Solute transport in crystalline rocks at Äspö — I: Geological basis and model calibration

Water-conducting faults and fractures were studied in the granite-hosted Äspö Hard Rock Laboratory (SE Sweden). On a scale of decametres and larger, steeply dipping faults dominate and contain a variety of different fault rocks (mylonites, cataclasites, fault gouges). On a smaller scale, somewhat less regular fracture patterns were found. Conceptual models of the fault and fracture geometries and of the properties of rock types adjacent to fractures were derived and used as input for the modelling of in situ dipole tracer tests that were conducted in the framework of the Tracer Retention Understanding Experiment (TRUE-1) on a scale of metres. After the identification of all relevant transport and retardation processes, blind predictions of the breakthroughs of conservative to moderately sorbing tracers were calculated and then compared with the experimental data. This paper provides the geological basis and model calibration, while the predictive and inverse modelling work is the topic of the companion paper [J. Contam. Hydrol. 61 (2003) 175].The TRUE-1 experimental volume is highly fractured and contains the same types of fault rocks and alterations as on the decametric scale. The experimental flow field was modelled on the basis of a 2D-streamtube formalism with an underlying homogeneous and isotropic transmissivity field. Tracer transport was modelled using the dual porosity medium approach, which is linked to the flow model by the flow porosity. Given the substantial pumping rates in the extraction borehole, the transport domain has a maximum width of a few centimetres only. It is concluded that both the uncertainty with regard to the length of individual fractures and the detailed geometry of the network along the flowpath between injection and extraction boreholes are not critical because flow is largely one-dimensional, whether through a single fracture or a network. Process identification and model calibration were based on a single uranine breakthrough (test PDT3), which clearly showed that matrix diffusion had to be included in the model even over the short experimental time scales, evidenced by a characteristic shape of the trailing edge of the breakthrough curve. Using the geological information and therefore considering limited matrix diffusion into a thin fault gouge horizon resulted in a good fit to the experiment. On the other hand, fresh granite was found not to interact noticeably with the tracers over the time scales of the experiments.While fracture-filling gouge materials are very efficient in retarding tracers over short periods of time (hours–days), their volume is very small and, with time progressing, retardation will be dominated by altered wall rock and, finally, by fresh granite. In such rocks, both porosity (and therefore the effective diffusion coefficient) and sorption K_ds are more than one order of magnitude smaller compared to fault gouge, thus indicating that long-term retardation is expected to occur but to be less pronounced.     

In vivo measurements of the internal pH of Hediste (Nereis) diversicolor (Annelida, Polychaeta) exposed to ambient sulphidic conditions using pH microelectrodes

 The effect of different ambient sulphide concentrations on the internal pH regime of Hediste (Nereis) diversicolor was studied under in vivo conditions using liquid membrane pH microelectrodes, a method which is new to marine sciences. As a case study, the hypothesis was tested whether organisms exposed to ambient sulphidic conditions are able to lower their internal pH which, in effect, would reduce sulphide influx into the animals and thus could represent an effective detoxification mechanism. It was shown that a significant lowering of the internal pH occurred within only 20 min after adding sulphide. This pH lowering appeared to be dependent on the external sulphide concentration of the ambient medium and showed a saturation beyond a threshold level of about 130 μM. It is discussed whether this sulphide-induced pH drop is an active regulatory mechanism and acts as an effective protection mechanism against sulphide during short-term exposures. Received: 1 June 1999 / Accepted in revised form: 3 May 2000     

Transfer von PCDD/F und anderen organischen Umweltchemikalien im System Boden-Pflanze-Luft I. Modellierung des Transferverhaltens

Die Massenbilanz von PCDD/F—insbesondere von 2,3,7,8-TCDD—im System Boden-Pflanze-Luft wird mit einem einfachen konzeptuellen Modell berechnet. Die wichtigsten Ergebnisse sind:

Simultaneous Measurements of Atmospheric Pollutants and Visibility with a Long-Path DOAS System in Urban Areas

In this paper, the applicability of a Long-Path Differential Optical Absorption Spectroscopy (LP-DOAS) system was checked for the feasibility of the simultaneous measurement of trace gases (such as O₃, NO₂, SO₂, and HCHO) and atmospheric visibility (light extinction by aerosols) in Asian urban areas. Field studies show that an LP-DOAS system can simultaneously measure the key pollutants (such as O₃, NO₂, SO₂, and HCHO) at detection limits in the ppb/sub-ppb range as well as the Mie extinction coefficient with an uncertainty of 0.1 km^–1 at time resolution of a few minutes. It is thus concluded that the use of LP-DOAS system is feasible for simultaneous measurement of gaseous pollutants as well as an atmospheric extinction coefficient which is tightly bound to fine particulate concentration.     

Establishing minimum water level for Plastiras reservoir (Greece) combining water quality modelling with landscape aesthetics

A water quality model (MERES) is applied in the multi-purpose reservoir of Plastiras in Greece. The model was calibrated with limited field data using the standard trial and error procedure; next, it was applied for four scenarios of reservoir operation, which correspond to four values of minimum water levels (MWL). Model results were combined with landscape aesthetics to establish a “safe” MWL in the reservoir. MWL was proposed to be +784 m, a value that ensures a very good water quality by retaining the reservoir in the status of “a little beyond oligotrophic” and a very good quality of landscape with an acceptable area of dead zones; it also ensures an annual release of 127.5 hm³ of water within a reliability level of 90%. This quantity can be considered as acceptable from the water supply point of view.     

