The influence of humic acids on the phytoextraction of cadmium from soil

Cadmium poses a major environmental and human health threat because of its constant release through anthropogenic activities. A need, therefore, exists for cost-effective remediation procedures. Phytoremediation, the use of plants to extract contaminants from soils and groundwater, has revealed great potential. However, it is limited by the fact that plants need time, nutrient supply and, moreover, have a limited metal uptake capacity. Synthetic chelators have shown positive effects in enhancing heavy metal extraction through phytoremediation, but they have also revealed a vast number of negative side-effects. The objective of this research was to investigate the use of humic acids as an alternative to synthetic chelators. Humic acids were applied to a cadmium-contaminated soil at various dosages, and the uptake of cadmium into Nicotiana tabacum SR-1 was determined in relation to the amounts of total and bioavailable cadmium in the soil. It was found that the theoretical bioavailability of cadmium, as determined by diethylenetriaminepentaacetic acid (DTPA) extraction, did not change, but its plant uptake was enhanced significantly, in some cases up to 65%. Humic acids added at a rate of 2 g kg(-1) soil increased the cadmium concentration in the shoots from 30.9 to 39.9 mg kg(-1). A possible reason for this enhancement is the decrease in pH, resulting in higher cadmium availability. Another possibility taken into account is that plants may take up cadmium complexes with humic acid fragments, which result from microbiological degradation or, self-dissociation.     

Gestaltungsoptionen für handlungsf?hige Innovationssysteme zur erfolgreichen Substitution gef?hrlicher Stoffe (SubChem)

Ohne Zusammenfassung Online First: 27. 03. 2002 ‚Sustainable Substitution of Hazardous Substances‚; Projektbeschreibung unter wwwoekopolde oder wwwfh-hamburgdelpers/gleich_von bzw. www.uni-hamburgde/kooperationssteI1e-hh. Das Vorhaben wird vom Bundesministerium für Bildung und Forschung (BMBF) im F?rderschwerpunkt ‚Rahmenbedingungen für Innovationen zum nachhaitigen Wirtschaften’ (RIW) gef?rdert und von der GSF als Projekttr?ger betreut (FkZ. O7Riw4).     

Solute transport in crystalline rocks at Aspö--I: geological basis and model calibration

Water-conducting faults and fractures were studied in the granite-hosted Asp? Hard Rock Laboratory (SE Sweden). On a scale of decametres and larger, steeply dipping faults dominate and contain a variety of different fault rocks (mylonites, cataclasites, fault gouges). On a smaller scale, somewhat less regular fracture patterns were found. Conceptual models of the fault and fracture geometries and of the properties of rock types adjacent to fractures were derived and used as input for the modelling of in situ dipole tracer tests that were conducted in the framework of the Tracer Retention Understanding Experiment (TRUE-1) on a scale of metres. After the identification of all relevant transport and retardation processes, blind predictions of the breakthroughs of conservative to moderately sorbing tracers were calculated and then compared with the experimental data. This paper provides the geological basis and model calibration, while the predictive and inverse modelling work is the topic of the companion paper [J. Contam. Hydrol. 61 (2003) 175]. The TRUE-1 experimental volume is highly fractured and contains the same types of fault rocks and alterations as on the decametric scale. The experimental flow field was modelled on the basis of a 2D-streamtube formalism with an underlying homogeneous and isotropic transmissivity field. Tracer transport was modelled using the dual porosity medium approach, which is linked to the flow model by the flow porosity. Given the substantial pumping rates in the extraction borehole, the transport domain has a maximum width of a few centimetres only. It is concluded that both the uncertainty with regard to the length of individual fractures and the detailed geometry of the network along the flowpath between injection and extraction boreholes are not critical because flow is largely one-dimensional, whether through a single fracture or a network. Process identification and model calibration were based on a single uranine breakthrough (test PDT3), which clearly showed that matrix diffusion had to be included in the model even over the short experimental time scales, evidenced by a characteristic shape of the trailing edge of the breakthrough curve. Using the geological information and therefore considering limited matrix diffusion into a thin fault gouge horizon resulted in a good fit to the experiment. On the other hand, fresh granite was found not to interact noticeably with the tracers over the time scales of the experiments. While fracture-filling gouge materials are very efficient in retarding tracers over short periods of time (hours-days), their volume is very small and, with time progressing, retardation will be dominated by altered wall rock and, finally, by fresh granite. In such rocks, both porosity (and therefore the effective diffusion coefficient) and sorption K(d)s are more than one order of magnitude smaller compared to fault gouge, thus indicating that long-term retardation is expected to occur but to be less pronounced.     

