Investigating Jacaranda mimosifolia tree as biomonitor of atmospheric trace metals

Studies on the use of tree bark as biomonitors for environmental pollutants are still very scarce. We evaluated the reliability of using Jacaranda mimosifolia, a common tree in Tshwane City of South Africa, as a suitable biomonitor of atmospheric trace metals. Bark samples were collected from ten different locations during two sampling periods. The concentrations of the metals were determined by inductively coupled plasma mass spectrometry. The concentrations of the metals were 33.2–1,795 μg/g (Pb), 21.4–210 μg/g (Cu), 68.4–490 μg/g (Zn), 30.6–2,916 μg/g (Cr), 0.12–1.34 μg/g (Cd), and 6.04–68.0 μg/g (V), respectively. The differences obtained for the results from different sites were significant (p?< 0.05). A significant difference was also observed between the two sampling periods. The trace metals concentrations suggested that automobile emissions are a major source of these metals. The study also confirms the suitability of J. mimosifolia as a biomonitor of atmospheric deposition of these metals.     

Characterizing the forest fragmentation of Canada’s national parks

Characterizing the amount and configuration of forests can provide insights into habitat quality, biodiversity, and land use. The establishment of protected areas can be a mechanism for maintaining large, contiguous areas of forests, and the loss and fragmentation of forest habitat is a potential threat to Canada’s national park system. Using the Earth Observation for Sustainable Development of Forests (EOSD) land cover product (EOSD LC 2000), we characterize the circa 2000 forest patterns in 26 of Canada’s national parks and compare these to forest patterns in the ecological units surrounding these parks, referred to as the greater park ecosystem (GPE). Five landscape pattern metrics were analyzed: number of forest patches, mean forest patch size (hectare), standard deviation of forest patch size (hectare), mean forest patch perimeter-to-area ratio (meters per hectare), and edge density of forest patches (meters per hectare). An assumption is often made that forests within park boundaries are less fragmented than the surrounding GPE, as indicated by fewer forest patches, a larger mean forest patch size, less variability in forest patch size, a lower perimeter-to-area ratio, and lower forest edge density. Of the 26 national parks we analyzed, 58% had significantly fewer patches, 46% had a significantly larger mean forest patch size (23% were not significantly different), and 46% had a significantly smaller standard deviation of forest patch size (31% were not significantly different), relative to their GPEs. For forest patch perimeter-to-area ratio and forest edge density, equal proportions of parks had values that were significantly larger or smaller than their respective GPEs and no clear trend emerged. In summary, all the national parks we analyzed, with the exception of the Georgian Bay Islands, were found to be significantly different from their corresponding GPE for at least one of the five metrics assessed, and 50% of the 26 parks were significantly different from their respective GPEs for all of the metrics assessed. The EOSD LC 2000 provides a heretofore unavailable dataset for characterizing broad trends in forest fragmentation in Canada’s national parks and in their surrounding GPEs. The interpretation of forest fragmentation metrics must be guided by the underlying land cover context, as many forested ecosystems in Canada are naturally fragmented due to wetlands and topography. Furthermore, interpretation must also consider the management context, as some parks are designed to preserve fragmented habitats. An analysis of forest pattern such as that described herein provides a baseline, from which changes in fragmentation patterns over time could be monitored, enabled by earth observation data.     

Determination of some organochlorine pesticide residues in honeys from Konya, Turkey

In this study, 24 organochlorine pesticide residues in 109 different honey samples collected from stores and open markets in Konya, Turkey were analyzed by gas chromatography-electron capture detection. Aldrin, cis-chlordane, trans-chlordane, oxy-chlordane, 2,4^′ -DDE, and 4,4^′ -DDE were found in all honey samples. The mean value was 0.0540 μg g^???1 for oxy-chlordane. In the 55 samples of 109, levels of organochlorine pesticide residues of oxy-chlordane were determined as higher than those of Turkish Alimentarius Codex maximum residual limits (MRLs). Other organochlorine pesticide residues also exceeded MRLs except for cis-heptachlor epoxide and α-hexachlorocyclohexane. Since all of the honey samples are found contaminated and most of these samples exceeded MRLs, a control of organochlorine pesticide residues in honey is necessary for consumer health.     

