Protein adducts as biomarkers of exposure to aromatic diisocyanates in workers manufacturing polyurethane (PUR) foam

This work was undertaken to investigate the usefulness of diisocyanate-related protein adducts in blood samples as biomarkers of occupational exposure to toluene diisocyanate (TDI; 2,4- and 2,6-isomers) and 4,4'-methylenediphenyl diisocyanate (MDI). Quantification of adducts as toluene diamines (TDAs) and methylenedianiline (MDA) was performed on perfluoroacylated derivatives by gas chromatography-mass spectrometry (GC-MS/MS) in negative chemical ionisation mode. TDI-derived adducts were found in 77% of plasma and in 59% of globin samples from exposed workers manufacturing flexible polyurethane foam. The plasma levels ranged from 0.003 to 0.58 nmol mL(-1) and those in globin from 0.012 to 0.33 nmol g(-1). The 2,6-isomer amounted to about two-thirds of the sum concentration of TDA isomers. MDI-derived adducts were detected in 3.5% of plasma and in 7% of globin samples from exposed workers manufacturing rigid polyurethane foam. A good correlation was found between the sum of TDA isomers in urine and that in plasma. The relationship between globin adducts and urinary metabolites was ambiguous. Monitoring TDI-derived TDA in plasma thus appears to be an appropriate method for assessing occupational exposure. Contrary to TDI exposure, adducts in plasma or globin were not useful in assessing workers' exposure to MDI. An important outcome of the study was that no amine-related adducts were detected in globin samples from TDI- or MDI-exposed workers, alleviating concerns that TDI or MDI might pose a carcinogenic hazard. Further studies are nevertheless required to judge whether diisocyanates per se could be such a hazard.     

Hydrogeochemistry and statistical analysis applied to understand fluoride provenance in the Guarani Aquifer System, Southern Brazil

High fluoride concentrations (up to 11 mg/L) have been reported in the groundwater of the Guarani Aquifer System (Santa Maria Formation) in the central region of the state of Rio Grande do Sul, Southern Brazil. In this area, dental fluorosis is an endemic disease. This paper presents the geochemical data and the combination of statistical analysis (Principal components and cluster analyses) and geochemical modeling to achieve the hydrogeochemistry of the groundwater and discusses the possible fluoride origin. The groundwater from the Santa Maria Formation is comprised of four different geochemical groups. The first group corresponds to a sodium chloride groundwater which evolves to sodium bicarbonate, the second one, both containing fluoride anomalies. The third group is represented by calcium bicarbonate groundwater, and in the fourth, magnesium is the distinctive parameter. The statistical and geochemical analyses supported by isotopic measurements indicated that groundwater may have originated from mixtures of deeper aquifers and the fluoride concentrations could be derived from rock/water interactions (e.g., desorption from clay minerals).     

Involving local farmers in rehabilitation of degraded tropical forests: some lessons from Ghana

The role of community-based plantation development in forest rehabilitation and poverty alleviation is a pressing issue for the government of Ghana. In this paper, we present an analysis of the prospects of a community-based plantation using taungya systems and indigenous trees as means to forest rehabilitation and livelihood improvement in Ghana. The project management strategies, communication process and incentive mechanism and their impact on local participation are discussed with the aim to recommending a mechanism through which local farmers can best be involved in rehabilitation of degraded sites in the future in Ghana. Data were collected through a survey using personal interviews of 431 farming households and ten key informants from ten communities living in scattered hamlets in and around forests reserves. The results show a high rate of local participation in project tree planting activities. Four years after the project’s initiation, about 250 ha of plantations had been established using twelve priority indigenous and one exotic species and farmers had indicated improvement in their farming practices and availability of food and forest products. Restoring forest quality as a timber resource and associated values, getting money, food stuff and timber and non-timber for domestic use, and having access to fertile land for farming were the top three issues prioritised by respondents as motivational factors for engaging in the project activities. Overall, this project demonstrates that reversing tropical forest degradation is possible. For this we need local involvement in tree domestication combined with activities that addresses livelihood needs and environmental concerns. This case also demonstrates the prospects of utilising indigenous tree species, not only exotic species that dominated tree planting in the past, for plantations and landscape rehabilitation in Ghana. Readers should send their comments on this paper to BhaskarNath@aol.com within 3 months of publication of this issue.     

