Deformation patterns in WorldSID 50th percentile dummy instrumented with IR-TRACC and RibEye™ in different loading configurations

Objective: The purpose of this study was to investigate the effect of different loading configurations on the WorldSID 50th percentile male dummy instrumented either with the Infra-Red Telescoping Rod for the Assessment of Chest Compression (IR-TRACC) or the RibEye? rib deflection measurement system.

Methods: The optical sensors of the RibEye system were used to capture the multipoint deformation of the dummy at frontal and rearward off-center locations in addition to the center of the rib location. The experimental setup consisted of 2 types of loadings: Low severity and high severity. Low-severity loading was performed by deploying a fixture-mounted side airbag on the dummy and high-severity loading was achieved by deploying a driver front airbag mounted in a similar fashion. The low-severity condition aimed at deforming the dummy’s ribs locally at off-center locations where the RibEye light emitting diodes (LEDs) were positioned to capture the deformations at those locations. The high-severity condition aimed at loading the dummy at high speed in lateral and oblique directions similar to what is experienced by dummies in side impacts.

Results: In the low-severity tests, the peak deflections, in terms of length change, were approximately 15–20?mm, whereas for the high-severity cases the peak deflections were in the range of 30–40?mm for both IR-TRACC and RibEye cases.

Conclusions: For similar physical insults, dummies with the IR-TRACC and RibEye systems showed varying results for both length changes and the shoulder forces depending on the severity and direction of loading. Under purely lateral loading, the mid-length changes with the RibEye and the 1D IR-TRACC were comparable. In the oblique loading conditions, more differences were seen with the 2 systems depending on the impact direction. The shoulder forces consistently differed between the 2 systems. In the frontal oblique low-severity cases, the ribs pivoted along the spine end and the length change was not found to be a suitable parameter to quantify rib deformation in such loading scenarios.     

Assessment of biomass and lipid productivity and biodiesel quality of an indigenous microalga Chlorella sorokiniana MIC-G5

Generation of biodiesel from microalgae has been extensively investigated; however, its quality is often not suitable for use as fuel. Our investigation involved the evaluation of biodiesel quality using a native isolate Chlorella sorokiniana MIC-G5, as specified by American Society for Testing and Materials (ASTM), after transesterification of lipids with methanol, in the presence of sodium methoxide. Total quantity of lipids extracted from dry biomass, of approximately 410–450 mg g^?1 was characterized using FTIR and ¹H NMR. After transesterification, the total saturated and unsaturated fatty acid methyl esters (FAMEs) were 43% and 57%, respectively. The major FAMEs present in the biodiesel were methyl palmitate (C16:0), methyl oleate (C18:1), and methyl linoleate (C18:2), and the ¹H NMR spectra matched with criteria prescribed for high-quality biodiesel. The biodiesel exhibited a density of 0.873 g cm^–3, viscosity of 3.418 mm² s^?1, cetane number (CN) of 57.85, high heating value (HHV) of 40.25, iodine value of 71.823 g I₂ 100 g^?1, degree of unsaturation (DU) of 58%, and a cold filter plugging point (CFPP) of –5.22°C. Critical fuel parameters, including oxidation stability, CN, HHV, iodine value, flash point, cloud point, pour point, density, and viscosity were in accordance with the methyl ester composition and structural configuration. Hence, C. sorokiniana can be a promising feedstock for biodiesel generation.     

Long-range potential source contributions of episodic aerosol events to PM10 profile of a megacity

This paper evaluates possible long-range source contributions to the PM₁₀ profile of Istanbul, Turkey. A novel method for classifying PM₁₀ episodic events resulting from long-range transport, as opposed to local ones, was implemented. Hourly PM₁₀ mass concentrations from ten stations distributed throughout Istanbul during the year 2008 were used for this purpose. Hourly backward trajectories for the arrival of air masses to the center of Istanbul for the year 2008 were calculated using the HYSPLIT (Hybrid Single-Particle Lagrangian Integrated Trajectory) model. Significant episodes from these backward trajectories were selected and employed in Potential Source Contribution Function (PSCF) analysis to estimate the possible contribution of long-range PM₁₀ transport (LRPMT) to observed PM₁₀ concentrations. The PSCF results showed significant seasonal variations. Based on the results obtained, PM₁₀ concentrations observed in Istanbul during summer and autumn are not heavily affected by LRPMT. Mediterranean countries, especially those of the central part of northern Africa (northern Algeria and Libya) are the most significant potential PM₁₀ contributors to Istanbul's atmosphere during springtime. During winter, Balkan countries, including the Aegean part of Turkey, Greece, Bulgaria, Serbia, and Croatia, as well as northern Italy, eastern France, southern Germany, Austria and the eastern part of Russia, were the most important LRPMT source regions for high PSCF values.     

