Sorption-desorption behavior of metsulfuron-methyl and sulfosulfuron in soils

Sorption of metsulfuron-methyl and sulfosulfuron were studied in five Indian soils using batch sorption method. Freundlich adsorption equation described the sorption of herbicides with K_f (adsorption coefficient) values ranging between 0.21 and 1.88 (metsulfuron-methyl) and 0.37 and 1.17 (sulfosulfuron). Adsorption isotherms were L-type suggesting that the herbicides sorption decreased with increase in the initial concentration of the herbicide in the solution. The K_f for metsulfuron-methyl showed good positive correlation with silt content (significant at p = 0.01) and strong negative correlation with the soil pH (significant at p = 0.05) while sorption of sulfosulfuron did not correlate with any of the soil parameter. Desorption of herbicides was concentration dependent and, in general, sulfosulfuron showed higher desorption than the metsulfuron-methyl. The study indicates that these herbicides are poorly sorbed in the Indian soil types and there may be a possibility of their leaching to lower soil profiles.     

Quantitative determination of gibberellins by high performance liquid chromatography from various gibberellins producing Fusarium strains

High performance liquid chromatographic (HPLC) method was developed for analysis of seven gibberellins, i.e., GA₃, GA₄, GA₇, GA₃ methyl ester, GA₇ methyl ester 3,13 diacetate, GA₇ methyl ester, and fusaric acid, using an isocratic system. Method was used for estimation of gibberellins from different Fusarium strains. Gibberellins were extracted from 28 strains of Fusarium, out of which six strains of Fusarium were isolated from soil of different parts of India and 22 strains were procured from the Indian Type Culture Collection, Indian Agricultural Research Institute, New Delhi. Extracts were analyzed for qualitative and quantitative estimation of gibberellins by thin layer chromatography and HPLC, respectively. On the basis of quantitative analysis of produced gibberellins by HPLC, they were categorized as low, moderate, and high gibberellin producing strain. For the first time, Fusarium solani was also reported as high GA₃ producing strain.     

Modeling of Ecological Footprint and Climate Change Impacts on Food Security of the Hill Tracts of Chittagong in Bangladesh

This paper presents an integrated and dynamic model for the management of the uplands of the Hill Tracts of Chittagong to predict food security and environmental loading for gradual transition of shifting agriculture land into horticulture crops and teak plantation, and crop land into tobacco cultivation. Food security status for gradual transmission of shifting agriculture land into horticulture crops and teak plantation, and crop land into tobacco cultivation is the best option for food security, but this causes the highest environmental loading resulting from tobacco cultivation. Considering both food security and environmental degradation in terms of ecological footprint, the best option is gradual transition of shifting agriculture land into horticulture crops which provides moderate increase in the food security with a relatively lower environmental degradation in terms of ecological footprint. Crop growth model InfoCrop was used to predict the climate change impacts on rice and maize production in the uplands of the Hill Tracts of Chittagong. Climate change impacts on the yields of rice and maize of three treatments of temperature, carbon dioxide and rainfall change (+0 °C, +0 ppm and +0 % rainfall), (+2 °C, +50 ppm and 20 % rainfall) and (+2 °C, +100 ppm and 30 % rainfall) were assessed. The yield of rice decreases for treatment 2, but it increases for treatment 3. The yield of maize increases for treatments 2 and 3 since maize is a C₄ plant. There is almost no change in food security at upazila (sub-district) level for the historical climate change scenario, but there is small change in the food security at upazila levels for IPCC climate change scenario.     

Contribution to closing the loop on waste materials: valorization of bottom ash from waste-to-energy plants under a life cycle approach

Incineration has undergone several technology improvements, reducing air emissions and increasing the efficiency of energy and material recovery; however, there is still a long way to go. To analyze the environmental impacts of waste incineration, this study assessed 15 waste fractions that compose municipal waste in Spain, which are grouped as non-inert materials (plastics, paper, cardboard and organic matter), unburned materials (glass and Al) and ferrous materials. Additionally, this paper evaluates the valorization of bottom ash (BA) to produce steel, aluminum and cement in these recycled/recoverable waste fractions. The results depend on the input waste composition and the heating value (HHV) and showed that ferrous and unburned materials had the worst environmental performance due to the null HHV. The valorization of BA in steel, Al and cement production significantly reduced the environmental impact and the consumption of resources. BA recycling for secondary steel and Al production would improve the environmental performance of the combustion of unburned materials and ferrous materials, whereas the use of BA in cement production diminished the consumption of NR for non-inert materials. This is of great interest for organic matter and PC, waste with a low energy production and high heavy metal and sulfur content.     

Female CEO succession and corporate social disclosure in China: unveiling the significance of ownership status and firm performance

Environmental Science and Pollution Research - This study intends to examine the effect of CEO succession with gender change from male to female (i.e., female CEO succession) on corporate social...     

