Heavy metal extractable forms in sludge from wastewater treatment plants

The analysis of heavy metals is a very important task to assess the potential environmental and health risk associated with the sludge coming from wastewater treatment plants (WWTPs). However, it is widely accepted that the determination of total elements does not give an accurate estimation of the potential environmental impact. So, it is necessary to apply sequential extraction techniques to obtain a suitable information about their bioavailability or toxicity. In this paper, a sequential extraction scheme according to the BCR's guidelines was applied to sludge samples collected from each sludge treatment step of five municipal activated sludge plants. Al. Cd, Co, Cu, Cr, Fe, Mn, Hg, Mo, Ni, Pb, Ti and Zn were determined in the sludge extracts by inductively coupled plasma atomic emission spectrometry. In relation to current international legislation for the use of sludge for agricultural purposes none of metal concentrations exceeded maximum permitted levels. In most of the metal elements under considerations, results showed a clear rise along the sludge treatment in the proportion of two less-available fractions (oxidizable metal and residual metal).     

Priority assessment of toxic substances in life cycle assessment. Part I: calculation of toxicity potentials for 181 substances with the nested multi-media fate, exposure and effects model USES-LCA

Toxicity potentials are standard values used in life cycle assessment (LCA) to enable a comparison of toxic impacts between substances. In most cases, toxicity potentials are calculated with multi-media fate models. Until now, unrealistic system settings were used for these calculations. The present paper outlines an improved model to calculate toxicity potentials: the global nested multi-media fate, exposure and effects model USES-LCA. It is based on the Uniform System for the Evaluation of Substances 2.0 (USES 2.0). USES-LCA was used to calculate for 181 substances toxicity potentials for the six impact categories freshwater aquatic ecotoxicity, marine aquatic ecotoxicity, freshwater sediment ecotoxicity, marine sediment ecotoxicity, terrestrial ecotoxicity and human toxicity, after initial emission to the compartments air, freshwater, seawater, industrial soil and agricultural soil, respectively. Differences of several orders of magnitude were found between the new toxicity potentials and those calculated previously.     

Effects of cadmium on the performance and microbiology of laboratory-scale lagoons treating domestic sewage

Two experiments were performed to assess the impact of cadmium on the sewage lagoon wastewater treatment process. For each one, three laboratory-scale pilot plants with one tank receiving the same raw effluent were used; one plant served as control and the other two were contaminated once only with cadmium. In the first study, the effects of a shock load of two concentrations of cadmium chloride (60 and 300 micrograms/l) on the plant performance, microbial populations (protists and bacteria) and enzyme activities were determined. Initially, most of the performance parameters were affected concentration-dependently. A reduction in the protist population density and some influence on the total bacterial population were observed, and the potential enzymatic activities were also modified. A second experiment with a lower cadmium concentration (30 micrograms/l), supplied as chloride or sulphate, still perturbed most of the parameters studied, and the effects of the two cadmium salts were identical.     

A laboratory study of the mineralization and binding of 14C-labeled herbicide rimsulfuron in a rendzina soil.

The fate of pyrimidine-2-14C-rimsulfuron in a rendzina soil was investigated using a laboratory microcosm approach. Measurement of CO2 evolution suggested that rimsulfuron applied at 5 times the recommended dose did not affect soil respiration. Under abiotic conditions, no mineralization of 14C-rimsulfuron into 14C-CO2 occurred and under biotic ones it was very low reaching 0.75% of the applied 14C-rimsulfuron after 246 days of incubation. The analysis of data showed that a three-half order model provided the best fit for the mineralization curve. Extractable 14C-residues decreased over time to 70-80% of the applied 14C-rimsulfuron at the end of the incubation. After 246 days of incubation, non extractable residues (NER) accounted for up to 24.7% of the applied 14C-rimsulfuron and were distributed according to organic carbon in soil size fractions, suggesting a progressive incorporation process of NER to soil humus.     

Metallothionein induction and cadmium uptake in Bufo arenarum embryos following an acclimation protocol

Bufo arenarum embryos at the end of their embryonic development were acclimated to cadmium (Cd) by means of a 10-day treatment protocol. Embryos were processed for metallothionein (Mt) isolation and Cd and zinc (Zn) contents were measured. The results showed that: (1) the uptake of Cd in the experimental embryos was 7 microg/g embryo (wet weight) representing a bioaccumulation of Cd 255 times higher than in the maintaining medium; (2) a major Mt-like fraction was Cd-induced 7.8 times that in control embryos; two other protein fractions also bound Cd and Zn but were induced by Cd only about 2 and 1.4 times; (3) the Zn concentration was about 44 microg Zn/g embryo (wet weight) and did not change significantly (p>0.01) in the experimental embryos with respect to controls, but in acclimated embryos the essential metal was released from the Mts. The enhanced Mt synthesis and release of Zn from the native Mts are discussed in relation to the acclimation phenomenon.     