Bacteria with dual resistance to elevated concentrations of heavy metals and antibiotics in Nigerian contaminated systems

Samples of soil, water, and sediments from industrial estates in Lagos were collected and analyzed for heavy metals and physicochemical composition. Bacteria that are resistant to elevated concentrations of metals (Cd^2?+?, Co^2?+?, Ni^2?+?, Cr^6?+?, and Hg^2?+?) were isolated from the samples, and they were further screened for antibiotic sensitivity. The minimum tolerance concentrations (MTCs) of the isolates with dual resistance to the metals were determined. The physicochemistry of all the samples indicated were heavily polluted. Twenty-two of the 270 bacterial strains isolated showed dual resistances to antibiotics and heavy metals. The MTCs of isolates to the metals were 14 mM for Cd^2?+?, 15 mM for Co^2?+? and Ni^2?+?, 17 mM for Cr^6?+?, and 10 mM for Hg^2?+?. Five strains (Pseudomonas aeruginosa, Actinomyces turicensis, Acinetobacter junni, Nocardia sp., and Micrococcus sp.) resisted all the 18 antibiotics tested. Whereas Rhodococcus sp. and Micrococcus sp. resisted 15 mM Ni^2?+?, P. aeruginosa resisted 10 mM Co^2?+?. To our knowledge, there has not been any report of bacterial strains resisting such high doses of metals coupled with wide range of antibiotics. Therefore, dual expressions of antibiotics and heavy-metal resistance make the isolates, potential seeds for decommissioning of sites polluted with industrial effluents rich in heavy metals, since the bacteria will be able to withstand in situ antibiosis that may prevail in such ecosystems.     

Valorization of post-consumer waste plastic in cementitious concrete composites

The sheer amount of disposable bottles being produced nowadays makes it imperative to identify alternative procedures for recycling them since they are non-biodegradable. This paper describes an innovative use of consumed plastic bottle waste as sand-substitution aggregate within composite materials for building application. Particularly, bottles made of polyethylene terephthalate (PET) have been used as partial and complete substitutes for sand in concrete composites. Various volume fractions of sand varying from 2% to 100% were substituted by the same volume of granulated plastic, and various sizes of PET aggregates were used. The bulk density and mechanical characteristics of the composites produced were evaluated. To study the relationship between mechanical properties and composite microstructure, scanning electron microscopy technique was employed. The results presented show that substituting sand at a level below 50% by volume with granulated PET, whose upper granular limit equals 5mm, affects neither the compressive strength nor the flexural strength of composites. This study demonstrates that plastic bottles shredded into small PET particles may be used successfully as sand-substitution aggregates in cementitious concrete composites. These new composites would appear to offer an attractive low-cost material with consistent properties; moreover, they would help in resolving some of the solid waste problems created by plastics production and in saving energy.     

Pyrolysis of mixtures of sewage sludge and manure: a comparison of the results obtained in the laboratory (semi-pilot) and in a pilot plant

A pilot-scale pyrolysis process was carried out for the treatment of a mixture of two types of waste, sewage sludge and cattle manure, comparing the results with others obtained under laboratory conditions (semi-pilot scale). The aim of this study was to obtain the energetic valorization of the products. Owing to the specific characteristics of the plant, two products were obtained from the process: gas and carbonized solid. As no liquid fraction was obtained, the gas fraction is a greater percentage made up of both condensable and non-condensable compounds, which were obtained separately at the laboratory scale. The pilot plant was designed so that the gases produced by thermolysis were burnt continuously in a combustion chamber, while the carbonized fraction was fed in batches for co-combustion. To determine composition and combustion ability, the gas and solid products from the pilot process were characterized by chromatographic analysis of the gaseous fraction and chemical analysis and programmed-temperature combustion of the carbonized solid. The composition of the combustion gases, rich in light hydrocarbons, and the carbon present in the carbonized fraction enable the energetic valorization of these products. The combustion gases were subjected to a cleaning process and their composition analysed twice: before and after the gas cleaning treatment. The study led to a positive assessment of the possible use of the process products as fuel, provided that the combustion gases are treated. As most of the sulphur and chlorine from the original waste are mainly concentrated in the solid fraction, the use of char as a fuel will depend on the effectiveness of clean-up techniques for combustion gases. During gas cleansing, neutralizing with sodium bicarbonate proved effective, especially for the acidic compounds HCl, HF and SO(2).     

