基于地形位置指数的赤水河流域植被时空变化研究

地形因子和植被覆盖是区域灾害评价的关键指标,也是山区型村镇建设生态安全评估的重要内容.为探析山区型村镇建设的生态约束条件,以赤水河流域为研究对象,基于1998—2018年SPOT_VGT NDVI数据,利用地形位置指数（Topographic Position Index,TPI）和坡度位置指数方法,研究了赤水河流域植被生长季NDVI时空变化及地形分异特征.结果表明:①赤水河流域内,1998—2018年植被生长季平均NDVI呈缓慢上升趋势,斜率为0.004 7;NDVI>0.60的集中连片区域主要分布在古蔺县北部、赤水市大部和习水县西北部,占赤水河流域总面积的8.42%;Sen's slope在0.009~0.015区间时,赤水河流域植被生长增强趋势最明显,主要集中分布在赤水河中上游、二道河以及下游的大同河干流地区.②TPI在-39.4~34.3区间的面积最多,为6 221.63 km2,占赤水河流域总面积的34.05%;将赤水河流域坡度类型划分为山脊、上坡、中坡、平坡、下坡、山谷6个坡度位置类型,其中,中坡面积（7 792.02 km2）最大,占流域总面积的42.64%,表明TPI数值较小且坡度大于5°的区域是赤水河流域地形主体.③赤水河流域植被在山脊的平均NDVI最高,为0.747,且山脊平均Sen's slope最高,为0.007 2;山谷平均NDVI最低,为0.709.研究显示,赤水河流域植被分布在118.5~486.9的TPI区间或分布在山脊处时整体生长较好,且生长增强趋势最明显.      

秸秆还田方式对东北农田土壤NH3挥发和N2O排放的影响

秸秆还田是有效利用资源、增加土壤有机质含量和培肥地力的有效措施,但也会影响土壤NH₃挥发和N₂O的排放.探索不同秸秆还田方式对NH₃挥发和N₂O排放的影响对于减少土壤氮素损失和保护生态环境具有重要意义.采用田间小区试验,利用Los Gatos Research（LGR）超便携NH₃分析仪和密闭式静态箱-气相色谱法探究不同秸秆还田方式下土壤NH₃挥发和N₂O排放的特征,试验设4个处理（覆盖还田,即表面覆盖玉米秸秆,0~20和20~40 cm土壤分层扰动后填回,记为JG0-0;常规还田,即秸秆与0~20 cm土壤混合,20~40 cm土壤扰动后填回,记为JG0-20;深还田,秸秆与20~40 cm土壤混合,0~20 cm土壤挖出后填回,记为JG20-40;对照处理,即无玉米秸秆还田,0~20和20~40 cm土壤分层扰动后填回,记为CK）.结果表明:①相比于CK,不同秸秆还田方式均显著降低了土壤NH₃挥发量,增加了土壤N₂O排放量.与CK相比,JG0-0、JG0-20和JG20-40处理下土壤NH₃累积排放量分别减少了12.38%、9.87%和5.73%;土壤N₂O累积排放量分别增加了30.19%、82.82%和36.53%,其中JG0-0和JG20-40处理之间无显著性差异.②JG20-40处理下玉米产量显著高于其他处理,比CK增加了23.15%,JG0-0处理下玉米产量高于CK和JG0-20处理,但并未达到显著水平.③对于NH₃和N₂O这两种气体的总累积排放量,各处理间均达到显著性差异.与CK相比,JG0-0、JG0-20和JG20-40处理下NH₃和N₂O总累积排放量分别增加了16.67%、52.08%和22.92%.④不同秸秆还田方式下的氮素气态损失率均高于CK,JG0-0、JG0-20和JG20-40处理下氮素气态损失率分别比CK增加了17.50%、52.50%和22.50%.因此,综合考虑土壤NH₃挥发量、N₂O排放量和玉米产量等因素,JG0-0处理优于JG20-40、JG0-20处理.      

Direct capture of carbon dioxide from air via lime-based sorbents

Mitigation and Adaptation Strategies for Global Change - Direct air capture (DAC) is a developing technology for removing carbon dioxide (CO2) from the atmosphere or from low-CO2-containing...     

沈阳市农村生活污水处理设施有机废弃物归趋

采用实地观察法、文献调查法对沈阳市农村生活污水处理设施基本状况进行研究分析。结果显示:沈阳市已建成农村生活污水处理设施297处,有机废弃物产生量(干重)约为:剩余污泥637 t/a、湿地植物废弃物169 t/a。     

