Biosurfactant electrospun nanofibers exhibit minimal side effects on the structure and function of the liver tissue in male rat model

Environmental Science and Pollution Research - Oil spills can result in significant damage to marine estuaries, rivers, lakes, wetlands, and shorelines. Electrospun nanofibers containing...     

Effect of dietary phytogenics (herbal mixture) supplementation on growth performance,nutrient utilization,antioxidative properties,and immune response in broilers

Environmental Science and Pollution Research - This experiment was conducted to study that effect of a phytogenics (herbal mixture) supplementation as alternative to antibiotics on the growth...     

An extensive review on restoration technologies for mining tailings

Development of mineral resources and the increasing mining waste emissions have created a series of environmental and health-related issues. Nowadays, the ecological restoration of mining tailings has become one of the urgent tasks for mine workers and environmental engineers all over the world. Aim of the present paper is to highlight the previous restoration techniques and the challenges encountered during the restoration of mine tailings. As it is a common practice that, before restoring of tailings, the site should be evaluated carefully. Studies showed that the mine tailings’ adverse properties, including excessive heavy metal concentration, acidification, improper pH value, salinization and alkalization, poor physical structure and inadequate nutrition, etc., are the major challenges of their restoration. Generally, four restoration technologies, including physical, chemical, phytoremediation, and bioremediation, are used to restore the mining tailings. The working mechanism, advantages, and disadvantages of these techniques are described in detail. In addition, selection of the suitable restoration techniques can largely be carried out by considering both the economic factors and time required. Furthermore, the ecosystem restoration is perceived to be a more promising technology for mine tailings. Therefore, this extensive review can act as a valuable reference for the researchers involved in mine tailing restoration.     

Experimental investigation of dust pollutants and the impact of environmental parameters on PV performance: an experimental study

The accumulation of dust pollution on the photovoltaic (PV) module can have a significant effect on the productivity and efficiency of PV systems in different locations in the world. Dust which accumulated over time on the PV module and is based on weather conditions led to the reduction in the effectiveness of solar cells. The aim of this research was to experimentally investigate the effect of the natural dust and the effects of environmental parameters on PV performance. The experiments were conducted to propose a model for the current, voltage, power and efficiency and to simulate the effect of environmental parameters on PV performance. The natural dust investigated consisted of different compounds: SiO₂ (45.53 %), CaO (24.62 %), Al₂O₃ (10.83 %), Fe₂O₃ (10.46 %), MgO (6.33 %), K₂O (0.87 %), TiO₂ (0.45 %), SO₃ (0.24 %), MnO₂ (0.21), Cr₂O₃ (0.23 %), SrO (0.13 %) and NiO (0.09 %). It was found that the most accurate correlation is a polynomial from seventh degree for current, voltage, power and efficiency, fourth degree for solar radiation and temperature, cubic degree for humidity and wind velocity. The coefficients of general model are 0.6343, 0.0110, 0.0 and 0.0001 for PV module, respectively, with 0.0011 fitting factor. The proposed model has been validated using models in the literature.     

Spatio-temporal analysis of climatic variables in the western part of Bangladesh

Monitoring and detecting trends of climatic variables like rainfall and temperature are essential for agricultural developments in the context of climate change. The present study has detected trends in annual and cropping seasonal rainfall and temperature data for the period of 1961–2011 using Mann–Kendall (MK) test, Spearman’s rho (SR) test and modified Mann–Kendall test that has been applied to the significant lag-1 serial correlated time series data, and slope has been estimated using Sen’s Slope estimator for twelve meteorological stations located in the western part of Bangladesh covering about 41 % of the country. Almost 71 % trends explored by MK test in annual rainfall are statistically insignificant, and SR test also complies it. The spatial distribution of rainfall trend shows insignificant positive trends in major part of the area. Significant positive trends both by MK test and by SR test at 95 % confidence levels are observed at rates of 8.56, 11.15 and 13.66 mm/year at Dinajpur, Rangpur and Khepupara stations, respectively, and the Kharif season rainfall of these stations also shows significant increasing trends except Dinajpur. On the other hand, significant decreasing trends in annual rainfall are found at Bhola (?11.67 mm/year) and Rajshahi (?5.951 mm/year) stations and decreasing trends in rainfall dominated the Pre-Kharif season over the area. But, 83.33 % of the stations show rising trends in annual mean temperature with significant positive trends (as observed by both MK test and SR test) at Rangpur, Bogra, Faridpur, Jessore and Bhola stations where the rate of changes vary from 0.013 °C/year at Faridpur to 0.08 °C/year at Bhola. Most of the trends in Rabi and Pre-Kharif seasons of mean temperatures are not statistically significant. However, all stations except Barisal show significant rising trends in temperature in Kharif season. To cope with this changing pattern of rainfall and temperature, effective adaptation strategies should be taken to keep up the agricultural production that is related to livelihood of the most people and to ensure the country’s food security.     

