for structure liming the entire field and drainage system renovation plus structure lime drain backfilling.     

The perception of aquaculture on the Swedish West Coast

Efforts are on the way on the Swedish West Coast to develop the capacity for cultivation of marine resources, notably of kelps. Given that this is a region of great natural and national heritage, public opposition to marine developments has been identified as a possible risk factor. This survey thus sought to shed light on awareness levels, perceptions of different types of aquaculture and on reactions to a scenario depicting future aquaculture developments on the West Coast. When asked about their general opinions of aquaculture, respondents tended to be favourable though a majority chose neutral responses. On the whole, respondents were favourable to the depicted scenario. Finally, it was found that the high-awareness group tended to be more supportive than the low or medium-awareness groups, hinting at the benefits of increasing awareness to reduce public aversion and to support a sustainable development of aquaculture on the Swedish West Coast.     

Potential sources and meteorological factors affecting PM<Subscript>2.5</Subscript>-bound polycyclic aromatic hydrocarbon levels in six main cities of northeastern Italy: an assessment of the related carcinogenic and mutagenic risks

A yearlong sampling campaign (2012–2013) was conducted in six major cities of the Veneto region to investigate the spatial-temporal trends and the factors affecting the polycyclic aromatic hydrocarbon (PAHs) variations and identify the local sources. Sixty samples per city were collected for analyses in every alternate month (April, June, August, October, December, and February): 10 samples per sampling site in 10 consecutive days of the months selected. Samples were ultrasonically extracted with acetonitrile and processed through high-performance liquid chromatography. Total Σ-PAH concentrations ranged from 0.19 to 70.4 ng m^?3 with a mean concentration of 11.5 ng m^?3. The mean benzo[a]pyrene (BaP) concentration reached 2.0 ng m^?3, which is two-times higher than the limit set by the European Union. BaP contributed for 17.4% to the total concentration of PAHs, which showed the same pattern across the region with maxima during cold months and minima in the warm period. In this study, PAHs showed an inverse relationship with temperature, solar radiation, wind speed, and ozone. According to this study, biomass burning for household heating and cooking, followed by gaseous PAHs absorption on particles due to low atmospheric temperature, were the main reasons for increasing PAHs concentration in winter. Health risk, evaluated as lifetime lung cancer risk (LCR), showed a potential carcinogenic risk from the airborne BaP_TEQ six-fold higher in the cold season than in the warm one. Diagnostic ratios and conditional probability functions were used to locate the sources, and results confirmed that local emission, overall domestic heating, and road transport exhausts were responsible for higher concentration rates of PAHs as well as of PM_2.5.     

Trace analysis of parabens preservatives in drinking water treatment sludge,treated, and mineral water samples

Parabens have been widely used as antimicrobial agents, mainly in food products, pharmaceuticals, and cosmetics. Although they are known as safe preservatives, they also cause some harm to human health, which has been discussed lately. Therefore, the aim of this study was to evaluate the occurrence of nine parabens (including isomers) in mineral and drinking waters, besides in drinking water treatment sludge (DWTS) samples with determination by liquid chromatography tandem mass spectrometry (LC-MS/MS). Both methods solid phase extraction (SPE) and QuEChERS were validated. Calibration curves showed a correlation coefficient of 0.99 for all compounds. LOQ values ranged from 0.04 to 4 μg L^?1 in aqueous matrices and from 5 to 500 ng g^?1 in DWTS. Recoveries between 70 and 115% were reached with RSD below 20% for all compounds in SPE whereas recoveries between 62 and 119% were found with RSD below 20% for almost all compounds in QuEChERS. Matrix effect had low values (<?20%); it was only above 20% for methylparaben in the SPE and for pentylparaben in the QuEChERS. Using a quick and simple extraction procedures with SPE, QuEChERS, and LC-MS/MS analyses, these methods proved to be selective and sensitive. They were successfully applied to real samples (treated water, mineral water, and sludge), and methylparaben was detected at concentration levels below 0.242 μg L^?1 in mineral and treated water samples and 10 ng g^?1 in DWTS samples.     

Honeybees (<Emphasis Type="Italic">Apis mellifera</Emphasis>) as a biological barrier for contamination of honey by environmental toxic metals

The aim of the study was to investigate the transfer of toxic metals from honeybee workers (Apis mellifera L.) to bee honey in relation to the ecological state of the environment. The materials of the study consisted of samples of honeybee bodies and varietal honeys taken from the same apiary located in three areas: R1—urbanized (16), R2—ecologically clean (16) and R3—industrialized (15) of south-eastern Poland. The contents of 14 elements in all tested samples, including toxic metals (Cd, Pb, Hg, Al, Ni, Tl) as well as bioelements (K, Mg, Ca, Mn, Fe, Zn, Cu, Se), were analysed by the ICP-OES method with prior microwave mineralization. The concentrations of the majority of the studied elements, excluding aluminum and lead, were significantly higher in bee bodies than in honey samples (P?<?0.05). The pollution of bee bodies by toxic metals was dependent on the environmental cleanliness, and the most pollution was observed in the industrialized area. The bee body was the most effective barrier for Cd and Tl transfer to the honey, while the level of Ni was similar in both tested materials. The Al concentration was significantly higher in honey than bee bodies (14.81?±?24.69 and 6.51?±?5.83 mg kg^?1, respectively), which suggests the possibility of secondary contamination of honey. The greatest sensitivity to heavy metal pollution was observed in honeydew honey compared to nectar honeys (P?<?0.05). It was proved for the first time that bees work as biofilters for toxic metals and prevent honey contamination.     

