Morphological abnormalities in frogs from a rice-growing region in NSW, Australia, with investigations into pesticide exposure

Three frog species (Limnodynastes tasmaniensis, Limnodynastes fletcheri and Litoria raniformis) were surveyed in rice bays of the Coleambally Irrigation Area (CIA), NSW, Australia, during the rice-growing seasons of 2005/2006 and 2006/2007. A total external morphological abnormality index of 7.0% was observed in frogs of the CIA (n?=?1,209). The types and frequencies of abnormalities were typical of reports from agricultural areas with ectrodactyly being the most common aberration. A relatively low abnormality index of 1.2% was observed in L. raniformis (n?=?87) compared to indices of 7.1% and 8.2% observed in L. fletcheri (n?=?694) and L. tasmaniensis (n?=?428), respectively. No conclusive evidence was found of unnaturally high rates of intersex, gonadal maldevelopment or unbalanced sex ratios in any species. Rice bay surface waters differed significantly in mean pesticide concentrations of atrazine and metolachlor on farms growing rice and corn compared to farms with rice as the sole crop. However, the similar abnormality indices observed in recent metamorphs emerging from these two farm types provided no evidence to suggest a link between larval exposure to the measured pesticides and developmental malformations.     

Surveying drainage culvert use by carnivores: sampling design and cost�Cbenefit analyzes of track-pads vs. video-surveillance methods

Environmental assessment studies often evaluate the effectiveness of drainage culverts as habitat linkages for species, however, the efficiency of the sampling designs and the survey methods are not known. Our main goal was to estimate the most cost-effective monitoring method for sampling carnivore culvert using track-pads and video-surveillance. We estimated the most efficient (lower costs and high detection success) interval between visits (days) when using track-pads and also determined the advantages of using each method. In 2006, we selected two highways in southern Portugal and sampled 15 culverts over two 10-day sampling periods (spring and summer). Using the track-pad method, 90% of the animal tracks were detected using a 2-day interval between visits. We recorded a higher number of crossings for most species using video-surveillance (n = 129) when compared with the track-pad technique (n = 102); however, the detection ability using the video-surveillance method varied with type of structure and species. More crossings were detected in circular culverts (1 m and 1.5 m diameter) than in box culverts (2 m to 4 m width), likely because video cameras had a reduced vision coverage area. On the other hand, carnivore species with small feet such as the common genet Genetta genetta were detected less often using the track-pad surveying method. The cost-benefit analyzes shows that the track-pad technique is the most appropriate technique, but video-surveillance allows year-round surveys as well as the behavior response analyzes of species using crossing structures.     

Occupational accidents model based on risk–injury affinity groups

This article sets outs a generalized utility model for the diagnosis and prediction of accidents among the Spanish workforce. Based on observational data classified into a risk–injury contingency table (19 × 19), we have summarized the accident rate of all Spanish companies over an 11-year period (75,19,732 accidents). By using correspondence analysis a structure composed of three axes can be obtained, the combination of which identifies three separate risk and injury groups, which we use as a general Spanish pattern. The relationships of greater affinity or likelihood amongst the risks and injuries identified in the pattern facilitate decision-making at the risk-assessment stage in Spanish companies. Each risk–injury group has its own characteristics, interpretable within the phenomenological framework of the accident.The main advantage of this model is its potential application to any other country and the feasibility of contrasting results from different countries. One limiting factor, however, is that the model currently lacks a common classification frame for risks and injuries which would enhance this contrast. The aim of this model is to automatically manage work-related accidents at a national level.     

Heart rate variability and motion sickness during forklift simulator driving

The goal of the study was to determine the effect of a 1-h hour long forklift truck virtual simulator driving on the mechanism of autonomic heart rate (HR) regulation in operators. The participants were divided into 2 subgroups: subjects with no definite inclination to motion sickness (group A) and subjects with a definite inclination to motion sickness (group B). Holter monitoring of electrocardiogram (ECG) signal was carried out in all subjects during the virtual simulator driving. For 12 consecutive epochs of ECG signal, HR variability analysis was conducted in time and frequency domains. In subjects with a definite inclination to motion sickness after ~30 min of the driving, changes in parameter values were found indicating an increase in sympathetic and parasympathetic activity with parasympathetic dominance.     

Design and laboratory testing of a new flow-through directional passive air sampler for ambient particulate matter

A new type of directional passive air sampler (DPAS) is described for collecting particulate matter (PM) in ambient air. The prototype sampler has a non-rotating circular sampling tray that is divided into covered angular channels, whose ends are open to winds from sectors covering the surrounding 360°. Wind-blown PM from different directions enters relevant wind-facing channels, and is retained there in collecting pools containing various sampling media. Information on source direction and type can be obtained by examining the distribution of PM between channels. Wind tunnel tests show that external wind velocities are at least halved over an extended area of the collecting pools, encouraging PM to settle from the air stream. Internal and external wind velocities are well-correlated over an external velocity range of 2.0-10.0 m s?1, which suggests it may be possible to relate collected amounts of PM simply to ambient concentrations and wind velocities. Measurements of internal wind velocities in different channels show that velocities decrease from the upwind channel round to the downwind channel, so that the sampler effectively resolves wind directions. Computational fluid dynamics (CFD) analyses were performed on a computer-generated model of the sampler for a range of external wind velocities; the results of these analyses were consistent with those from the wind tunnel. Further wind tunnel tests were undertaken using different artificial particulates in order to assess the collection performance of the sampler in practice. These tests confirmed that the sampler can resolve the directions of sources, by collecting particulates preferentially in source-facing channels.     