Monitoring of heavy metal partitioning in reef corals of Lakshadweep Archipelago, Indian Ocean

This paper focuses on the partitioning of trace metals in five selected coral species from Lakshadweep Archipelago, which remains as one of the least studied areas in the Indian Ocean. Based on the morphological features, selected coral species are classified as massive (Porites andrewsi), ramose or branching (Lobophyllia corymbosa, Acropora formosa and Psammocora contigua) and foliaceous (Montipora digitata). Relating trace metal concentrations with morphological features in skeleton, highest concentrations of all the trace metals (except Zn) were reported for the ramose type corals. In tissue, all the metals (essential as well as non essential) showed highest concentrations within the branching type corals. Irrespective of their growth characteristics/pattern, all species except P. contigua displayed higher concentrations of Pb, Ni, Mn and Cd within their skeleton compared to tissue which may exemplify a regulatory mechanism to avoid the build up of the concentrations of these metals in their bio-part, strikingly toxic metals like Cd and Pb. The concentrations of trace metals in the skeleton and tissues of these coral species were subjected to 3 way ANOVA based on non standardized original data and the results showed significant differences between metals and between species leading to high skeleton/ tissue - species interaction as well as skeleton/tissue - metal interaction. The significant values of student's t calculated are depicted in the form of Trellis diagrams.     

Endogenous regulation of night-time water relations in hybrid aspen grown at ambient and elevated air humidity

Regional Environmental Change - Although night-time water relations have been studied in different plant species in the last decade, there is limited information about the impact of climate...     

Biodegradable Chitosan-g-Poly(methacrylamide) Microspheres for Controlled Release of Hypertensive Drug

Chitosan-g-poly(methacrylamide) (CS-g-PMAAm) was synthesized by redox polymerization. The synthesized graft copolymers were used to prepare microspheres (MS) by water/oil (W/O) emulsion technique and cross-linked with glutaraldehyde (GA). Developed microspheres were encapsulated using enalapril maleate (ENAM) as a model drug (hypertension) and characterized by fourier transform infrared spectroscopy, differential scanning calorimetry and scanning electron microscopy. The physico-chemical properties of the microspheres were studied by calculating drug entrapment efficiency, and drug release kinetics. % of encapsulation efficiency (% EE) increased with increase in drug loading and methacrylamide (MAAm) content. The minimum % EE (65.2 ± 1.6) was observed in case of microsphere containing 40 % MAAm, 5 % ENAM and 10 mL glutaraldehyde. The release profiles indicate that formulation containing highest (10 mL) crosslinking agent microspheres has the slow release.     

Fluxes of methane,carbon dioxide and nitrous oxide in boreal lakes and potential anthropogenic effects on the aquatic greenhouse gas emissions

We have examined how some major catchment disturbances may affect the aquatic greenhouse gas fluxes in the boreal zone, using gas flux data from studies made in 1994-1999 in the pelagic regions of seven lakes and two reservoirs in Finland. The highest pelagic seasonal average methane (CH(4)) emissions were up to 12 mmol x m(-2) x d(-1) from eutrophied lakes with agricultural catchments. Nutrient loading increases autochthonous primary production in lakes, promoting oxygen consumption and anaerobic decomposition in the sediments and this can lead to increased CH(4) release from lakes to the atmosphere. The carbon dioxide (CO(2)) fluxes were higher from reservoirs and lakes whose catchment areas were rich in peatlands or managed forests, and from eutrophied lakes in comparison to oligotrophic and mesotrophic sites. However, all these sites were net sources of CO(2) to the atmosphere. The pelagic CH(4) emissions were generally lower than those from the littoral zone. The fluxes of nitrous oxide (N(2)O) were negligible in the pelagic regions, apparently due to low nitrate inputs and/or low nitrification activity. However, the littoral zone, acting as a buffer for leached nitrogen, did release N(2)O. Anthropogenic disturbances of boreal lakes, such as increasing eutrophication, can change the aquatic greenhouse gas balance, but also the gas exchange in the littoral zone should be included in any assessment of the overall effect. It seems that autochthonous and allochthonous carbon sources, which contribute to the CH(4) and CO(2) production in lakes, also have importance in the greenhouse gas emissions from reservoirs.     

Transport and fate of dieldrin in poplar and willow trees analyzed by SPME

Dieldrin is a hydrophobic organochlorine insecticide that is persistent in the environment. The fate and transport of dieldrin in trees is important both in the context of potential remediation, as well as food chain impacts through dieldrin transport to shoots and leaves. Experiments were conducted to measure the degree of dieldrin partitioning to plant tissue and the potential for biodegradation of dieldrin in the microbe rich tree rhizosphere. Dieldrin was analyzed in water and plant tissue using headspace solid-phase microextraction (SPME) coupled with gas chromatography. Poplar and willow saplings planted in soil and watered with 10 microgl(-1) dieldrin for up to 9 months showed no adverse effects due to dieldrin exposure and no dieldrin was observed in plant shoots with a method detection limit (MDL) of 7 ngg(-1). One-week hydroponic tests of poplar saplings exposed to aqueous dieldrin also showed no detection of dieldrin in shoots, with an average of 66% of the dieldrin partitioned to the plant roots and an overall mass balance recovery of 76% in the plant-water system. The root concentration factor (RCF) was found to be 30+/-3 ml water g(-1) root. Biodegradation of dieldrin was not observed in an aqueous batch bioreactor containing 8 microgl(-1) dieldrin, nutrients and bacteria from the root zone of a poplar sapling that had been exposed to dieldrin for 9 months. These results show that planting trees is likely to be safe and potentially useful at sites containing low-levels of dieldrin in groundwater.