Groundwater geochemistry diagnostics during in situ ERH remediation

In situ remediation represents a series of challenges in interpreting the monitoring data on remedial progress. Among these challenges are problems in determining the progress of the remediation and the mechanisms responsible, so that the process can be optimized. The release of organic pollutants to groundwater systems and in situ remediation technologies alter the groundwater chemistry, but outside of natural attenuation studies using inorganic chemical analyses as indicators of intrinsic biodegradation, typically little attention has been paid to the changes in inorganic groundwater chemistry. Smith (2008) noted that during an electrical resistance heating remediation that took place at a confidential site in Chicago, a two‐orders‐of‐magnitude increase in chloride concentrations occurred during the remediation. This increase in chloride resulted in a corresponding increase in calcium as a result of what is known as the common ion effect. Carbon dioxide is the gas found in highest concentrations in natural groundwater (Stumm & Morgan, 1981), and its fugacity (partial pressure) corresponds directly with calcium concentrations. Carbon dioxide at supersaturation in groundwater is capable of dissolving organic compounds, such as trichloroethene, facilitating removal of nonaqueous‐phase liquids at temperatures below the boiling point of water. One means of diagnosing these reactions is through the use of compound‐specific isotopic analysis, which is capable of distinguishing between evaporation, biodegradation, and differences in sources. The appropriate diagnosis has the potential to optimize the benefits from these reactions, lower energy costs for removal of nonaqueous‐phase liquids, and direct treatment where it is needed most. © 2010 Wiley Periodicals, Inc.     

Environmentally Friendly Polyurethane Composites: Preparation, Characterization and Mechanical Properties

The waterborne polyurethane (PU) prepolymer was prepared based on isophorone diisocyanate (IPDI), polyester polyol (N220), dimethylol propionic acid (DMPA) and hydroxyethyl methyl acrylate (HEMA). The modified waterborne polyurethane–acrylate (PUA) emulsions were obtained with different proportions of acrylate (butyl acrylate and methyl methacrylate) and initiating agent by in situ dispersion technique. The structures and thermal properties of prepared PU and PUA were analyzed and characterized with FT-IR, UV–Vis spectroscopy and DSC. The PUA hybrid samples had lower glass transition temperature of hard segment and higher decomposition temperatures than PU sample. Performances of the emulsion and film were studied by means of apparent viscidity, particle size and polydispersity, surface tension and mechanical properties. The results indicated that the particle sizes of the PUA dispersions were larger than those of the pure PU and the solvent resistance, mechanical properties of PUA films was improved compare with the unmodified polyurethane film. The film had the biggest hardness and the least water absorption when the BA/MMA mass ratio 5:5 modified PU. The obtained PUA have great potential application such as coatings, leather finishing, adhesives, sealants, plastic coatings and wood finishes.     

Finished leather waste chromium acid extraction and anaerobic biodegradation of the products

Due to the amounts of chromium in the leachate resulting from leather leaching tests, chromium sulfate tanned leather wastes are very often considered hazardous wastes. To overcome this problem, one option could be recovering the chromium and, consequently, lowering its content in the leather scrap. With this objective, chromium leather scrap was leached with sulfuric acid solutions at low temperature also aiming at maximizing chromium removal with minimum attack of the leather matrix. The effects of leather scrap dimension, sulfuric acid and sodium sulfate concentration in the solutions, as well as extraction time and temperature on chromium recovery were studied, and, additionally, organic matrix degradation was evaluated. The best conditions found for chromium recovery were leather scrap conditioning using 25 mL of concentrated H₂SO₄/L solution at 293 or 313 K during 3 or 6 days. Under such conditions, 30–60 ± 5% of chromium was recovered and as low as 3–6 ± 1% of the leather total organic carbon (TOC) was dissolved. Using such treatment, the leather scrap area and volume are reduced and the residue is a more brittle material showing enhanced anaerobic biodegradability. Although good recovery results were achieved, due to the fact that the amount of chromium in eluate exceeded the threshold value this waste was still hazardous. Thus, it needs to be methodically washed in order to remove all the chromium de-linked from collagen.     