Surfactant solubilization of hydrophobic compounds in soil and water

The soil/water partition coefficient (K_d) of hexachlorobenzene (HCB) ranged from 220 1/kg to 1800 1/kg for eight soils having a wide range of physico-chemical properties. K_d normalised to soil organic carbon (K_oc) was found to be 28000 ± 4800 1/kg. Anionic surfactant dodecylsulphate (DS) present at concentrations above the critical micellar concentration (CMC) caused reductions in the apparent soil/water partition coefficient (K_d ^*) in the range of 3–26 times for most soils and up to 36–91 times for sandy soils. Below CMC, at environmentally relevant surfactant concentrations, K_d ^* was reduced by a factor of 1–13. For clay and calcareous soils significant adsorption/complexation/precipitation of DS occurred. At the lowest DS concentration this produced a two-fold increase in K_d ^*. At increasing DS concentrations this effect was shielded by the solubihzing effect from DS. Monomer (K_mn) and micellar (K_mc) surfactant/water partition coefficients for HCB were determined to be, 980 ± 190 1/kg and 21000 ± 1600 1/kg, respectively.     

Estimations of real-world N2O emissions from road vehicles by means of measurements in a traffic tunnel

Ambient air measurements of N2O, NOx, CO, and HC based on grab sampling were conducted in a major traffic tunnel in Sweden, that carries up to 4,000 vehicles per hour, in order to estimate real-world emissions of N2O for road traffic. Two different methods--relative and mass balance-were used to calculate a N2O emission factor for the mixed vehicle fleet, which gave an average emission factor, at average speeds of 30-70 km/h, of approximately 25 mg N2O/ km, with a range of 7-56 mg/km.     

Studies on metal content in the brown seaweed, Fucus vesiculosus, from the Archipelago of Stockholm

Concentrations of eleven metals (Al, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, V and Zn) were determined in the brown seaweed Fucus vesiculosus collected from the Archipelago of Stockholm. Several factors which influence the metal content in the seaweed have been studied, including errors caused by epiphytes, sea exposure and differences depending on which part of the seaweed is analysed. It is concluded that, if all these factors are considered, Fucus vesiculosus plants are excellent bio-indicators of metal pollution. This is also demonstrated by a significant increase in metal content in transplanted Fucus vesiculosus near the city of Stockholm. The results from this investigation also indicate increasing metal concentrations, especially Cd, in samples from the northern parts of the Archipelago and the reason for this is discussed.     

Biopesticide and formulation processes based on starch industrial wastewater fortified with soybean medium

Abstract

The aim of this study was to produce Bacillus thuringiensis-based biopesticide using starch-producing industry wastewater (SIW) fortified with soybean medium and optimize the formulated product using different adjuvants. This study was necessary as low endotoxin concentration is obtained in formulated biopesticide when SIW alone is used as fermentation medium. The fermentation runs were conducted using SIW alone and SIW fortified with 25% soybean (w/v) medium in 2000?L and 150?L bioreactor, respectively. SIW supplemented with soybean medium showed an increase in cell count (from 1.95?×?10⁸ to 1.65?×?10⁹ CFU mL^–1), spore synthesis (from 1.5?×?10⁸ to 1.35?×?10⁹ CFU mL^–1) and endotoxin concentration (from 436 to 1170?μg mL^–1) when compared to SIW medium alone. The fermented broth was concentrated using continuous centrifugation and adjuvants were added for biopesticide formulation in order to enhance its resistance against UV rays and rainfastness. Entomotoxicity of the formulation produced using fermented broth of SIW fortified with soybean (38,000?IU μL^–1) was higher than that obtained by SIW medium alone (21,000?IU μL^–1), commercial biopesticide Foray 76B (20,000?IU μL^–1) and Btk sander’s (12,500?IU μL^–1).     

Impact of ozone on the growth of birch (Betula pendula) saplings

Saplings of one half-sib family of birch, Betula pendula, were exposed to three levels of ozone in open-top chambers (OTCs) during two growing seasons 1997-1998. The ozone treatments were non-filtered air (NF, accumulated daylight AOT40 over the two growing seasons of 3.0 l l-1 h), non-filtered air with extra ozone (NF+, accumulated daylight AOT40 of 27.3 l l-1 h) and non-filtered air with additional extra ozone (NF++, accumulated daylight AOT40 of 120 l l-1 h). The birch saplings, including the roots, were harvested after the first and second growing seasons. After the first growing season, the NF++ treatment reduced the total wood biomass by 22%, relative to the NF treatment. There was no further reduction of the total wood biomass in the NF++ treatment after the second growing season. The root biomass was reduced by 30% after the first growing season. The shoot/root ratio, as well as the proportional biomass of leaves, were increased by ozone during both years. The ozone impact on the relative growth rate was estimated to -2% per 10 l l-1 h daylight AOT40 per growing season.