Behavior of cesium in fish tissues from Savannah River

A survey of cesium residues in fish from the Savannah River near the Savannah River Nuclear Plant was undertaken in 1983. Fish tissues, bone, fin, and muscle were incubated by the wet disgestion method for analysis. Seventeen fish samples were analyzed by flame atomic absorption spectrophotometry procedure to determine cesium content. It was found that cesium concentration levels were consistently higher in the bones and fins than in muscles of all fish species. It seems that cesium concentration levels were relatively higher in fins than in bones. Cesium concentration levels in muscle tissues were negligible in all fish species.     

Using uncertainty analysis to reduce costs at a pump-and-treat site

The former Nebraska Ordnance Plant site in east-central Nebraska was included on the National Priorities List because of explosives and trichloroethene contamination. The preferred groundwater remedy includes hydraulic containment of the contaminated groundwater and focused extraction of the more highly contaminated groundwater as components of the remedial action. The purpose of hydraulic containment is to stop the spread of contamination, while the more aggressive focused extraction will be used to speed up the remediation and reduce total cleanup costs. This case study illustrates how straightforward groundwater models were combined with uncertainty analysis to select a precise definition of the focused extraction areas. The purpose of the analysis was to reduce ultimate remediation costs, given the significant uncertainty associated with the estimated remediation times. The selected definition provides a basis for more sophisticated groundwater modeling, the goal of which was to locate extraction wells and define their flow rates. The batch flushing model provided the governing equations, and Monte Carlo analysis was used for the uncertainty analysis. All of the analysis was performed on a personal computer using commercially available software.     

The Estuarine Component of the Us E.P.A.'S Environmental Monitoring and Assessment Program

The US Environmental Protection Agency's Office of Research and Development has initiated the Environmental Monitoring and Assessment Program (EMAP) to monitor status and trends in the condition of the nation's near coastal waters, forests, wetlands, agro-ecosystems, surface waters, deserts and rangelands. the programme is also intended to evaluate the effectiveness of Agency policies at protecting ecological resources occurring in these systems. Monitoring data collected for all ecosystems will be integrated for regional and national status and trends assessments. the near coastal component of EMAP consists of estuaries, coastal waters, and the Great Lakes. Near coastal ecosystems have been regionalized and classified, and an integrated sampling strategy has been developed. EPA and NOAA have agreed to coordinate and, to the extent possible, integrate the near coastal component of EMAP with the NOAA National Status and Trends Program. A demonstration project was conducted in estuaries of the mid-Atlantic region (Chesapeake Bay to Cape Cod) in the summer of 1990. in 1991, monitoring continued in mid-Atlantic estuaries and was initiated in estuaries of a portion of the Gulf of Mexico. Preliminary results indicate: there are no insurmountable logistical problems with sampling on a regional scale; several of the selected indicators are practical and sensitive on the regional scale; and an efficient effort in future years will provide valuable information on condition of estuarine resources at regional scales.     

Trace elements in fish from the Savannah river near Savannah river nuclear plant

A survey of trace element residues in fish from the Savannah River near Savannah River Nuclear Plant was undertaken in 1982. Fish muscle tissue was incubated by the wet digestion method. Fifteen trace elements were determined by flame atomic absorption spectrophotometry analysi of the digests. It was found that As, Se, Mg, Hg, Ca, Zn, and Fe levels were relatively higher than Pb, Cd, Ni, Co, Cr, and Mn in all fish species. In addition, in all fish species it seems that Pb, Cd, Ni, Co, Cr, and Mn levels were relatively higher than Cs and Cu. Cs and Cu levels were negligible in all fish species analyzed. Trace element levels found in these fish species were not high enough to render them dangerous for human consumption.     

Growth in the bivalve Yoldia eightsi at Signy Island,Antarctica, determined from internal shell increments and calcium-45 incorporation

The growth rate of the infaunal nuculanid bivalve Yoldia eightsi at Factory Cove, Signy Island, South Orkney Islands (maritime Antarctica), was estimated from internal shell increments and ⁴⁵Ca incorporation of individuals collected monthly from December 1987 to April 1989. Acetate peels of etched shells revealed clear first-order increments, with less well defined, narrower, second-and third-order increments. The first-order increments were assumed to be annual, although there is no independent confirmation of this assumption. Unfortunately abrasion of the umbo region and the small thin shells of Y. eightsi meant that in no case could a complete sequence of increments be measured realiably on any individual shell. Measurements of 1043 first-order increments from 130 shells where a minimum of two consecutive increments could be detected were therefore pooled, and a population growth curve constructed from a Ford-Walford plot. This indicated a slow growth rate, with a maximum shell height of 22.3 mm (equivalent to a shell length of 35.6 mm) being reached at an age >60 yr. The size-frequency distribution of 1521 individuals pooled from winter (July to October) samples revealed a distinct lack of smaller (younger) individuals, possibly reflecting poor recruitment in areas of dense adult populations. The largest shell recovered in the samples was 33.5 mm in length, with an estimated age of 52 yr. Short-term ⁴⁵Ca-incorporation experiments indicated a mean daily rate of growth increment of 3.8 m for individuals of 12 mm shell height, which matches the proposed annual growth rate if growth is assumed to occur for about 150 d each year and the first-order increments are assumed to be annual.     