Assessing Sustainability at Multiple Scales in a Rotational Bushmeat Hunting System

Abstract: Results of many studies show unsustainable levels of bushmeat hunting across West/Central Africa. Nevertheless, these results are usually derived from snapshot sustainability indices in which critical parameters are often taken from the literature. Simple, more informative tools for assessing sustainability are needed. We evaluated the impact of bushmeat hunting across a range of temporal, spatial, and taxonomic scales in a comparison of different measures of sustainability. Over 15 months in 2002–2004 in and around a village close to Equatorial Guinea's Monte Alén National Park, we collected data via a village offtake survey, hunter‐camp bushmeat‐consumption diaries, hunter interviews, and following hunters during hunts. We compared 2003 data with a previous offtake survey (1998–1999) and interview reports back to 1990. In the past 14 years, average distance from the village at which hunters operated remained constant, with hunters switching back and forth between long‐established camps, although trapping effort increased. In the past 5 years, overall offtake and number of active hunters did not change substantially, although catch per unit effort (CPUE) decreased slightly. Although the proportion of the two most commonly trapped species (Cephalophus monticola and Atherurus africanus) and gun‐hunted primates increased in the offtake, species presumably less robust to trapping decreased slightly. Apparent sustainability in economic terms may be masking gradual local extirpation of more vulnerable species before and during this study. Our results suggest that changes in prey profiles and CPUE may be the most accurate indicators of actual sustainability; these indices can be monitored with simple village‐based offtake surveys and hunter interviews to improve community management of bushmeat hunting.     

The effects of partial mortality on the fecundity of three common Caribbean corals

The recent intensification of human disturbances in the Caribbean has increased the prevalence of partial mortality on coral colonies. Partial mortality can change colony size by directly shrinking colonies or by splitting colonies into fragments. A reduction in colony size can also adversely affect fecundity and fitness as internal resources shift away from reproduction toward colony maintenance. This study aimed to determine whether three Caribbean coral species, Siderastrea siderea, Montastraea faveolata, and Diploria strigosa, along the reef tract in Puerto Morelos, Mexico (20^o52′N, 86^o51′W), continued to dedicate resources to reproduction when colonies were fragmented to pre-maturation size. Contrary to expectations, eggs were found in colonies that were smaller than the maturation size and had been subjected to partial mortality. The continued dedication of resources toward reproduction, even in the smallest colonies, suggests that resource trade-offs away from reproduction are not as rigid as previously suggested in stressed corals.     

Do spotless starlings place feathers at their nests by ultraviolet color?

A considerable number of bird species carry feathers to their nests. Feathers’ presence in the nests has traditionally been explained by their insulating properties. Recently, however, it has been suggested that feathers carried to the nests by females of the spotted starling (Sturnus unicolor L.) could have an ornamental function based on their ultraviolet (300–400 nm) and human-visible longer wavelength (400–700 nm) coloration. In our population, 95.7% of feathers found inside next-boxes occupied by nesting starlings were rock dove fly feathers. Of these feathers, 82.7% were naturally positioned with their reverse side oriented toward the entrance hole and 42.4% of all found feathers were situated within the nest-cup. Here we experimentally assess the signaling function of ultraviolet coloration of feathers in nests of spotless starlings by providing nests with a number of pigeon flight feathers that were respectively treated on their obverse, reverse, both, or neither side with a UV blocker. Starlings placed 42.5% of the experimental feathers in the nest-cup irrespective of the UV block treatment. Orientation of feathers toward the entrance hole was not related with their ultraviolet radiation. However, feathers placed within the nest-cup were more likely found with their reverse side oriented toward the entrance hole confirming our correlative findings. These results suggest a minor role of ultraviolet coloration on feather location by spotless starlings.