Managing agricultural phosphorus for water quality: Lessons from the USA and China

The accelerated eutrophication of freshwaters and to a lesser extent some coastal waters is primarily driven by phosphorus （P） inputs. While efforts to identify and limit point source inputs of P to surface waters have seen some success, nonpoint sources remain difficult to identify, target, and remediate. As further improvements in wastewater treatment technologies becomes increasingly costly, attention has focused more on nonpoint source reduction, particularly the role of agriculture. This attention was heightened over the last 10 to 20 years by a number of highly visible cases of nutrient-related water quality degradation; including the Lake Taihu, Baltic Sea, Chesapeake Bay, and Gulf of Mexico. Thus, there has been a shift to targeted management of critical sources of P loss. In both the U.S. and China, there has been an intensification of agricultural production systems in certain areas concentrate large amounts of nutrients in excess of local crop and forage needs, which has increased the potential for P loss from these areas. To address this, innovative technologies are emerging that recycle water P back to land as fertilizer. For example, in the watershed of Lake Taihu, China one of the largest surface fresh waters for drinking water supply in China, local governments have encouraged innovation and various technical trials to harvest harmful algal blooms and use them for bio-gas, agricultural fertilizers, and biofuel production. In any country, however, the economics of remediation will remain a key limitation to substantial changes in agricultural production.     

Understanding the sources and composition of the incremental excess of fine particles across multiple sampling locations in one air shed

Well-designed health studies and the development of effective regulatory policies need to rely on an understanding of the incremental differences in particulate matter concentrations and their sources. Although only a limited number of studies have been conducted to examine spatial differences in sources to particulate matter within an air shed, routine monitoring data can be used to better understand these differences. Measurements from the US EPA Chemical Speciation Network （CSN） collected between 2002-2008 were analyzed to demonstrate the utility of regulatory data across three sites located within 100 km of each other. Trends in concentrations, source contribution, and incremental excesses across three sites were investigated using the Positive Matrix Factorization model. Similar yearly trends in chemical composition were observed across all sites, however, excesses of organic matter and elemental carbon were observed in the urban center that originated from local emissions of mobile sources and biomass buming. Secondary sulfate and secondary nitrate constituted over half of the PM2.5 with no spatial differences observed across sites. For these components, the excess of emissions from industrial sources could be directly quantified. This study demonstrates that CSN data from multiple sites can be successfully used to derive consistent source profiles and source contributions for regional pollution, and that CSN data can be used to quantify incremental differences in source contributions of across these sites. The analysis strategy can be used in other regions of the world to take advantage of existing ambient particulate matter monitoring data to better the understanding of spatial differences in source contributions within a given air shed.     

The release of phosphorus to porewater and surface water from river riparian sediments

Sediments can be both a source and a sink of dissolved phosphorus (P) in surface water and shallow groundwater. Using laboratory mesocosms, we studied the influence of flooding with deionized water and simulated river water on P release to solution using sediment columns taken from a riparian wetland. The mesocosm incubation results showed that rather than retaining nutrients, sediments in the riparian zone may be a significant source of P. Concentrations of dissolved P in porewater reached more than 3 mg L(-1) and in surface water over 0.8 mg L(-1) within a month of sediment inundation. The reductive dissolution of P-bearing iron (Fe) oxides was the likely mechanism responsible for P release. Dissolved P to Fe molar ratios in anaerobic samples were approximately 0.45 when columns were flooded with water that simulated the chemistry of the adjacent river. This suggests there was insufficient Fe in the anaerobic samples to precipitate all P if the solutions were oxygenated or transported to an aerobic environment. If the anaerobic wetland solutions were delivered to oxygenated rivers and streams adjacent to the riparian zone, the equilibrium concentration of P in these systems could rise. The timing of P release was inversely related to the nitrate (NO3-) concentration in floodwater. This indicates that in riparian zones receiving low nitrate loads, or where NO3- loads are being progressively reduced, the risk of dissolved P release may increase. These findings present particular challenges for restoration and management in riparian areas.     

