Concepts for sediment restoration on the palos verdes shelf,California

This article summarizes a study conducted by the U.S. Army Engineer Waterways Experiment Station to develop technical information and to evaluate the engineering feasibility of restoration alternatives for DDT-and PCB-contaminated sediments on the Palos Verdes shelf and slope near Los Angeles, California. The study evaluated the nonremoval alternative of in-place capping of contaminated sediments on the shelf and slope; removal of contaminated sediments using conventional and specialized dredging equipment and deep ocean mining equipment; treatment of contaminated sediments; and disposal of contaminated sediments in confined (diked) disposal facilities (CDFs), contained aquatic disposal (CAD) sites, upland landfills, and deep ocean basin sites. Cost estimates of the various alternatives were also prepared. This article concludes that restoration of the contaminated sediments is technically feasible. Sediments on the shelf and slope can be removed using available dredging technologies for deep water environments. In-place capping, CAD, and CDF alternatives are technically feasible. The deep ocean basin disposal alternative is not feasible from the technical or regulatory standpoint. The treatment alternative is not feasible from the implementability and economic standpoint.     

Book reviews

Earth Politics. Ernst Ulrich von Weizsacker, 1994, London, Zed Books, 234 pp. ISBN 1 85649 174 9, pb £14.95; hb £36.95

Greening Your Local Authority. Janice Morphet (Ed.), 1994, London, Pitman Publishing (originally Harlow, Longman), 144 pp. ISBN 0582 229 065, pb £32.50

Ecology and Society: an introduction. Luke Martell, 1994 London, Polity Press, 250 pp. ISBN 0 7456 1022 6, hb £39.50, ISBN 0 7456 1023 4, pb £11.95

The Politics of the Environment. Robert E. Goodin, 1994. Cheltenham, Edward Elgar, 599 pp. ISBN 1 85278 872 0, hb £115.00

Introduction to Environmental Impact Assessment John Glasson, Riki Therivel & Andrew Chadwick, 1994, London, UCL Press, 352 pp. ISBN 1 85728 117 9, hb £45.00, ISBN 1 85728 118 7, pb £14.95

Planning for the Planet: sustainable development strategies for local and strategic plans. Friends of the Earth, 1994, London, FoE, 104 pp. ISBN 1 85750 224 8, £12.00

Environmental Strategy and Sustainable Development: the corporate challenge for the 21st century. Richard Welford, 1995, London, Routledge, 240 pp. ISBN 0 415 10551 X, hb £40.00, ISBN 0 415 10552 8, pb £12.99

Housing and the Environment: a new agenda. Mark Bhatti, Jane Brooke & Mike Gibson (Eds), 1994, Foreword by Jonathon Porritt, Coventry, Chartered Institute of Housing, 210 pp. ISBN 0 901 607 738, £14.95     

A framework to assess regional environmental impacts of dedicated energy crop production

Numerous studies have evaluated air quality and greenhouse gas mitigation benefits of biomass energy systems, but the potential environmental impacts associated with large-scale changes in land-use patterns needed to produce energy crops have not been quantified. This paper presents a framework to assess the potential soil, water, and biodiversity impacts that may result from the large-scale production of dedicated energy crops. The framework incorporates producer economic decision models with environmental models to assess changes in land use patterns and to quantify the consequent environmental impacts. Economic and policy issues that will affect decisions to produce energy crops are discussed. The framework is used to evaluate erosion and chemical runoff in two Tennessee regions. The analysis shows that production of dedicated energy crops in place of conventional crops will significantly reduce erosion and chemical runoff.     