约束条件下中国循环经济发展中的生态效率——基于优化的超效率SBM-Malmquist-Tobit模型

以中国30个省份、直辖市、自治区的年度面板数据为研究对象,重点将生态资源存量和环境污染造成的经济浪费两项指标纳入新的生态效率评价体系,运用优化的引入非期望产出的超效率SBM模型测算生态效率,再运用Malmquist指数考察全要素生产率（TFP）与生态效率的动态变动关系,最后运用Tobit回归分析探索生态效率主要影响因素的方向、强度和变化趋势,以此度量和展现循环经济发展的整体情况.结果显示：生态效率呈现由东到西、由沿海到内陆逐渐收敛的格局,东部沿海地区和中部、西部内陆地区间,循环经济发展水平存在显著的阶梯式区域失衡;生态效率的集群效应明显,辐射效应不足,不同地区或同一地区的不同省份间,循环经济发展水平同样参差不齐;经济发展引发的生态赤字问题逐步缓解,但在短时间内经济和生态的矛盾依旧存在,西北地区尤为突显;第三产业比重、技术进步、市场开放对生态效率的提升具有积极作用且趋于强化;政府规制、人口密度对生态效率的提升也具有积极作用但趋于减弱;第二产业比重、能源结构对生态效率的改善存在负面影响亦趋于强化.     

基于静止卫星GOCI传感器的大气污染过程AOD监测

针对北京及周边地区2017年11月2~8日的一次污染过程,利用韩国静止卫星COMs1GOCI数据,对北京地区进行AOD监测.AOD反演采用时间序列迭代算法,根据地表反射率随时间慢变而大气气溶胶随时间快变的理论,采取最小值拟合的方式,获取气溶胶光学厚度数据.反演结果与地基AERONET监测结果具有很好的一致性,两者的相关系数R²大于0.89.AOD监测结果表明,GOCI传感器1次/h的监测频率,可以很好地展现北京地区大气污染过程的开始,发展及消散过程,可以展示出一天之内AOD的变化,为大气污染监测以及气候变化研究提供依据.     

玻璃纤维-铝合金层合板氙灯老化性能研究

目的研究氙灯环境对玻璃纤维-铝合金层合板性能的影响。方法通过研究玻璃纤维-铝合金层合板在氙灯老化后的力学性能、基体红外光谱、铝合金表面形貌及元素变化,分析层合板的氙灯老化机理。结果随氙灯老化时间的延长,树脂基体老化降解程度越高,树脂与纤维、铝合金的界面强度下降,使材料拉伸及弯曲性能降低,拉伸强度受老化影响最为显著的是正交结构层合板,老化84 d后强度降低13.7%,正交结构0°方向层合板的弯曲强度受氙灯老化影响降低4.6%,其他试样的弯曲强度降幅均低于5%,氙灯老化后的铝合金层表面的微凹坑数量及尺寸无明显变化,但凹坑氧元素随老化周期延长略微增加。结论氙灯环境主要影响玻璃纤维-铝合金层合板中的复合材料层及各界面,树脂基体的降解导致力学性能的衰退,而对于铝合金的影响并不明显。     

The influence of metallurgy on the formation of welding aerosols

Recent research has indicated that insoluble ultrafine aerosols (ie., particles whose physical diameters are less than 100 nm) may cause adverse health effects due to their small size, and that toxicological response may be more appropriately represented by particle number or particle surface area. Unfortunately, current exposure criteria and the associated air-sampling techniques are primarily mass-based. Welding processes are high-temperature operations that generate substantial number concentrations of ultrafine aerosols. Welding aerosols are formed primarily through the nucleation of metal vapors followed by competing growth mechanisms such as coagulation and condensation. Experimental results and mathematical tools are presented to illustrate how welding metallurgy influences the chemical aspects and dynamic processes that initiate and evolve the resultant aerosol. This research suggests that a fundamental understanding of metallurgy and aerosol physics can be exploited to suppress the formation of undesirable chemical species as well as the amount of aerosol generated during a welding process.     

Total versus inhalable sampler comparison study for the determination of asphalt fume exposures within the road paving industry

Exposure to asphalt fumes has a threshold limit value (TLV of 0.5 mg m(-3) (benzene extractable inhalable particulate) as recommended by the American Conference of Governmental Industrial Hygienists (ACGIH). This reflects a recent change (2000) whereby two variables are different from the previous recommendation. First is a 10-fold reduction in quantity from 5 mg m(-3) to 0.5 mg m(-3). Secondly, the new TLV specifies the "inhalable" fraction as compared to what is presumed to be total particulate. To assess the impact of these changes, this study compares the differences between measurements of paving asphalt fume exposure in the field using an "inhalable" instrument versus the historically used 'total' sampler. Particle size is also examined to assist in the understanding of the aerodynamic collection differences as related to asphalt fumes and confounders. Results show that when exposures are limited to asphalt fumes, a 1:1 relationship exists between samplers, showing no statistically significant differences in benzene soluble matter (BSM). This means that for the asphalt fume ACGIH TLV, the 'total' 37-mm sampler is an equivalent method to the "inhalable" method, referred to as IOM (Institute of Occupational Medicine), and should be acceptable for use against the TLV. However, the study found that when confounders (dust or old asphalt millings) are present in the workplace, there can be significant differences between the two samplers' reported exposure. The ratio of IOM/Total was 1.37 for milling asphalt sites, 1.41 for asphalt paving over granular base, and 1.02 for asphalt over asphalt pavements.