Satellite image analysis of human caused changes in the tundra vegetation around the city of Vorkuta,north-European Russia

In this paper we present what kind of human impacted changes can be found in dwarf birch (Betula nana) dominated shrub tundra vegetation around the large industrial complex of Vorkuta in the north-European Russian tundra. Using fieldwork data and Landsat TM satellite image we could identify two impact zones: (1) Pollution zone (150-200 km2). In this zone most of the lichen species are absent. Changes in vegetation communities' species composition in all main plant groups are obvious. Willows especially are more dominant than in the unpolluted sites. (2) Slight pollution/disturbance zone (600-900 km2). Here vegetation changes are mainly similar but less so than the changes in the first zone. Particularly, the amount of herbs and grasses is increased when compared to unpolluted areas. The pollution zones are spatially connected to the main emission sources in the area. Zones spread furthest to the northeast, matching the prevailing winds during winter.     

Speciated arsenic in air: measurement methodology and risk assessment considerations

Accurate measurement of arsenic (As) in air is critical to providing a more robust understanding of arsenic exposures and associated human health risks. Although there is extensive information available on total arsenic in air, less is known on the relative contribution of each arsenic species. To address this data gap, the authors conducted an in-depth review of available information on speciated arsenic in air. The evaluation included the type of species measured and the relative abundance, as well as an analysis of the limitations of current analytical methods. Despite inherent differences in the procedures, most techniques effectively separated arsenic species in the air samples. Common analytical techniques such as inductively coupled plasma mass spectrometry (ICP-MS) and/or hydride generation (HG)- or quartz furnace (GF)-atomic absorption spectrometry (AAS) were used for arsenic measurement in the extracts, and provided some of the most sensitive detection limits. The current analysis demonstrated that, despite limited comparability among studies due to differences in seasonal factors, study duration, sample collection methods, and analytical methods, research conducted to date is adequate to show that arsenic in air is mainly in the inorganic form. Reported average concentrations of As(III) and As(V) ranged up to 7.4 and 10.4 ng/m3, respectively, with As(V) being more prevalent than As(III) in most studies. Concentrations of the organic methylated arsenic compounds are negligible (in the pg/m3 range). However because of the variability in study methods and measurement methodology, the authors were unable to determine the variation in arsenic composition as a function of source or particulate matter (PM) fraction. In this work, the authors include the implications of arsenic speciation in air on potential exposure and risks. The authors conclude that it is important to synchronize sample collection, preparation, and analytical techniques in order to generate data more useful for arsenic inhalation risk assessment, and a more robust documentation of quality assurance/quality control (QA/QC) protocols is necessary to ensure accuracy, precision, representativeness, and comparability.     

Stabilisation of MSWI bottom ash with sulphide-rich anaerobic effluent

Effluent of an anaerobic sulphate-reducing wastewater treatment process was used to stabilise bottom ash. The effect of stabilisation on the concentration and binding of Ca, P, S, Cu, Pb, Zn, As, Cr, and Mo were studied by comparing results of sequential extraction from fresh and stabilised bottom ash. The stabilisation treatment improved the retention of Ca, Cu, Pb, S, and Zn in bottom ash compared to a treatment with ion-exchanged water. In addition to retention, Cu, S, and Zn were accumulated from the anaerobic effluent in the bottom ash. Concentrations of As, Cr, and Mo remained on the same level, whereas leaching of P increased compared to control treatment with ion-exchanged water. Improved retention and accumulation were the result of increased binding to less soluble fractions. The highest increases were in the sulphide and organic carbon bound fraction and in the carbonate fraction. Enhanced carbonation was probably due to CO2 deriving from the degradation of organic carbon. Flushing of stabilised bottom ash with ion-exchanged water ensured that the observed changes were not easily reversed. Most of the sulphide in the anaerobic effluent was removed when it was passed through bottom ash. The objective was to study the feasibility of sulphide-rich anaerobic effluent in bottom ash stabilisation and changes in the binding of the elements during stabilisation. In addition, the ability of the process to remove sulphide from the effluent was observed.