生态环境变化遥感评价指数的应用研究——以敖江流域为例

利用1994年5月12日与2009年6月6日的Landsat TM和2001年5月23日的Landsat ETM＋卫星影像,选用遥感生态指数（RSEI）,结合流域的植被覆盖度状况,定量评价了15年间敖江流域的生态环境变化与植被覆盖度变化情况,并对二者的关系进行了简要分析.结果表明：15年间,敖江流域生态等级为优所占的面积比例从13.48％上升到24.90％,增加了304.29 km2;植被覆盖度等级为极高的面积增加比例为29.31％.总体看来,敖江流域生态环境状况和植被覆盖状况均有明显的提高,两者具有较好的对应关系.     

兴仁高砷煤矿区溪流水系环境中砷自然净化的初步研究

为了解矿山环境中砷的自然净化能力及其净化机制,对兴仁典型高砷煤矿区溪流水系环境进行采样分析。结果表明,研究区水体和沉积物中砷含量从上游到下游均呈不断降低的变化趋势,水体显示较强的自净能力。上游水体中砷含量的降低主要是吸附沉淀作用,而溪流的简单稀释作用在下游也显得非常重要。     

污泥减量化与资源化研究进展

随着污水处理量增加,污泥的产生量也日益巨大.如何使污泥无害化、减量化和资源化已越来越受人们的关注.针对目前传统污泥处理与处置方法存在的问题,重点介绍了近年来污泥减量化和资源化的处理技术,并分析了新技术研究情况和应用前景,为污泥合理处理与处置提供参考.     

垃圾焚烧炉渣对电镀废水中Cu的吸附特性

以垃圾焚烧炉渣作吸附剂,对电镀废水中Cu的吸附特性进行了研究,包括吸附速率、解吸速率、吸附等温线和连续柱吸附实验等。结果表明,炉渣对电镀废水中Cu的吸附平衡时间和解吸平衡时间均为8 h。炉渣对Cu的吸附等温线为直线型,可用Henry型方程进行拟合。连续柱吸附实验结果表明,炉渣对电镀废水在连续吸附55 h后吸附能力逐渐丧失,累计最大吸附量为921 μg/g,而炉渣对人工配水在连续吸附80 h后吸附能力完全丧失,累计最大吸附量为2 687 μg/g。     

超声/Fenton联用技术处理垃圾渗滤液中的有机物

详细研究了超声/Fenton联用技术对垃圾渗滤液中有机物的处理效果.研究内容包括:超声波频率对垃圾渗滤液色度和COD去除率的影响,超声波功率对垃圾渗滤液色度和COD去除率的影响以及Fenton试剂用量和pH值对垃圾渗滤液色度去除率和COD去除率的影响.还利用一次正交回归实验确定了超声/Fenton联用技术处理垃圾渗滤液的优化条件,并在优化条件的基础上,对超声波技术、Fenton高级氧化技术和超声/Fenton联用技术对垃圾渗滤液的处理效果进行比较研究.研究结果表明:超声/Fenton联用技术对垃圾渗滤液的色度去除率和COD去除率最高,其色度去除率接近100%,COD去除率达到73.5%.超声/Fenton联用技术处理垃圾渗滤液的优化条件是:超声频率为28 kHz,超声功率为75W,Fe2 浓度为280 mg/L,H2O2浓度为1.29×104 mg/L,pH值为2.5.超声波的频率、功率和Fenton试剂用量之间存在优化匹配值.     

山梨酸废水在ABR中的基质降解行为

稳态条件下,采用厌氧折流板反应器(anaerobic baffled reactor,ABR)处理山梨酸废水并进行基质降解动力学研究.实验表明,在污泥负荷为0.54～1.63 kg COD/(kg VSS·d)的范围内,COD去除率随着负荷的增加从85%降到55%.各隔室出水COD沿程递减,前3个隔室承担了去除COD的重要作用,但随着污泥负荷的增加,后部承担的COD去除率比例增大.基于各串联隔室完全混合的假定,推导ABR中山梨酸废水的基质降解动力学方程,并通过实验确定相关动力学参数及相应的动力学方程.实测值与预测值基本吻合.     