Development of a sampling method for the simultaneous monitoring of straight-chain alkanes, straight-chain saturated carbonyl compounds and monoterpenes in remote areas

Studies have shown that biogenic compounds, long chain secondary compounds and long lifetime anthropogenic compounds are involved in the formation of organic aerosols in both polluted areas and remote places. This work aims at developing an active sampling method to monitor these compounds (i.e. 6 straight-chain saturated aldehydes from C6 to C11; 8 straight-chain alkanes from C9 to C16; 6 monoterpenes: α-pinene, β-pinene, camphene, limonene, α-terpinene, & γ-terpinene; and 5 aromatic compounds: toluene, ethylbenzene, meta-, para- and ortho-xylenes) in remote areas. Samples are collected onto multi-bed sorbent cartridges at 200 mL min(-1) flow rate, using the automatic sampler SyPAC (TERA-Environnement, Crolles, France). No breakthrough was observed for sampling volumes up to 120 L (standard mixture at ambient temperature, with a relative humidity of 75%). As ozone has been shown to alter the samples (losses of 90% of aldehydes and up to 95% of terpenes were observed), the addition of a conditioned manganese dioxide (MnO(2)) scrubber to the system has been validated (full recovery of the affected compounds for a standard mixture at 50% relative humidity--RH). Samples are first thermodesorbed and then analysed by GC/FID/MS. This method allows suitable detection limits (from 2 ppt for camphene to 13 ppt for octanal--36 L sampled), and reproducibility (from 1% for toluene to 22% for heptanal). It has been successfully used to determine the diurnal variation of the target compounds (six 3 h samples a day) during winter and summer measurement campaigns at a remote site in the south of France.     

Optical fiber based methodology for assessment of thiocyanate in seawater

A new methodology for the assessment of thiocyanate (SCN(-)) is proposed based on optical fiber (OF) detection coupled to a liquid chromatography system (LC). The developed methodology showed an adequate performance for the analysis of SCN(-) comparable to a high performance liquid chromatography with UV detector (HPLC-UV) methodology: a detection limit of 3 μg L(-1), a linear range from 4 to 400 μg L(-1), and an analytical time of less than 6 min. The OF based methodology was of compact design and easy operation. This simple system has the potential to be used as a sensing approach for SCN(-) in seawater.     

Distribution and availability of trace elements in municipal solid waste composts

Trace element contamination is one of the main problems linked to the quality of compost, especially when it is produced from urban wastes, which can lead to high levels of some potentially toxic elements such as Cu, Pb or Zn. In this work, the distribution and bioavailability of five elements (Cu, Zn, Pb, Cr and Ni) were studied in five Spanish composts obtained from different feedstocks (municipal solid waste, garden trimmings, sewage sludge and mixed manure). The five composts showed high total concentrations of these elements, which in some cases limited their commercialization due to legal imperatives. First, a physical fractionation of the composts was performed, and the five elements were determined in each size fraction. Their availability was assessed by several methods of extraction (water, CaCl(2)-DTPA, the PBET extract, the TCLP extract, and sodium pyrophosphate), and their chemical distribution was assessed using the BCR sequential extraction procedure. The results showed that the finer fractions were enriched with the elements studied, and that Cu, Pb and Zn were the most potentially problematic ones, due to both their high total concentrations and availability. The partition into the BCR fractions was different for each element, but the differences between composts were scarce. Pb was evenly distributed among the four fractions defined in the BCR (soluble, oxidizable, reducible and residual); Cu was mainly found in the oxidizable fraction, linked to organic matter, and Zn was mainly associated to the reducible fraction (iron oxides), while Ni and Cr were mainly present almost exclusively in the residual fraction. It was not possible to establish a univocal relation between trace elements availability and their BCR fractionation. Given the differences existing for the availability and distribution of these elements, which not always were related to their total concentrations, we think that legal limits should consider availability, in order to achieve a more realistic assessment of the risks linked to compost use.     

DNA damage as a biomarker of genotoxic contamination in Mytilus galloprovincialis from the south coast of Portugal

DNA damage was evaluated in the haemolymph of Mytilus galloprovincialis from nine sites along the south coast of Portugal using the comet assay. DNA damage was low, in the same range of sites considered to suffer low impact from genotoxic contaminants. Even so, differences between sites, seasons and genders were found. Highest values were in mussels from the main estuaries and the fishery harbour, reflecting higher genotoxin levels, whereas the lowest values can be used as a baseline for future work. Non-contaminant related factors (e.g. temperature and oxygen) were also shown to influence DNA damage. Between seasons, highest values were in summer related not only to the increase of tourism in this region (～10-fold), but also to temperature. Between genders, males were found to be more sensitive. The condition index was also generally higher in summer. Lipid peroxidation, another damage biomarker, was measured in gills to assess if there is any association between the responses of both biomarkers and if they are similarly affected by the same environmental conditions. LPO like DNA damage was higher in summer. This work confirms that DNA damage is a sensitive biomarker to discriminate genotoxic contamination, even in areas considered to suffer low impact from genotoxins.