Continuous Safety Sampling Methodology

This research introduces a proactive methodology for accident prevention, called Continuous Safety Sampling Methodology, by utilizing the principles of work sampling and control charting. Sampling is performed to observe the occurrence of conditions that may become hazardous in a given system. These conditions, known as dendritics, may become hazards and could result in an accident or occupational disease. Continuous Safety Sampling Methodology performs a random sampling for the occurrence of these dendritics. The collected data are then used to generate a control chart. Based on the pattern of the control chart, a system “under control” is not disturbed whereas a system “out of control” is investigated for potential conditions becoming hazardous. Appropriate steps are then taken to eliminate or control these conditions to maintain a desired safe system.     

Isolation and screening of sulfur-oxidizing bacteria from coast of Bhavnagar,India, and formulation of consortium for bioremediation

Environmental Science and Pollution Research - Reduced sulfur compounds are a nuisance in coastal industries causing heavy economical as well as ecological loss. One such compound, hydrogen...     

Gyrineum natator: a potential indicator of imposex along the Indian coast

Imposex related studies have used neogastropods as sentinel organism. In this effort, we elucidate the potential of a mesogastropod, Gyrineum natator, for imposex monitoring on the central west coast of India. Observations were made with specimens collected from Mumbai (three stations), Ratnagiri (two stations), Goa (one station) and Mangalore (one station). The analyzed populations at all four sites were affected by imposex. The six different stages of imposex in this organism are illustrated through schematic and scanning electron micrographs. In view of the anticipated ban on TBT based antifouling paints this baseline information can serve as an indicator for environmental monitoring in this region.     

Thraustochytrid protists as a component of marine microbial films

Although ubiquitous in the marine environment, the presence and importance of thraustochytrid fungoid protists in primary film formation of freshly immersed surfaces in the sea have not been investigated. We isolated thraustochytrids from surfaces of glass, aluminium, mild steel and fibre glass panels immersed in sea water for 1 to 4 d, but not from those of copper and cupro-nickel. Microscopic examination of the primary film on glass surfaces revealed the presence of thraustochytrids. Thraustochytrids grew to varying population densities on surfaces of glass, aluminium and fibre glass in the laboratory. Scanning electron microscopy of the growth of Ulkenia profunda Gaertner, isolated from the primary film, on surfaces of glass and aluminium suggested that cells of the thraustochytrid attached directly to the surfaces, without producing copious extracellular polysaccharides. The presence of ectoplasmic net elements was not a prerequisite for attachment of cells to surfaces. Cell surface hydrophobicity of the thraustochytrid, as estimated by the MATH assay, might play an important role in adhesion. The presence of thraustochytrid cells on a polystyrene surface markedly induced settlement of barnacle larvae (Balanus amphitrite), as compared to barnacle extract and a control. Received: 26 July 1999 / Accepted: 21 January 2000     

Dinoflagellate community structure from the stratified environment of the Bay of Bengal, with special emphasis on harmful algal bloom species

Harmful algal blooms (HABs) have been documented along the coasts of India and the ill effects felt by society at large. Most of these reports are from the Arabian Sea, west coast of India, whereas its counterpart, the Bay of Bengal (BOB), has remained unexplored in this context. The unique characteristic features of the BOB, such as large amount of riverine fresh water discharges, monsoonal clouds, rainfall, and weak surface winds make the area strongly stratified. In this study, 19 potentially harmful species which accounted for approximately 14% of the total identified species (134) of dinoflagellates were encountered in surface waters of the BOB during November 2003 to September 2006. The variations in species abundance could be attributed to the seasonal variations in the stratification observed in the BOB. The presence of frequently occurring HAB species in low abundance (≤ 40 cell L(?-1)) in stratified waters of the BOB may not be a growth issue. However, they may play a significant role in the development of pelagic seed banks, which can serve as inocula for blooms if coupled with local physical processes like eddies and cyclones. The predominance of Ceratium furca and Noctiluca scintillans, frequently occurring HAB species during cyclone-prone seasons, point out their candidature for HABs.     

Variations in phytoplankton community in a monsoon-influenced tropical estuary

In a monsoon-affected tropical estuary, oscillations in freshwater discharge during monsoon shifted the phytoplankton blooms from those adapted to low salinities to high salinities and vice versa. Salinity stratification during monsoon (onset and restart after an intermittent break) favored diatom (Skeletonema) bloom in low-saline surface waters. In high-saline, nutrient-rich bottom waters, Fragilariopsis (diatom) bloom was observed during onset of monsoon and persisted till the end of monsoon. The break period in monsoon altered the phytoplankton community leading to mixed species bloom of large-sized diatoms and harmful dinoflagellates (Gymnodinium catenatum and Cochlodinium polykrikoides) under high-saline, nutrient-poor, non-stratified, and transparent water column. Such variations in community should be considered for better understanding the biogeochemistry of monsoon-influenced tropical estuaries. The dominance of Skeletonema is determined positively by the extent of low-saline stratified condition whereas most of the observed taxa were favored by high-saline, nutrient-poor, and transparent waters.     

Nutrient concentrations affect the antimicrobial resistance profiles of cattle manures

Environmental Science and Pollution Research - Antimicrobial resistance (AMR) in cattle is widespread because of the increased use of antibiotics to combat microbial diseases and enhance milk...