Sorption of phenanthrene by dissolved organic matter and its complex with aluminum oxide nanoparticles

Intent of this study was to explore the potential application of polymerin, the polymeric, dissolved organic matter fraction from olive oil wastewaters, in technologies aimed at remediating hydrophobic organic compounds (HOCs) point-source pollution. Phenanthrene binding with polymerin was investigated. Moreover, the effect of addition of micro and nanoscale aluminum oxides (Al₂O₃) was studied, as well as sorption of polymerin on the oxides. Phenanthrene binding capacity by polymerin was notably higher than the sorption capacities for both types of Al₂O₃ particles. Polymerin sorption on nanoparticles was nearly 100 times higher than microparticles. In a three-phase system, using microparticles, higher phenanthrene sorption was found by adding into water polymerin, oxides and phenanthrene simultaneously. In contrast, using nanoparticles, a considerable enhancement of phenanthrene sorption was shown by adding phenanthrene to a pre-formed and dried polymerin-oxide complex. These findings support the application of polymerin, especially associated with Al₂O₃ nanoparticles, in remediation of water contaminated with HOCs. This work highlights the significant role of nanoparticles.     

umu试验菌种保存条件优化研究

研究了umu试验菌株(Salmonella typhimurimu TA1535/pSK1002)的菌种在普通冰箱中保存时其生长曲线和活性的变化,菌种经活化后可以得到稳定的活化生长曲线以及比较稳定的4-NQO活性曲线.通过菌种活化,使得umu试验菌种在普通冰箱中保存就能具有很好的活性和稳定性,极大地降低了保存难度,简化了菌种保存操作步骤,增加了试验的可重复性,有利于umu试验在实际环境样品检测中的应用.     

Pb/Zn冶炼废渣中重金属的生物浸出-盐浸处理

利用中温嗜热菌对某铅锌冶炼废渣进行生物浸出盐浸处理研究,并根据国家固体废物浸出毒性方法(HJ/T299-2007)对盐浸后余渣进行毒性分析。研究结果表明,在pH 1.5、温度65℃、矿浆浓度5%的优化条件下生物浸出3 d后,废渣中Cu、In、Ga和Zn的浸出率分别达到了91.5%、91.8%、84.9%和93.4%;盐浸生物浸出渣,其浸出液中Ag、Pb浓度分别为7.6和247.5 mg/L,可从废渣中有效回收Cu、In、Ga、Zn、Ag和Pb。生物浸出盐浸处理后余渣约为原渣量的70%;毒性分析浸出液中重金属元素Ag、As、Cd、Cu、Pb和Zn浓度分别为2～3.5、2～3、0.3～0.5、30～50、2～4、20～60 mg/L,低于国家危险废物鉴别标准(GB5085.3-2007)。根据试验结果,提出了针对冶炼废渣资源化、减量化、无害化的生物浸出盐浸联用工艺。     

The role of mechanical and biological treatment in reducing methane emissions from landfill disposal of municipal solid waste in the United Kingdom

In Europe, the European Union Landfill Directive aims to reduce the negative environmental impacts of landfilling. This is mainly to be achieved by reducing the quantity of organic matter deposited, through measures such as the separate collection and recycling of the organic waste stream or pretreatment of residual wastes before landfilling. Other than incineration or other thermal processes, mechanical biological treatment is playing an increasingly important role. This study was conducted to seek the benefits of municipal solid waste (MSW) pretreatment, as well as the differences in methane production from the landfilling of untreated and mechanically/biologically treated (MBT) MSW using GasSim simulation. Results demonstrated that methane production rates vary significantly among waste fractions. Those that contribute most to methane generation (organic material and potentially reusable or recyclable material) could be targeted and treated before landfilling. The statistic relationship from the first phase of the study indicated that to match the increasingly stringent landfill waste organic content allowance, local councils should prioritize the reduction/sorting of certain targeted fractions, such as paper, card, green waste, and other putrescibles from MSW. Moreover, mechanical treatment alone produces organic-rich waste called mechanically sorted organic residues (MSORs), which can be viewed as an organic content concentration process. Mechanically and biologically pretreated waste, on the other hand, differs significantly from untreated MSW and MSORs. This work demonstrated that if efficient mechanical-biological treatment is used, considerable reductions in biological activity, landfill gas production, and energy content/total organic carbon could be achieved. Using GasSim, reductions in methane production of >74% have been simulated if a 90% organic content reduction can be achieved during biological treatment on MSORs. A 50-60% organic content reduction by following biological treatment can turn MSOR properties only into normal MSW equivalent though considerably less volume.