Changes in anoxic denitrification rate resulting from prefermentation of a septic, phosphorus-limited wastewater.

A preliminary bench-scale study of parallel University of Cape Town (UCT) biological nutrient removal systems showed improvement in anoxic denitrification rates resulting from prefermentation of a septic (i.e., high volatile fatty acid [VFA] content), phosphorus-limited (i.e., total chemical oxygen demand/total phosphorus [TP] ratio < 40:1) wastewater. Net phosphorus removals due to enhanced biological phosphorus removal (EBPR) were only improved marginally by prefermentation in spite of significant increases in anaerobic phosphorus release, polyhydroxyalkanoate formation, and higher anoxic and aerobic uptakes. This probably was due to the high VFA/TP ratio in the raw influent relative to the VFA requirements for EBPR because enough VFAs were already present for phosphorus removal prior to prefermentation. An additional assessment of prefermentation using parallel UCT systems with step feed of 50% of the influent to the anoxic zone was completed. This second phase quantified the effect of prefermentation in a step-feed scenario, which prioritized prefermentation use to enhance denitrification rather than EBPR. While specific denitrification rates in the anoxic zone were significantly improved by prefermentation, high denitrification in the clarifiers and aerobic zones (simultaneous denitrification) made definitive conclusions concerning the potential improvements in total system nitrogen removal questionable. The prefermented system always showed superior values of the zone settling velocity and sludge volume index and the improvement became increasingly statistically significant when the prefermenter was performing well.     

Refinement of the density-modified displacement method for efficient treatment of tetrachloroethene source zones

A novel method to remediate dense nonaqueous phase liquid (DNAPL) source zones that incorporates in situ density conversion of DNAPL via alcohol partitioning followed by displacement with a low interfacial tension (IFT) surfactant flood has been developed. Previous studies demonstrated the ability of the density-modified displacement (DMD) method to recover chlorobenzene (CB) and trichloroethene (TCE) from heterogeneous porous media without downward migration of the dissolved plume or free product. However, the extent of alcohol (n-butanol) partitioning required for in situ density conversion of high-density NAPLs, such as tetrachloroethene (PCE), could limit the utility of the DMD method. Hence, the objective of this study was to compare the efficacy of two n-butanol delivery approaches: an aqueous solution of 6% (wt) n-butanol and a surfactant-stabilized macroemulsion containing 15% (vol) n-butanol in water, to achieve density reduction of PCE-NAPL in two-dimensional (2-D) aquifer cells. Results of liquid-liquid equilibrium studies indicated that density conversion of PCE relative to water occurred at an n-butanol mole fraction of 0.56, equivalent to approximately 5 ml n-butanol per 1 ml of PCE when in equilibrium with an aqueous solution. In 2-D aquifer cell studies, density conversion of PCE was realized using both n-butanol preflood solutions, with effluent NAPL samples exhibiting density reductions ranging from 0.51 to 0.70 g/ml. Although the overall PCE mass recoveries were similar (91% and 93%) regardless of the n-butanol delivery method, the surfactant-stabilized macroemulsion preflood removed approximately 50% of the PCE mass. In addition, only 1.2 pore volumes of the macroemulsion solution were required to achieve in situ density conversion of PCE, compared to 6.4 pore volumes of the 6% (wt) n-butanol solution. These findings demonstrate that use of the DMD method with a surfactant-stabilized macroemulsion containing n-butanol holds promise as an effective source zone remediation technology, allowing for efficient recovery of PCE-DNAPL while mitigating downward migration of the dissolved plume and free product.     

Transient analysis of volatile organic compound concentrations for estimating emission rates

While emission rates of volatile organic compounds (VOCs) have been obtained for building materials, furnishings and processes in chambers, field measurements are more difficult. Procedures to estimate emission rates using transient analysis of VOC concentrations are described and applied in a two-story classroom/office building. The analysis employs semi-real-time VOC concentrations determined with a portable GC/FID and simultaneous air change rate measurements using tracer gas decay. The results of the analysis yield consistent values of emission rates for building materials ranging from 0.20 to 0.40 mg m⁻² h⁻¹ when normalized by floor area. Occupancy-related emissions were more difficult to estimate and covered a wider range from roughly 0.1 to 1.5 mg m⁻² h⁻¹. The test data were also analyzed in an attempt to determine sink parameters, but these efforts were not particularly successful. Furthermore, in these tests, the inclusion of sink effects did not significantly impact the estimated emission rates. While this paper offers a transient analysis approach that may lead to improved field estimates of VOC emission rates, it is not presented as a definitive methodology. Nevertheless, transient analysis has potential for use in other buildings, but simultaneous air change rate measurements are critical in its application in estimating VOC emission rates in the field.