Atmospheric deposition of major and trace elements in Amman, Jordan

Wet and dry deposition samples were collected in the capital of Jordan, Amman. Concentrations of Al, Ba, Bi, Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sb, V, Zn, Fe, Sr, Mg²⁺, Ca²⁺, Na⁺, K⁺, Cl⁻, NO₃ ⁻ and SO₄ ²⁻, along with pH were determined in collected samples. Mean trace metal concentrations were similar or less than those reported for other urban regions worldwide, while concentrations of Ca²⁺ and SO₄ ²⁻ were among the highest. High Ca²⁺ concentrations were attributed to the calcareous nature of the local soil and to the influence of the Saharan dust. However, high SO₄ ²⁻ concentrations were attributed to the influence of both anthropogenic and natural sources. Except for Cl⁻, NO₃ ⁻, SO₄ ²⁻ and Cu, monthly dry deposition fluxes of all measured species were higher than wet deposition fluxes. The annual wet deposition fluxes of trace metals were much lower than those reported for other urban areas worldwide.     

Environmental and socio-economic impacts of pipe drainage in Pakistan

Many drainage schemes and salinity control projects have been executed world wide. Pipe drainage has widely been used in Pakistan, Egypt and India to control waterlogging. The impact of pipe drainage on land and water was evaluated in this paper using data of three pipe drainage projects in Pakistan namely Khushab Salinity Control and Reclamation Project, Fourth Drainage Project in Faisalabad and Swabi Salinity Control and Reclamation Project. Data by regular monitoring of these projects were collected. The effect of pipe drainage on water table depth at these three locations has been compared. Water quality and soil salinity improvement due to the pipe drainage has also been investigated. Data, related to water table depths and discharges from drain pipes/wells, was collected. Observation wells, installed at various places by the Water and Power Development Authority, were used for collection of this data. To evaluate the impact of the projects on salinity, soil samples from all the three locations were tested. A questionnaire was prepared to get the view of the people about the projects. It was revealed that in these areas, due to subsurface pipe drainage, the percentage of the abandoned land has been considerably decreased. Over drainage was observed in a few places of the projects. The farmers at such places were asked to change their cropping patterns. Ultimately, there has been an increase in area under cultivation, crop yields and cropping intensity in the projects’ area.     

Integrating geospatial and ground geophysical information as guidelines for groundwater potential zones in hard rock terrains of south India

The increasing demand of water has brought tremendous pressure on groundwater resources in the regions were groundwater is prime source of water. The objective of this study was to explore groundwater potential zones in Maheshwaram watershed of Andhra Pradesh, India with semi-arid climatic condition and hard rock granitic terrain. GIS-based modelling was used to integrate remote sensing and geophysical data to delineate groundwater potential zones. In the present study, Indian Remote Sensing RESOURCESAT-1, Linear Imaging Self-Scanner (LISS-4) digital data, ASTER digital elevation model and vertical electrical sounding data along with other data sets were analysed to generate various thematic maps, viz., geomorphology, land use/land cover, geology, lineament density, soil, drainage density, slope, aquifer resistivity and aquifer thickness. Based on this integrated approach, the groundwater availability in the watershed was classified into four categories, viz. very good, good, moderate and poor. The results reveal that the modelling assessment method proposed in this study is an effective tool for deciphering groundwater potential zones for proper planning and management of groundwater resources in diverse hydrogeological terrains.     

Influence of multi-industrial activities on trace metal contamination: an approach towards surface water body in the vicinity of Dhaka Export Processing Zone (DEPZ)

Industrial wastewater discharged into aquatic ecosystems either directly or because of inadequate treatment of process water can increase the concentrations of pollutants such as toxic metals and others, and subsequently deteriorate water quality, environmental ecology and human health in the Dhaka Export Processing Zone (DEPZ), the largest industrial belt of 6-EPZ in Bangladesh. Therefore, in order to monitor the contamination levels, this study collected water samples from composite effluent points inside DEPZ and the surrounding surface water body connected to effluent disposal sites and determined the environmental hazards by chemical analysis and statistical approach. The water samples were analysed by inductively coupled plasma mass spectrometry to determine 12 trace metals such as As, Ag, Cr, Co, Cu, Li, Ni, Pb, Se, Sr, V and Zn in order to assess the influence of multi-industrial activities on metal concentrations. The composite effluents and surface waters from lagoons were characterized by a strong colour and high concentrations of biochemical oxygen demand, chemical oxygen demand, electrical conductivity, pH, total alkalinity, total hardness, total organic carbon, Turb., Cl(-), total suspended solids and total dissolved solids, which were above the limit of Bangladesh industrial effluent standards, but dissolved oxygen concentration was lower than the standard value. The measurement of skewness and kurtosis values showed asymmetric and abnormal distribution of the elements in the respective phases. The mean trend of variation was found in a decreasing order: Zn > Cu > Sr > Pb > Ni > Cr > Li > Co > V > Se > As > Ag in composite industrial effluents and Zn > Cu > Sr > Pb > Ni > Cr > Li > V > As > Ag > Co > Se in surface waters near the DEPZ. The strong correlations between effluent and surface water metal contents indicate that industrial wastewaters discharged from DEPZ have a strong influence on the contamination of the surrounding water bodies by toxic metals. The average contamination factors were reported to be 0.70-96.57 and 2.85-1,462 for industrial effluents and surface waters, respectively. The results reveal that the surface water in the area is highly contaminated with very high concentrations of some heavy/toxic metals like Zn, Pb, Cu, Ni and Cr; their average contamination factors are 1,460, 860, 136, 74.71 and 4.9, respectively. The concentrations of the metals in effluent and surface water were much higher than the permissible limits for drinking water and the world average concentrations in surface water. Therefore, the discharged effluent and surface water may create health hazards especially for people working and living inside and in the surrounding area of DEPZ.