Modelling photochemical oxidant formation, transport, deposition and exposure of terrestrial ecosystems

The chemical processes responsible for production of photochemical oxidants within the troposphere have been the subject of laboratory and field study throughout the last three decades. During the same period, models to simulate the atmospheric chemistry, transport and deposition of ozone (O(3)) from individual urban sources and from regions have been developed. The models differ greatly in the complexity of chemical schemes, in the underlying meteorology and in spatial and temporal resolution. Input information from land use, spatial and temporally disaggregated emission inventories and meteorology have all improved considerably in recent years and are not fully implemented in current models. The development of control strategies in both North America and Europe to close the gaps between current exceedances of environmental limits, guide values, critical levels or loads and full compliance with these limits provides the focus for policy makers and the support agencies for the research. The models represent the only method of testing a range of control options in advance of implementation. This paper describes currently applied models of photochemical oxidant production and transport at global and regional scales and their ability to simulate individual episodes as well as photochemical oxidant climatology. The success of current models in quantifying the exposure of terrestrial surfaces and the population to potentially damaging O(3) concentrations (and dose) is examined. The analysis shows the degree to which the underlying processes and their application within the models limit the quality of the model products.     

A detailed analysis of musculoskeletal disorder risk factors among Japanese nurses

INTRODUCTION: Although Musculoskeletal Disorders (MSD) represent a common occupational problem, few epidemiological studies have investigated MSD risk factors among Asian nurses, particularly those in Japan. METHOD: We administered a modified Japanese-language version of the Standardized Nordic Questionnaire to 1,162 nurses from a large teaching hospital. MSD categories focused on the neck, shoulder, upper back, and lower back regions. RESULTS: A total of 844 completed questionnaires were analyzed (response rate: 72.6%). The 12-month period-prevalence of MSD at any body site was 85.5%. MSD was most commonly reported at the shoulder (71.9%), followed by the lower back (71.3%), neck (54.7%), and upper back (33.9%). Alcohol consumption, tobacco smoking, and having children were shown to be significant risk factors, with adjusted Odds Ratios of 1.87 (95%CI: 1.17-2.96), 2.45 (95%CI: 1.43-4.35), and 2.53 (95%CI: 1.32-4.91), respectively. Workplace risk factors included manually handling patients (OR: 2.07 to 11.97) and undertaking physically laborious work (OR: 2.09 to 2.76). Nurses reporting pre-menstrual tension were 1.66 and 1.94 times more likely to suffer from lower back and upper back MSD, respectively. High mental pressure was also identified as a significant risk factor for MSD of the neck (OR: 1.53) and shoulder (OR: 2.07). IMPACT ON INDUSTRY: The complex nature of MSD risk factors identified during this study suggests that remediation strategies which focus only on manual handling tasks would probably be suboptimal in reducing MSD among nurses. Therefore, to help alleviate their considerable MSD burden, a greater emphasis will need to be placed on job satisfaction, work organization, and occupational stress, as well as the more traditional hazard reduction strategies such as manual handling, work tasks, and other occupational factors.     

Experimental verification of ecological niche modeling in a heterogeneous environment

The current range of ecological habitats occupied by a species reflects a combination of the ecological tolerance of the species, dispersal limitation, and competition. Whether the current distribution of a species accurately reflects its niche has important consequences for the role of ecological niche modeling in predicting changes in species ranges as the result of biological invasions and climate change. We employed a detailed data set of species occurrence and spatial variation in biotic and abiotic attributes to model the niche of a native California annual plant, Collinsia sparsiflora. We tested the robustness of our model for both the realized and fundamental niche by planting seeds collected from four populations, representing two ecotypes, into plots that fully represented the five-dimensional niche space described by our model. The model successfully predicted which habitats allowed for C. sparsiflora persistence, but only for one of the two source ecotypes. Our results show that substantial niche divergence has occurred in our sample of four study populations, illustrating the importance of adequately sampling and describing within-species variation in niche modeling.     