Ozone pollution and ozone biomonitoring in European cities. Part I: Ozone concentrations and cumulative exposure indices at urban and suburban sites

In the frame of a European research project on air quality in urban agglomerations, data on ozone concentrations from 23 automated urban and suburban monitoring stations in 11 cities from seven countries were analysed and evaluated. Daily and summer mean and maximum concentrations were computed based on hourly mean values, and cumulative ozone exposure indices (Accumulated exposure Over a Threshold of 40 ppb (AOT40), AOT20) were calculated. The diurnal profiles showed a characteristic pattern in most city centres, with minimum values in the early morning hours, a strong rise during the morning, peak concentrations in the afternoon, and a decline during the night. The widest amplitudes between minimum and maximum values were found in central and southern European cities such as Düsseldorf, Verona, Klagenfurt, Lyon or Barcelona. In the northern European cities of Edinburgh and Copenhagen, by contrast, maximum values were lower and diurnal variation was much smaller. Based on ozone concentrations as well as on cumulative exposure indices, a clear north–south gradient in ozone pollution, with increasing levels from northern and northwestern sites to central and southern European sites, was observed. Only the Spanish cities did not fit this pattern; there, ozone levels were again lower than in central European cities, probably due to the direct influence of strong car traffic emissions. In general, ozone concentrations and cumulative exposure were significantly higher at suburban sites than at urban and traffic-exposed sites. When applying the newly established European Union (EU) Directive on ozone pollution in ambient air, it was demonstrated that the target value for the protection of human health was regularly surpassed at urban as well as suburban sites, particularly in cities in Austria, France, northern Italy and southern Germany. European target values and long-term objectives for the protection of vegetation expressed as AOT40 were also exceeded at many monitoring sites.     

Increasing the microbial activity in activated sludge by the phenomenon of 'biological resonance

Mechanical oscillations as well as electrical oscillations (e.g. in an electrical oscillatory circuit) can lead to resonance conditions by external agitation with the natural frequency of the system. During the microbial protein synthesis, the induction and repression mechanisms also cause oscillations in the form of varying protein concentrations. The aim of this work concentrates on an induced resonance case of the biological system, comparable with physical resonance phenomena, by external periodic stimulations. For this, system theoretical computer simulations with a structured genetic model were carried out, which built the theoretical fundament for describing the effect of 'Biological Resonance'. Based on that, lab-scale experiments using a mixed microbial culture (activated sludge) and skimmed milk as an inducing substrate revealed an enhanced microbial productivity of around 60%-75% compared to values of the productivity under steady-state conditions in a narrow range of process parameters. The optimum (resonance case) was confirmed by a repetition of the variation experiments and is characterised by a substrate supply period of approx. 18 min and a following starvation period of about 9 min. Long-term investigations under optimised process conditions indicate adaptation mechanisms of the microorganisms to evade the imposed stress conditions. The productivity will not remain constant without additional stimulation and declines to its original level. However, temporal modulation of the starvation period permanently increases the productivity (elevated catabolism) to about 60%, which was observed over a period of several weeks.     

PIXE trace element analysis of an aquatic plant as indicator of heavy metal pollution

A new way of detecting trace elements in water is developed by using charged $\text{P}$article $\text{I}$nduced $\text{X}$-ray $\text{E}$mission (PIXE) analysis of cell walls of $\text{Chara corallina}$, a fresh water alga.     