The Influence of Artificial Photodegradation on Properties of Poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-3-hydroxyvalerate)(PHBV)/Graphite Nanosheets (GNS) Nanocomposites

The potential use of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/graphite nanosheets (GNS) as a biodegradable nanocomposite has been explored. PHBV/GNS nanocomposites films were prepared by solution casting at various concentrations of GNS—0.25, 0.50 and 1.00 wt% GNS. The films were exposed to artificial ultraviolet radiation (UV) during 52 h. The effect of GNS on PHBV photodegradation was investigated and compared to neat PHBV film. The artificial photodegradation induced changes in physical (weight loss), chemical carbonyl index by Fourier transform infrared spectroscopy, thermal degree of crystallinity and melting temperature by differential scanning calorimetry and morphological scanning electron microscopy characteristics. Based on the results obtained from aforementioned analyzes it was verified that GNS inhibits the oxidative degradation of PHBV matrix.     

Baked Foams Based on Cassava Starch Coated with Polyvinyl Alcohol with a Higher Degree of Hydrolysis

The aims of this work were to produce trays based on cassava starch, coated with polyvinyl alcohol (PVA) with a higher degree of hydrolysis (98%), and to study the effects of the coating on the mechanical and water sorption properties of the trays. Two types of PVA were tested: SELVOL? 325 (degree of polymerization?=?1000–1500) and SELVOL? 107 (degree of polymerization?=?350–650). A decrease in the water absorption capacity of 50% was observed when the coated samples were compared with the control sample after 30 min of immersion in water. It was observed in both coated samples a reduction of the initial rate of water adsorption sorption and a decrease in hydrophilicity compared with the control sample. Tensile strength and elongation were increased with application of the coatings. The use of the two types of PVA resulted in materials with similar mechanical and water sorption properties.     

Effects of physical exercise on musculoskeletal disorders,stress and quality of life in workers

Background. The effect of physical exercise in the workplace (PEW) on health promotion of workers is contradictory. Objective. To evaluate the effects of the PEW in musculoskeletal disorders (MSDs), perception of stress and quality of life in workers. Methods. The participants were divided into two groups: control group (n?=?46) including non-participant workers of the PEW program, and PEW group (n?=?50) including workers who regularly participate in the exercise program. All workers answered the Nordic general questionnaire, the perceived stress scale and the quality-of-life questionnaire. Results. The PEW group reported a lower prevalence of MSDs for the trunk in the last 7 days and 12 months (p?=?0.021 and p?=?0.001, respectively), and for the upper limbs in the last 12 months (p?=?0.001) compared with the control group. The results for the perception of stress and quality of life showed no significant differences between the groups. Conclusion. PEW is a potential method to reduce MSDs in workers, but it was not efficient in reducing stress levels or improving the quality of life of the workers.     

Evaluation of give kids a boost: A school-based program to increase booster seat use among urban children in economically disadvantaged areas

Objective: This study evaluated the effectiveness of a series of 1-year multifaceted school-based programs aimed at increasing booster seat use among urban children 4–7 years of age in economically disadvantaged areas.

Methods: During 4 consecutive school years, 2011–2015, the Give Kids a Boost (GKB) program was implemented in a total of 8 schools with similar demographics in Dallas County. Observational surveys were conducted at project schools before project implementation (P₀), 1–4 weeks after the completion of project implementation (P₁), and 4–5 months later (P₂). Changes in booster seat use for the 3 time periods were compared for the 8 project and 14 comparison schools that received no intervention using a nonrandomized trial process.

The intervention included (1) train-the-trainer sessions with teachers and parents; (2) presentations about booster seat safety; (3) tailored communication to parents; (4) distribution of fact sheets/resources; (5) walk-around education; and (6) booster seat inspections.

The association between the GKB intervention and proper booster seat use was determined initially using univariate analysis. The association was also estimated using a generalized linear mixed model predicting a binomial outcome (booster seat use) for those aged 4 to 7 years, adjusted for child-level variables (age, sex, race/ethnicity) and car-level variables (vehicle type). The model incorporated the effects of clustering by site and by collection date to account for the possibility of repeated sampling.

Results: In the 8 project schools, booster seat use for children 4–7 years of age increased an average of 20.9 percentage points between P₀ and P₁ (P₀ = 4.8%, P₁ = 25.7%; odds ratio [OR] = 6.9; 95% confidence interval [CI], 5.5, 8.7; P < .001) and remained at that level in the P₂ time period (P₂ = 25.7%; P < .001, for P₀ vs. P₂) in the univariate analysis. The 14 comparison schools had minimal change in booster seat use. The multivariable model showed that children at the project schools were significantly more likely to be properly restrained in a booster seat after the intervention (OR = 2.7; 95% CI, 2.2, 3.3) compared to the P₀ time period and compared to the comparison schools.

Conclusion: Despite study limitations, the GKB program was positively associated with an increase in proper booster seat use for children 4–7 years of age in school settings among diverse populations in economically disadvantaged areas. These increases persisted into the following school year in a majority of the project schools. The GKB model may be a replicable strategy to increase booster seat use among school-age children in similar urban settings.