Adsorption of natural organic matter from waters by iron coated pumice

Natural pumice particles were used as granular support media and coated with iron oxides to investigate their adsorptive natural organic matter (NOM) removal from waters. The impacts of natural pumice source, particle size fraction, pumice dose, pumice surface chemistry and specific surface area, and NOM source on the ultimate extent and rate of NOM removal were studied. All adsorption isotherm experiments were conducted employing the variable-dose completely mixed batch reactor bottle-point method. Iron oxide coating overwhelmed the surface electrical properties of the underlying pumice particles. Surface areas as high as 20.6m(2)g(-1) were achieved after iron coating of pumice samples, which are above than those of iron coated sand samples reported in the literature. For all particle size fractions, iron coating of natural pumices significantly increased their NOM uptakes both on an adsorbent mass- and surface area-basis. The smallest size fractions (<63 microm) of coated pumices generally exhibited the highest NOM uptakes. A strong linear correlation between the iron contents of coated pumices and their Freundlich affinity parameters (K(F)) indicated that the enhanced NOM uptake is due to iron oxides bound on pumice surfaces. Iron oxide coated pumice surfaces preferentially removed high UV-absorbing fractions of NOM, with UV absorbance reductions up to 90%. Control experiments indicated that iron oxide species bound on pumice surfaces are stable, and potential iron release to the solution is not a concern at pH values of typical natural waters. Based on high NOM adsorption capacities, iron oxide coated pumice may be a promising novel adsorbent in removing NOM from waters. Furthermore, due to preferential removal of high UV-absorbing NOM fractions, iron oxide coated pumice may also be effective in controlling the formation of disinfection by-products in drinking water treatment.     

The influence of radical architecture on cadmium bioaccumulation in the black mangrove, Avicennia germinans L

Two groups of Avicennia germinans plants with differences in the radical architecture were exposed under hydroponic conditions to 95ppm of cadmium (Cd) for a period of 24h. Later, Cd concentration in roots, stems and leaves was determined by graphite furnace atomic absorption spectrophotometry. Our results showed that, for both groups of plants, the roots accumulated higher concentration of Cd as compared to stems and leaves, though, the plants of group B displayed enhanced radical architecture, better growth performance, and lower Cd concentration as compared to plants of group A. In contrast, low values of leaves/roots Cd transportation index, and bioaccumulation factor were found in plants of group B. These results suggest that the higher radical architecture developed in plants of group B might better adjust the uptake of Cd as a result of an integrated network of multiple response processes for instances, production of organic acids, antioxidative replay, cell-wall lignification and/or suberization. Further studies will be focused in understanding the role of the radical system in mangrove plants with the rhizosphere activation and root adsorption to soil Cd under natural conditions.     

Aerobic degradation of di- and trichlorobenzenes by two bacteria isolated from polluted tropical soils

Two polychlorinated biphenyl (PCBs)-degrading bacteria were isolated by traditional enrichment technique from electrical transformer fluid (Askarel)-contaminated soils in Lagos, Nigeria. They were classified and identified as Enterobacter sp. SA-2 and Pseudomonas sp. SA-6 on the basis of 16S rRNA gene analysis, in addition to standard cultural and biochemical techniques. The strains were able to grow extensively on dichloro- and trichlorobenzenes. Although they failed to grow on tetrachlorobenzenes, monochloro- and dichlorobenzoic acids, they were able to utilize all monochlorobiphenyls, and some dichlorobiphenyls as sole sources of carbon and energy. The effect of incubation with axenic cultures on the degradation of 0.9 mM 1,4-dichlorobenzene, 0.44 mM 1,2,3- and 0.43 mM 1,3,5-trichlorobenzene in mineral salts medium was studied. Approximately, 80-90% of these xenobiotics were degraded in 200 h, concomitant with cell increase of up to three orders of magnitude, while generation times ranged significantly (P<0.05) from 17-32 h. Catechol 1,2-dioxygenase and catechol 2,3-dioxygenase activities were detected in crude cell-free extracts of cultures pre-grown with benzoate, with the latter enzyme exhibiting a slightly higher activity (0.15-0.17 micromolmin(-1) mg of protein(-1)) with catechol, suggesting that the meta-cleavage pathway is the most readily available catabolic route in the SA strains. The wider substrate specificity of these tropical isolates may help in assessing natural detoxification processes and in designing bioremediation and bioaugmentation methods.     

The impact of UV-B and sulphur- or copper-containing solutions in acidic conditions on chlorophyll fluorescence in selected Ramalina species

Ramalina maciformis and Ramalina lacera were exposed to different solutions and UV-B to seek for alterations in the PSII photosynthetic quantum yield (F(v)/F(m)), in response to chemicals and radiation. For R. maciformis, significant alterations of the F(v)/F(m) ratio occurred only in response to different bisulphite solutions. The F(v)/F(m) ratio decreased most in R. maciformis and R. lacera following exposure to 5 and 1 mM bisulphite, respectively. Significant differences in F(v)/F(m) ratios were observed for R. lacera in response to different solutions and light at different wavelengths, this being synergistic. The PSII system was unaffected by simulated acid rain in both lichens. R. maciformis, in particular, may survive limited acid rain exposure owing to high Ca oxalate accumulation. The F(v)/F(m) ratio decreased most in R. lacera following short-term exposures to CuSO(4), suggesting that this species is more sensitive to Cu ions under acidic conditions.