Die Wirkung des Isonikotinsäurehydrazids auf die Zellmorphologie von Mykobakterien

The Science of Nature -     

Future ocean acidification will be amplified by hypoxia in coastal habitats

Ocean acidification is elicited by anthropogenic carbon dioxide emissions and resulting oceanic uptake of excess CO₂ and might constitute an abiotic stressor powerful enough to alter marine ecosystem structures. For surface waters in gas-exchange equilibrium with the atmosphere, models suggest increases in CO₂ partial pressure (pCO₂) from current values of ca. 390 μatm to ca. 700–1,000 μatm by the end of the century. However, in typically unequilibrated coastal hypoxic regions, much higher pCO₂ values can be expected, as heterotrophic degradation of organic material is necessarily related to the production of CO₂ (i.e., dissolved inorganic carbon). Here, we provide data and estimates that, even under current conditions, maximum pCO₂ values of 1,700–3,200 μatm can easily be reached when all oxygen is consumed at salinities between 35 and 20, respectively. Due to the nonlinear nature of the carbonate system, the approximate doubling of seawater pCO₂ in surface waters due to ocean acidification will most strongly affect coastal hypoxic zones as pCO₂ during hypoxia will increase proportionally: we calculate maximum pCO₂ values of ca. 4,500 μatm at a salinity of 20 (T = 10 °C) and ca. 3,400 μatm at a salinity of 35 (T = 10 °C) when all oxygen is consumed. Upwelling processes can bring these CO₂-enriched waters in contact with shallow water ecosystems and may then affect species performance there as well. We conclude that (1) combined stressor experiments (pCO₂ and pO₂) are largely missing at the moment and that (2) coastal ocean acidification experimental designs need to be closely adjusted to carbonate system variability within the specific habitat. In general, the worldwide spread of coastal hypoxic zones also simultaneously is a spread of CO₂-enriched zones. The magnitude of expected changes in pCO₂ in these regions indicates that coastal systems may be more endangered by future global climate change than previously thought.     

Limits of Concern: suggestions for the operationalisation of a concept to determine the relevance of adverse effects in the ERA of GMOs

Background

The European Food Safety Authority proposed a concept for the environmental risk assessment of genetically modified plants in the EU that is based on the definition of thresholds for the acceptability of potential adverse effects on the environment. This concept, called Limits of Concern (LoC), needs to be further refined to be implemented in the environmental risk assessment of genetically modified organisms.

Methods

We analyse and discuss how LoC can be defined for the environmental risk assessment for three different types of genetically modified plants. We outline protection goals relevant to the genetically modified plants in question and discuss existing concepts and suggestions for acceptability thresholds from the environmental risk assessment of different regulatory areas. We make specific recommendations for the setting and use of LoC for each type of genetically modified plant.

Results

The LoC concept can be suitably applied for the environmental risk assessment of genetically modified organisms, if the different protection goals in agro-environments are specifically considered. Not only biodiversity protection goals but also agricultural protection goals need to be addressed. The different ecosystem services provided by weeds inside and outside agricultural fields have to be considered for genetically modified herbicide-tolerant crops. Exposure-based LoCs are suggested based on knowledge about dose–effect relationships between maize pollen and non-target Lepidoptera for insect-resistant maize. Due to the long-term nature of biological processes such as spread and establishment, LoCs for genetically modified oilseed rape should be defined for the presence of the genetically modified plant or its genetically modified traits in relevant protection goals.

Conclusions

When setting LoCs, the focus should be on protection goals which are possibly affected. Potential overlaps of the LoC concept with the ecosystem service concept have to be clarified to harmonise protection levels in the agro-environment for different stressors. If additional impacts on agro-biodiversity resulting from the cultivation of genetically modified plants are to be avoided, then high protection levels and low thresholds for acceptable effects (i.e. LoC) should be set.