Arsenic, Cadmium, Lead, and Mercury in surface soils, Pueblo, Colorado: implications for population health risk

Decades of intensive industrial and agricultural practices as well as rapid urbanization have left communities like Pueblo, Colorado facing potential health threats from pollution of its soils, air, water and food supply. To address such concerns about environmental contamination, we conducted an urban geochemical study of the city of Pueblo to offer insights into the potential chemical hazards in soil and inform priorities for future health studies and population interventions aimed at reducing exposures to inorganic substances. The current study characterizes the environmental landscape of Pueblo in terms of heavy metals, and relates this to population distributions. Soil was sampled within the city along transects and analyzed for arsenic (As), cadmium (Cd), mercury (Hg) and lead (Pb). We also profiled Pueblo’s communities in terms of their socioeconomic status and demographics. ArcGIS 9.0 was used to perform exploratory spatial data analysis and generate community profiles and prediction maps. The topsoil in Pueblo contains more As, Cd, Hg and Pb than national soil averages, although average Hg content in Pueblo was within reported baseline ranges. The highest levels of As concentrations ranged between 56.6 and 66.5 ppm. Lead concentrations exceeded 300 ppm in several of Pueblo’s residential communities. Elevated levels of lead are concentrated in low-income Hispanic and African-American communities. Areas of excessively high Cd concentration exist around Pueblo, including low income and minority communities, raising additional health and environmental justice concerns. Although the distribution patterns vary by element and may reflect both industrial and non-industrial sources, the study confirms that there is environmental contamination around Pueblo and underscores the need for a comprehensive public health approach to address environmental threats in urban communities.     

Comparative assessment of coal tars obtained from 10 former manufactured gas plant sites in the eastern United States

A comparative analysis was performed on eleven coal tars obtained from former manufactured gas plant sites in the eastern United States. Bulk properties analyzed included percent ash, Karl Fisher water content, viscosity and average molecular weight. Chemical properties included monocyclic- and polycyclic-aromatic hydrocarbon (PAH) concentrations, alkylated aromatic concentrations, and concentrations of aliphatic and aromatic fractions. It was found that there was at least an order-of-magnitude variation in all properties measured between the eleven coal tars. Additionally, two coal tars obtained from the same manufactured gas plant site had very different properties, highlighting that there can be wide variations in coal tar properties from different samples obtained from the same site. Similarities were also observed between the coal tars. The relative chemical distributions were similar for all coal tars, and the coal tars predominantly consisted of PAHs, with naphthalene being the single-most prevalent compound. The C(9-22) aromatic fraction, an indicator of all PAHs up to a molecular weight of approximately 276 gmole(-1), showed a strong power-law relationship with the coal tar average molecular weight (MW (ct)). And the concentrations of individual PAHs decreased linearly as MW (ct) increased up to ca. 1000 gmole(-1), above which they remained low and variable. Implications of these properties and their variation with MW (ct) on groundwater quality are discussed. Ultimately, while these similarities do allow generalities to be made about coal tars, the wide range of coal tar bulk and chemical properties reported here highlights the complex nature of coal tars.     

Contamination in sediments, bivalves and sponges of McMurdo Sound, Antarctica

This study examined the concentrations of total hydrocarbons (THC), polychlorinated biphenyls (PCB), polyaromatic hydrocarbons (PAH), and trace metals (Cu, Zn, Cd, Pb, Hg and As) in marine sediments off Scott Base (NZ) and compared them with sediments near the highly polluted McMurdo Station (US) as well as less impacted sites including Turtle Rock and Cape Evans. The Antarctic mollusc, Laternula elliptica and three common sponge species were also analysed for trace metals. The mean THC concentration in sediments from Scott Base was 3 fold higher than the pristine site, Turtle Rock, but 10 fold lower than samples from McMurdo Station. McMurdo Station sediments also contained the highest concentrations of PAHs, PCBs and the trace metals, Cu, Zn, Pb, Cd and Hg. Copper was significantly higher in bivalves from McMurdo Station than other sites. Trace metal concentrations in sponges were generally consistent within sites but no spatial patterns were apparent.