HEAVY RAINFALL DISTRIBUTIONS BY SEASON IN LOUISIANA: SYNOPTIC INTERPRETATIONS AND QUANTILE ESTIMATES1

ABSTRACT: In most studies, quantile estimates of extreme 24-hour rainfall are given in annual probabilities. The probability of experiencing an excessive storm event, however, differs throughout the year. As a result, this paper explored the differences between heavy rainfall distributions by season in Louisiana. It was concluded by using the Kruskal-Wallis and Mann-Whitney tests that the distribution of heavy rainfall events differs significantly between particular seasons at the sites near the Gulf Coast. Furthermore, seasonal frequency curves varied dramatically at the four sites examined. Mixed distributions within these data were not found to be problematic, but the mechanisms that produced the events were found to change seasonally. Extreme heavy rainfall events in winter and spring were primarily generated by frontal weather systems, while summer and fall events had high proportions of events produced by tropical disturbances and airmass (free-convective) conditions.     

MODELING THE BUILDUP AND WASHOFF OF POLLUTANTS ON URBAN WATERSHEDS1

ABSTRACT: A model for urban stormwater quality was developed in this study. The basis for the model is the process by which pollutants build up on the watershed surface. For the wet climate of the study site, it was assumed that there exists an interval of time over which the pollutant buildup equals the pollutant washoff (no accumulation of pollutant). The buildup model was represented by a linear function of the antecedent dry time. The buildup function was then linked with a pollutant washoff model represented by a power function of the storm runoff volume. Various time intervals for no net accumulation were tested to calibrate the model. The model was calibrated to observed data for two small urban basins in Baton Rouge, Louisiana, and model results were used to analyze the behavior of phosphorus concentrations in storm runoff from these basins over a long period of time.     

Emerging technologies for in-situ groundwater remediation

There are numerous technologies currently being tested by EPA, universities throughout the world, and private research organizations. A few of the more promising innovative technologies as well as fully tested and proven remedies for treating contaminated groundwater are presented in this article. Although several of those technologies have been in existence for only four to five years, the results of full-scale testing are being produced. The method for each of these promising technologies is described, results from recent field-scale studies are summarized, and a discussion of cost is presented.     

Origin of Metazoa: Sponges as Living Fossils

Geodia cydonium  , which code for proteins. The analyses of their deduced amino acid sequences allowed a molecular biological approach to solve the problem of monophyly of Metazoa. Molecules of the extracellular matrix/basal lamina, with the integrin receptor, fibronectin, and galectin as prominent examples, cell-surface receptors (tyrosine kinase receptor), elements of sensory systems (crystallin, metabotropic glutamate receptor), and homologs/modules of an immune system (immunoglobulin like molecules, scavenger receptor cysteine-rich, and short consensus repeats, rhesus system) classify the Porifera as true Metazoa. As living fossils, provided with simple, primordial molecules allowing cell-cell and cell-matrix adhesion as well as processes of signal transduction as known in a more complex manner from higher Metazoa, they also show peculiarities not known in other metazoan phyla. Tissues of sponges are rich in telomerase activity, suggesting a high plasticity in the determination of cell lineages. It is concluded that molecular biological studies with sponges as model will not only help to understand the evolution of Protoctista to Metazoa but also the complex, hierarchial regulatory network of cells in higher Metazoa.     

Considerations for Manufacturing Bio-Based Plastic Products

One engine that drives the United States’ economic growth is an ever-increasing demand for manufactured products, both at home and abroad. This increase has created a major concern for the environment in terms of disposing used goods and ensuring that these products are safe. As environmental concerns grow, however, renewable resources are gaining increasing attention, especially as industrial ecology and product biodegradability gain importance. Added to this, biological materials are increasingly being utilized to replace traditional materials in manufacturing. To aid both educators as well as researchers, this paper examines several considerations that are essential for manufacturing plastic products that contain biomaterials. These include the selection of materials, the selection of manufacturing processes, manufacturing costs, and the quality of final products. Additionally, several standard methods that are commonly used for the determination of mechanical and physical properties are compiled; thus this paper should be a useful resource for both educators and researchers. The trends discussed here and their implications are critical for those involved in manufacturing, because contrary to conventional wisdom, simultaneously meeting the material production needs of our society, as well as that of the environment are not mutually-exclusive.