Ancillary benefits of reduced air pollution in the US from moderate greenhouse gas mitigation policies in the electricity sector

Actions to slow atmospheric accumulation of greenhouse gases also would reduce conventional air pollutants yielding “ancillary” benefits that tend to accrue locally and in the near-term. Using a detailed electricity model linked to an integrated assessment framework to value changes in human health, we find a tax of $25 per metric ton of carbon emissions would yield NO_x-related health benefits of about $8 per metric ton of carbon reduced in the year 2010 (1997 dollars). Additional savings of $4–$7 accrue from reduced investment in NO_x and SO₂ abatement in order to comply with emission caps. Total ancillary benefits of a $25 carbon tax are $12–$14, which appear to justify the costs of a $25 tax, although marginal benefits are less than marginal costs. At a tax of $75, greater total benefits are achieved but the value per ton of carbon reductions remains roughly constant at about $12.     

Photo-assisted fenton oxidation of refractory organics in UASB-pretreated leachate

Nearly 91% of organic pollutants in Hong Kong leachate could be effectively removed by the UASB(upflow anaerobic sludge blanket)process followed by the fenton coagulation.The COD(chemical oxygen demand)of leachate was lowered from an average of 5620 mg/L to 1910 mg/L after the UASB treatment at 37℃,and was further lowered to 513 mg/L after fenton coagulation.The remaining refractory residues could be further removed by plotochemical oxidation with the addition of H2O2.The BOD/COD ratio was greatly increased from 0.062 to 0.142,indicating the biodegradability of organic residues was improved.The photochemical oxidation for the fenton-coagulation supernatant was most effective at pH3-4,with the addition of 800 mg/L of H2O2,and UV radiation time of 30 minutes.The final effluent contained only 148 mg/L of COD,21 mg/L of BOD(biochemical oxygen demand)and 56 mg/L of TOC (total organic carbon).     

Partitioning gas tracer tests for measurement of water in municipal solid waste

A key component in the operation of almost all bioreactor landfills is the addition of water to maintain optimal moisture conditions. To determine how much water is needed and where to add it, in situ methods are required to measure water within solid waste. Existing technologies often result in measurements of unknown accuracy, because of the variability of solid waste materials and time-dependent changes in packing density, both of which influence most measurement methods. To overcome these problems, a new technology recently developed by hydrologists for measuring water in the vadose zone--the partitioning gas tracer test--was tested. In this technology, the transport behavior of two gas tracers within solid waste is used to measure the fraction of the void space filled with water. One tracer is conservative and does not react with solids or liquids, while a second tracer partitions into the water and is separated from the conservative tracer during transport. This technology was tested in four different solid waste packings and was capable of determining the volumetric water content to within 48% of actual values, with most measurement errors less than 15%. This technology and the factors that affect its applicability to landfills are discussed in this paper.     

Use of spent mushroom compost to bioremediate PAH-contaminated samples

Spent mushroom compost (SMC) is a bulky waste byproduct of mushroom industry and produced abundantly. The SMC of Pleurotus pulmonarius immobilized laccase (0.88 mmoles min(-1) g(-1)) and manganese peroxidase (0.58 mmoles min(-1) g(-1)) of which the optimal temperatures were 45 and 75 degrees C, respectively. In laboratory test, complete degradative removal of individual naphthalene, phenanthrene, benzo[a]pyrene and benzo[g,h,i]perylene (200 mg PAH kg(-1) sandy-loam soil) by 5% SMC was obtained in two days under continuous shaking at 80 degrees C. The SMC-treated PAH samples had significantly reduced or removed their toxicities as revealed by the Microtox bioassay. These results were confirmed by gas chromatography-mass spectrometry analysis on the breakdown products. A phthalic derivative which is reported as a degradative product of PAHs by ozonation or ligninolysis was also detected in the SMC-treated samples. The results demonstrate the potential in employing SMC in ex situ bioremediation.     

An extended self-organizing map network for modeling and control of pulse jet fabric filters

Pulse jet fabric filters (PJFFs) have become an attractive option of particulate collection utilities, because they can meet stringent particulate emission limits regardless of variation in operating conditions. Despite their wide applications, the present control algorithm for PJFFs can best be described as rudimentary. In this paper, a modeling and control strategy based on the local model network (LMN) is proposed. An extended self-organizing map (ESOM) network is developed to construct the LMN model of the filtration process using the filter's input-output data. Subsequently, these ESOM local models are incorporated into the design of local generalized predictive controllers (GPC), and the proposed controller design is obtained as the weighted sum of these local controllers. Simulation results show that the proposed controller design yields a better performance than both conventional GPC and proportional plus integral (PI) controllers yield.     

Decomposition of 2-mercaptothiazoline in aqueous solution by ozonation

This study investigates the ozonation of 2-mercaptothiazoline (2-MT). The 2-MT is one of the important organic additives for the electroplating solution of the printed wiring board industry and has been widely used as a corrosion inhibitor in many industrial processes. It is of concern for the aquatic pollution control especially in the wastewaters. Semibatch ozonation experiments in the completely stirred tank reactor are performed under various concentrations of input ozone. The concentrations of 2-MT, sulfate, and ammonium are analyzed at specified time intervals to elucidate the decomposition of 2-MT during the ozonation. In addition, the time variation of the dissolved ozone concentration (C(ALb)) is continuously monitored in the course of experiments. Total organic carbon (TOC) is chosen and measured as a mineralization index of the ozonation of 2-MT. The results indicate that the decomposition of 2-MT is efficient, while the mineralization of TOC is limited via the ozonation only. Simultaneously, the yield of sulfate with the maximum value of about 47% is characterized by the increases of TOC removal and ozone consumption. These results can provide some useful information for assessing the feasibility of the treatment of 2-MT in the aqueous solution by the ozonation.     

Removal of biocide pentachlorophenol in water system by the spent mushroom compost of Pleurotus pulmonarius

Pentachlorophenol (PCP) has been widely used as a wood preservative since 1980s. Although it has been banned worldwide, residues of PCP are still commonly found. The spent compost of oyster mushroom Pleurotus pulmonarius (SMC) which was a degraded paddy straw-based substrate, contained 25% chitin. Five percentage of the SMC could remove 89.0 +/- 0.4% of 100 mg PCPl(-1) within 2 days at room temperature predominantly by biodegradation. The maximum removal capacity was 15.5 +/- 1.0 mg g(-1) SMC. The sorption kinetics of PCP by SMC can be described by the Freundlich monolayer model with a theoretical sorption capacity similar to that found for chitin. A PCP-degradative bacterium was isolated from the SMC. Yet, biodegradation was predominantly contributed by the immobilized ligninolytic enzymes secreted by the mushroom to the SMC. Degradation of PCP involves dechlorination, methylation, carboxylation and ring cleavage as verified by GC-MSD and ion chromatography. Thus, the SMC has a potential for treating PCP-contaminated water.