A passive sampling method to determine ammonia in ambient air

Ambient ammonia concentrations, mainly originating from agricultural activities, have increased in the last few decades in Europe. As a consequence, critical loads on oligotrophic ecosystems such as forests and mires are greatly exceeded. Monitoring of ambient ammonia concentrations is necessary in order to investigate source-receptor relationships. Measuring ambient ammonia concentrations continuously with high time resolution is very expensive and cost-efficient systems are required. Where time resolution is of minor importance, several cost-effective systems, mainly dry denuder and passive samplers, can be applied. In this paper the Zürcher passive sampler, a diffusive sampling system, is presented. It is a Palmes type sampler with an acidic solution as absorbent and is easy to handle. It was tested at 46 sites in Switzerland over one year. The average concentration in ambient air was 2.5 microg m(-3) +/- 0.4 microg m(-3). The average of the blank values were 0.21 microg m(-3). The detection limit (double the standard deviation of the blank values) was 0.36 microg m(-3). Three passive samplers were exposed at each site and each period. The mean standard deviation of these triplicate measurements was 9.5%. Compared with a discontinuous tubular denuder system and a continuous annular denuder system, the deviation was less than 10%. The Zürcher passive sampler is a useful and cost-efficient tool to determine long-term average ammonia concentrations (one- to four-week periods) in ambient air for mean concentrations above 1 microg m(-3).     

Could energy equilibrium and greenhouse gas emissions in agroecosystems play a key role in crop replacement? A case study in orange and kiwi orchards

Environmental Science and Pollution Research - The development of agriculture is linked to energy resources. Consequently, energy analysis in agroecosystems could be a useful tool for monitoring...     

Butterfly community shifts over two centuries

Environmental changes strongly impact the distribution of species and subsequently the composition of species assemblages. Although most community ecology studies represent temporal snap shots, long‐term observations are rather rare. However, only such time series allow the identification of species composition shifts over several decades or even centuries. We analyzed changes in the species composition of a southeastern German butterfly and burnet moth community over nearly 2 centuries (1840–2013). We classified all species observed over this period according to their ecological tolerance, thereby assessing their degree of habitat specialisation. This classification was based on traits of the butterfly and burnet moth species and on their larval host plants. We collected data on temperature and precipitation for our study area over the same period. The number of species declined substantially from 1840 (117 species) to 2013 (71 species). The proportion of habitat specialists decreased, and most of these are currently endangered. In contrast, the proportion of habitat generalists increased. Species with restricted dispersal behavior and species in need of areas poor in soil nutrients had severe losses. Furthermore, our data indicated a decrease in species composition similarity between different decades over time. These data on species composition changes and the general trends of modifications may reflect effects from climate change and atmospheric nitrogen loads, as indicated by the ecological characteristics of host plant species and local changes in habitat configuration with increasing fragmentation. Our observation of major declines over time of currently threatened and protected species shows the importance of efficient conservation strategies.     

Evaluation of food industry by-products as feed in semi-arid dairy farming systems: the case of Jordan

Dairy feeding systems in many semi-arid countries are based on imported concentrates and forages. This has economic and ecological implications given the increase in global feed prices and greenhouse gas (GHG) emissions from land use change. This paper aims to explore alternative dairy feeding systems under semi-arid conditions, using Jordan as an example. The feedings systems under investigation vary in their share of food industry by-products (replacing concentrates in the diet) and are compared against the current concentrate-based feeding systems. The systems are evaluated against three criteria: their nutritional value, their impact on the cost of milk production, and their GHG mitigation potential. Feed samples from eleven food industry by-products and ten conventional feeds were collected from food factories and from three typical dairy farms, representing the typical large-, medium- and small-scale farm types, respectively. Feed samples were analysed for their chemical composition and metabolisable energy contents. In addition, economic and production farm data were collected and entered into a model for GHGs calculation and economic evaluation. The results suggest that inclusion of locally available food industry by-products in the rations of milk cows in semi-arid production systems can be instrumental in reducing production costs and mitigating GHG emissions. Cost of milk production in the model farms can be lowered by up to 14 %; mitigation of CO₂ eq. emission ranged between 70 and 290 g CO₂ eq./kg milk. The degree to which these benefits can be reaped is positively related to the level of inclusion of by-product feeds in lactating cows’ diets.     

A new post-Kyoto climate regime based on per-capita cumulative CO<Subscript>2</Subscript>-emission rights—rationale,architecture and quantitative assessment of the implication for the CO<Subscript>2</Subscript>-emissions from China,India and the Annex-I countries by 2050

Climate change is one of the most severe global problems in the 21st century. Main drivers are the combustion of fossil fuels, the emissions of industrial gases, emissions from agricultural sites and animal husbandry as well as deforestation. A new cooperative climate regime is necessary to meet the World’s energy and environmental problems against the background of China’s and India’s energy consumption growth. For the second commitment period of the Kyoto Protocol after 2012, a successor regime has to be agreed on. The current approaches, however, have a common weakness. They at the same time (a) do not acknowledge the historical responsibilities of the industrialized countries for the historical greenhouse gas emissions and the responsibility of developing countries for a large fraction of the current future emissions, and (b) do not provide for a fair distribution of emission rights. Against this background, this article aims at forecasting China’s and India's CO₂-emissions up to 2050 and developing a new suggestion for a post Kyoto climate regime based on a cumulated per capita CO₂-emission rights taking the weaknesses of the currently discussed post Kyoto approaches into account.