Composition changes in the cuticular surface lipids of the helophytes <Emphasis Type="Italic">Phragmites australis</Emphasis> and <Emphasis Type="Italic">Juncus effusus</Emphasis> as result of pollutant exposure

Aim of the study  

Helophytes like rush and reed are increasingly used for phytoremediation of contaminated water. This study characterises the response of rush and reed plants to chemical stressors such as chlorobenzene, benzene and methyl-tert-butyl ether. The extractable wax layer of the cuticle was chosen for detailed investigations due to its multiple, particularly, protective functions for plants and its easy availability for analysis.     

Photocatalytic oxidation of organic pollutants on titania-clay composites

TiO2/Ca-montmorillonite composites were prepared by wet grinding in an agate mill. Positively charged TiO2 nanoparticles are bound to the surface of the negatively charged montmorillonite layers via heterocoagulation; the clay mineral is used as adsorbent and support for the photooxidation process. Aquatic solution of 0.5mM phenol was degraded by irradiation with UV-VIS light (lambda=250-440 and 540-590 nm) in suspensions of TiO2-clay composites and significant photodegradation was observed at 40-60% TiO2/Ca-montmorillonite compositions. Synergistic effect was detected at solid/liquid interface for degradation of phenol and at solid/gas interface in the recycling flow reactors for photooxidation of ethanol and toluene vapors.     

Bioavailable metals and cellular effects in the digestive gland of marine limpets living close to shallow water hydrothermal vents

The pressure exerted by shallow water hydrothermal vents on edible gastropods and their cellular responses triggered by these stresses are almost unknown. The aims of this study were to evaluate the bioavailability of metals in the Macaronesian endemic limpet Patella candei gomesii living close to shallow water hydrothermal vents, and the structural differences in their digestive gland as well as the levels of apoptosis in that organ. Limpets were sampled in four sites, two with the presence of hydrothermalism and the other two without it. Whole body concentrations of several metals (Ca, Cd, Cs, Co, Cu, Fe, Hg, Mg, Mn, Pb, Rb, Se, Sr, and Zn) were obtained, morphometry analysis of the digestive gland and TUNEL test for apoptosis were also performed. Results revealed that the presence of shallow water hydrothermal vents is a source of chronic metal stress to limpets, imposing modifications in the morphometry and cell composition of the digestive gland of those limpets that may constitute cell and tissue adaptations to the environment they live in. This study sets up new baseline data for further research on the influence of shallow water hydrothermal vents over communities living in these habitats.     

Real-world emissions of in-use off-road vehicles in Mexico

Off-road vehicles used in construction and agricultural activities can contribute substantially to emissions of gaseous pollutants and can be a major source of submicrometer carbonaceous particles in many parts of the world. However, there have been relatively few efforts in quantifying the emission factors (EFs) and for estimating the potential emission reduction benefits using emission control technologies for these vehicles. This study characterized the black carbon (BC) component of particulate matter and NOx, CO, and CO₂ EFs of selected diesel-powered off-road mobile sources in Mexico under real-world operating conditions using on-board portable emissions measurements systems (PEMS). The vehicles sampled included two backhoes, one tractor, a crane, an excavator, two front loaders, two bulldozers, an air compressor, and a power generator used in the construction and agricultural activities. For a selected number of these vehicles the emissions were further characterized with wall-flow diesel particle filters (DPFs) and partial-flow DPFs (p-DPFs) installed. Fuel-based EFs presented less variability than time-based emission rates, particularly for the BC. Average baseline EFs in working conditions for BC, NOx, and CO ranged from 0.04 to 5.7, from 12.6 to 81.8, and from 7.9 to 285.7 g/kg-fuel, respectively, and a high dependency by operation mode and by vehicle type was observed. Measurement-base frequency distributions of EFs by operation mode are proposed as an alternative method for characterizing the variability of off-road vehicles emissions under real-world conditions. Mass-based reductions for black carbon EFs were substantially large (above 99%) when DPFs were installed and the vehicles were idling, and the reductions were moderate (in the 20–60% range) for p-DPFs in working operating conditions. The observed high variability in measured EFs also indicates the need for detailed vehicle operation data for accurately estimating emissions from off-road vehicles in emissions inventories.

