High chrome exhaustion in a non-float tanning process using a sulphonic aromatic acid

Tanning processes performed in drums consume large amounts of water and chemicals, most of which end up in the wastewater. This study explores an alternative approach at an industrial scale to the traditional pickle-chrome tanning method. The new method replaces formic and sulphuric acids with sulphonic aromatic acid. Because it is done without float, there is a sizeable reduction in the amount of added salt and chrome salt as well as an increase in temperatures at the end of the tanning process. From an environmental perspective, the new method offers important advantages. For instance, there is no float addition in the tannage. Also, there are reductions of 94% and 99%, respectively, in the discharge of chlorides and chrome, as well as a 75% reduction in the residual float. Our financial assessment demonstrated that the new method is 42% cheaper than a traditional approach.     

Influence of Technological Process on Biodegradation of PVA/Waxy Starch Blends in an Aerobic and Anaerobic Environment

Improving biodegradability of PVA/starch blends is a reality already documented by a number of works. Admittedly, mechanical properties of products (for example, tensile strength) are somewhat worse, but suitable composition optimizing or chemical modifying of starch may eliminate the problem to a large degree. This work is an attempt to find another potential effect influencing biodegradability, that of technological procedure for producing films from these blends on an extruder. The procedure with a so-called pre-extrusion step (two-stage) and dry-blend (single-stage) produced blends of slightest differences in achieved biodegradability (virtually within limits of experimental error) in aerobic (76 vs. 79%) as well as anaerobic breakdown (48 vs. 52%). Conversely, morphological analysis exhibited superior homogeneity of films prepared by the two-stage process; their tensile strength was also higher.     

Simultaneous quantification of Bi(III) and U(VI) in environmental water samples with a complicated matrix containing organic compounds

Trace amounts of bismuth(III) and uranium(VI) can be simultaneously determined in a single scan by adsorptive cathodic stripping voltammetry in the presence of cupferron as a complexing agent. Optimal conditions were found to be: 0.1 mol?L^?1 acetate buffer (pH 5.3), 5?×?10^?5?mol?L^?1 cupferron, accumulation potential of ?0.25 V, and accumulation time of 30 s. The linear range of Bi(III) and U(VI) was observed over the concentration range from 2?×?10^?9 to 2?×?10^?7?mol?L^?1 and from 1?×?10^?8 to 5?×?10^?7?mol?L^?1, respectively. The influence of the main components of real water samples such as foreign ions and organic substances (surface active substances, humic substances) was precisely investigated. The method was applied to the simultaneous measurements of bismuth and uranium in natural water samples.     

Novel Tough Crystalline Blends of Polylactide with Ethylene Glycol Derivative of POSS

Blending of polylactide (PLA) with low stereoregularity and polyhedral oligomeric silsesquioxane grafted with arms of poly(ethylene glycol) methyl ether, acting as a plasticizer, allowed us previously to obtain a novel stable elastomeric-like material. The present contribution focuses on the properties of semi-crystalline PLA plasticized with this compound. Melt blends of PLA with 5–15 wt% of the plasticizer, were compression molded, quenched and annealed, which enabled cold-crystallization. The glass transition temperature of the blends and their drawability depended on their crystallinity and plasticizer content. The best ductility was reached at the plasticizer content of 15 wt%; the achieved strain at break was 6.5 (650%) and 1.3 (130%), for the quenched and annealed material, respectively. The latter value exceeded 20 times the strain at break of neat crystalline PLA. The tensile toughness of the annealed 15 wt% blend was 12 times larger than that of crystalline PLA. Moreover, annealing of 15 wt% blend improved its yield strength by 40%. Despite the two peaks of the loss modulus, indicating the two glass transitions in this blend, no heterogeneities were found by scanning electron microscopy, indicating that the plasticizer enriched phase formed instead of distinct inclusions of the plasticizer.     

Utilization of Industrial Wastes from Mining and Packaging Industries in Wood-Plastic Composites

The manufacturing industry produces a lot of different by-products and waste. In this research, the utilization of different industrial wastes as a part of wood-plastic composites was tested. Limestone waste and carton cutting waste were tested by replacing part of the reinforcing fibers of the composite with these materials. The materials were made with the extrusion process, and they were tested for their mechanical properties, water absorption and thickness swelling. The materials were also viewed with a scanning electron microscope. The results showed that both industrial wastes affected the properties of the composite. Mining waste in the composite improved the moisture properties, impact strength and hardness of the material. Carton cutting waste improved the impact strength remarkably.     

Validation of the Polish version of the World Health Organization Disability Assessment Schedule (WHODAS 2.0) in an elderly population (60–70 years old)

Purpose. To assess the reliability and validity of the Polish version of the 36-point World Health Organization Disability Assessment Schedule (WHODAS 2.0) in an elderly population. Method. One thousand randomly selected individuals, aged 60–70 years, living in south-eastern Poland were assessed using the Polish version of the WHODAS 2.0. Results. The analysis confirmed the high reliability and validity of the tool. Cronbach’s α index was 0.89. The tool had high stability, and the correlation between test and retest results was high. The relevance of the domain selection was high or very high. A factor analysis confirmed the relevance of assigning questions to domains. High theoretical relevance was also demonstrated. Statistically significant differences between those who were and were not suffering from health problems were observed. An analysis of the internal structure of the WHODAS 2.0 revealed strong correlations between the components of each domain and the final result. Conclusion. The Polish version of the WHODAS 2.0 showed high reliability and validity; thus, it can be used to assess health, functioning and disability in the elderly population of Poland.     

The quest for environmental justice in China: citizen participation and the rural–urban network against Panguanying’s waste incinerator

Environmental distribution conflicts (EDCs) related to the construction and operation of waste incinerators have become commonplace in China. This article presents a detailed case study of citizen opposition to an incinerator in the village of Panguanying, Hebei Province. Drawing on in-depth fieldwork, we show how this case was notable, because it transcended the local arena to raise bigger questions about environmental justice, particularly in relation to public participation in siting decisions, after villagers exposed fraudulent public consultation in the environmental impact assessment. An informal network between villagers and urban environmental activists formed, enabling the Panguanying case to exert influence far beyond the village locality. This network was critical in creating wider public debate about uneven power and substandard public participation in siting disputes, a central feature in many Chinese EDCs. By transcending local specificities and exposing broader, systemic inadequacies, this case became instrumental in supporting “strong sustainability”.