Implications: Measurements of off-road vehicles used in construction and agricultural activities in Mexico using on-board portable emissions measurements systems (PEMS) showed that these vehicles can be major sources of black carbon and NO_X. Emission factors varied significantly under real-world operating conditions, suggesting the need for detailed vehicle operation data for accurately estimating emissions inventories. Tests conducted in a selected number of sampled vehicles indicated that diesel particle filters (DPFs) are an effective technology for control of diesel particulate emissions and can provide potentially large emissions reduction in Mexico if widely implemented.     

Removal of Hydrocarbons from Wastewater Using Treated Bark

ABSTRACT

This paper explores the possibility of removing hydrocarbons (HCs) and trace elements from synthetic and industrial effluents using treated bark as biosorbent. Coniferous bark was treated either chemically (Tc) or biologically (Tb) to eliminate soluble organic compounds of bark. The removal efficiency (RE) of the HCs from a synthetic oil-water mixture containing spent diesel motor oil exceeds 95% using 2 g/L of treated bark mixed with a synthetic oil-water mixture containing 2 g/L of spent oil. Under these conditions, the retention capacity (RC) was ~1 g HC/g dry substrate. The sorption reaction seems to be quasi-instantaneous, and the retention capacity of spent oil on treated bark increases as the temperature augments. This implies that the retention mechanism is related to the capillary action.

Results of Fourier transform infrared (FTIR) spectros-copy indicate that spent oil is mainly composed of al-kanes. They also suggest that no chemical bonds between

Tc and spent oil were established. Measurement of the surface tension of spent oil and the wetting index of the bark suggests that only spent oil will be retained by the substrate. Treatment of an industrial effluent containing 14.4 g/L of total HCs was performed using Tc. It was possible to remove 97% of HCs and retain some trace elements such as Al, Ca, Fe, Mg, S, and so on.     

Aquatic environments polluted with antibiotics and heavy metals: a human health hazard

Aquatic environments often receive wastewater containing pollutants such as antibiotics and heavy metals from hospital sewage, as well as contaminants from soil. The presence of these pollutants can increase the rate of exchange of resistant genes between environmental and pathogenic bacteria, which can make the treatment of various types of bacterial infections in humans and animals difficult, in addition to causing environmental problems such as ecological risk. In this study, two tetracycline-resistant Pseudomonas aeruginosa (EW32 and EW33), isolated from aquatic environments close to industries and a hospital in southeastern Brazil, were investigated regarding the possible association between tetracycline and heavy metal resistance. The isolate EW32 presented a conjugative plasmid with coresistance to tetracycline and copper, reinforcing the concern that antibiotic resistance by acquisition of plasmids can be induced by the selective pressure of heavy metals in the environment.     

Newborns and low to moderate prenatal environmental lead exposure: might fathers be the key?

This study is part of the BioMadrid Project, a bio-monitoring study designed to assess pollutants in the environment surrounding children born in the Madrid region. Our aim in this report is to evaluate the association between prenatal lead exposure and fetal development using three biological samples (maternal and paternal blood lead at around 34 weeks of gestation as well as cord blood lead levels), three biomarkers of effect in cord blood peripheral lymphocytes (micronucleus in binucleated cells, nucleoplasmic bridges, and nuclear buds), and different anthropometrical characteristics at birth. Maternal and cord blood lead were not associated with newborn measurements or genotoxicity biomarkers. In contrast, increases in father blood lead were coupled with lower weight (mean difference (MD), ?110.8 g; 95 % confidence intervals (95%CI), ?235.6 to 6.00; p?<?0.10) and shorter abdominal (MD, ?0.81 cm; 95%CI, ?1.64 to 0.00; p?<?0.05) and cephalic (MD, ?0.32 cm; 95%CI, ?0.65 to 0.00; p?<?0.05) circumferences at birth as well as with the presence of nucleoplasmic bridges (odds ratio, 1.03; 95%CI, 1.00 to 1.06; p?<?0.05) and nuclear buds (odds ratio, 1.02; 95%CI, 0.99 to 1.04; p?<?0.10). These associations were mainly confined to female babies, in whom paternal lead was also inversely associated with length. Our results support the hypothesis that paternal lead exposure may be affecting the development of newborns.     

Improvement of health risk factors after reduction of VOC concentrations in industrial and urban areas

After reductions of fugitive and diffuse emissions by an industrial complex, a follow-up study was performed to determine the time variability of volatile organic compounds (VOCs) and the lifetime cancer risk (LCR). Passive samplers (3 M monitors) were placed outdoors (n?=?179) and indoors (n?=?75) in industrial, urban, and control areas for 4 weeks. Twenty-five compounds including n-alkanes, cycloalkanes, aromatics, chlorinated hydrocarbons, and terpenes were determined by GC/MS. The results show a significant decrease of all VOCs, especially in the industrial area and to a lesser extent in the urban area. The median outdoor concentration of benzene in the industrial area declined compared to the former study, around 85 % and about 50 % in the urban area, which in the past was strongly influenced by industrial emissions. Other carcinogenic compounds like styrene and tetrachloroethylene were reduced to approximately 60 %. VOC concentrations in control areas remained nearly unchanged. According to the determined BTEX ratios and interspecies correlations, in contrast to the previous study, traffic was identified as the main emission source in the urban and control areas and showed an increased influence in the industrial area. The LCR, calculated for benzene, styrene, and tetrachloroethylene, shows a decrease of one order of magnitude in accordance to the decreased total VOC concentrations and is now acceptable according to values proposed by the World Health Organization.     

Effectiveness evaluation of glyphosate oxidation employing the H2O2/UVC process: Toxicity assays with Vibrio fischeri and Rhinella arenarum tadpoles

The H₂O₂/UVC process was applied to the photodegradation of a commercial formulation of glyphosate in water. Two organisms (Vibrio fischeri bacteria and Rhinella arenarum tadpoles) were used to investigate the toxicity of glyphosate in samples M_1, M₂, and M₃ following different photodegradation reaction times (120, 240 and 360 min, respectively) that had differing amounts of residual H₂O₂. Subsamples of M₁, M₂, and M₃ were then used to create samples M_1,E, M_2,E and M_3,E in which the H₂O₂ had been removed. Acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) activities were measured in tadpoles to determine possible sub-lethal effects. In V. fischeri, M_1,E, which was collected early in the photodegradation process, caused 52% inhibition, while M_3,E, which was collected at the end of the photodegradation process, caused only 17% inhibition. Survival of tadpoles was 100% in samples M₂, M₃, and in M_1,E, M_2,E and M_3,E. The lowest percentages of enzymatic inhibition were observed in samples without removal of H₂O₂: 13.96% (AChE) and 16% (BChE) for M₂, and 24.12% (AChE) and 13.83% (BChE) for M₃. These results show the efficiency of the H₂O₂/UVC process in reducing the toxicity of water or wastewater polluted by commercial formulations of glyphosate. According to the ecotoxicity assays, the conditions corresponding to M₂ (11 ± 1 mg a.e. L^?1 glyphosate and 11 ± 1 mg L^?1 H₂O₂) could be used as a final point for glyphosate treatment with the H₂O₂/UV process.     

Water quality modelling of Lis River, Portugal

The aim of the study was to predict the impact of flow conditions, discharges and tributaries on the water quality of Lis River using QUAL2Kw model. Calibration of the model was performed, based on data obtained in field surveys carried out in July 2004 and November 2006. Generally the model fitted quite well the experimental data. The results indicated a decrease of water quality in the downstream area of Lis River, after the confluence of Lena, Milagres and Amor tributaries, as a result of discharges of wastewaters containing degradable organics, nutrients and pathogenic organisms from cattle-raising wastewaters, domestic effluents and agricultural runoff. The water quality criteria were exceeded in these areas for dissolved oxygen, biochemical oxygen demand, total nitrogen and faecal coliforms. Water quality modelling in different scenarios showed that the impact of tributaries on the quality of Lis River water was quite negligible and mainly depends on discharges, which are responsible by an increase of almost 45, 13 and 44 % of ultimate carbonaceous biochemical oxygen demand (CBOD_u), ammonium nitrogen and faecal coliforms, for winter simulation, and 23, 33 and 36 % for summer simulation, respectively, when compared to the real case scenario.