Sources of Volatile Organic Compounds in a University Building

A total of 34 volatile organic compounds (VOCs) were measured in the indoor of laboratories, offices and classrooms of the Chemical Engineering Department of Hacettepe University in Ankara in 2 week-day passive sampling campaigns. The average concentrations ranged from 0.77 to 265 μg m^?3 at the different indoor sites, with the most abundant VOC found to be toluene (119.6 μg m^?3), followed by styrene (21.24 μg m^?3), 2-ethyltoluene (17.11 μg m^?3), n-hexane (10.21 μg m^?3) and benzene (9.42 μg m^?3). According to the factor analysis, the evaporation of solvents used in the laboratories was found to be the dominant source.     

Isolation and characterization of metal resistant-tolerant rhizosphere bacteria from the serpentine soils in Turkey

Despite the number of studies describing metal hyper-accumulating plants and their associated bacteria in various regions and countries, there is no information on rhizosphere microbial potential of the Turkish serpentine soils. This study aimed to explore the rhizosphere microbial diversity of Ni-resistant, hyper-accumulating plants grown on Ni-rich soils and their metal tolerance–resistance characteristics. One hundred ninety-one locations were visited to collect soil and plant samples from different serpentine regions of Western Turkey. Following bioavailable and total Ni analysis of collected samples, the seeds of the selected plants with higher Ni content were taken to the growth/germination test in a range of serpentine soils in a growth chamber condition. In order to investigate the rhizosphere microbial diversity, Isatis pinnatiloba and Alyssum dasycarpum which were able to germinate and grow well in the preliminary tests, were introduced to 6-month greenhouse experiment in the range of three serpentine soils with higher bioavailable Ni content. I. pinnatiloba had a better stimulatory effect on the rhizosphere microbial diversity. A total of 22 bacterial isolates were identified from different soil conditions in the end of experiment. Following microbial identification and confirmation tests, 11 isolates were found to be resistant and tolerant to the increasing concentrations of Ni, Pb, Cd and Zn in the range of 50–2,000 mg L^− 1, which was considerably higher than those indicated by earlier studies. The strains isolated and identified from the Turkish serpentine soils were the members of genera Arthrobacter, Bacillus, Microbacterium and Staphylococcus.     

Influence of multi-industrial activities on trace metal contamination: an approach towards surface water body in the vicinity of Dhaka Export Processing Zone (DEPZ)

Industrial wastewater discharged into aquatic ecosystems either directly or because of inadequate treatment of process water can increase the concentrations of pollutants such as toxic metals and others, and subsequently deteriorate water quality, environmental ecology and human health in the Dhaka Export Processing Zone (DEPZ), the largest industrial belt of 6-EPZ in Bangladesh. Therefore, in order to monitor the contamination levels, this study collected water samples from composite effluent points inside DEPZ and the surrounding surface water body connected to effluent disposal sites and determined the environmental hazards by chemical analysis and statistical approach. The water samples were analysed by inductively coupled plasma mass spectrometry to determine 12 trace metals such as As, Ag, Cr, Co, Cu, Li, Ni, Pb, Se, Sr, V and Zn in order to assess the influence of multi-industrial activities on metal concentrations. The composite effluents and surface waters from lagoons were characterized by a strong colour and high concentrations of biochemical oxygen demand, chemical oxygen demand, electrical conductivity, pH, total alkalinity, total hardness, total organic carbon, Turb., Cl(-), total suspended solids and total dissolved solids, which were above the limit of Bangladesh industrial effluent standards, but dissolved oxygen concentration was lower than the standard value. The measurement of skewness and kurtosis values showed asymmetric and abnormal distribution of the elements in the respective phases. The mean trend of variation was found in a decreasing order: Zn > Cu > Sr > Pb > Ni > Cr > Li > Co > V > Se > As > Ag in composite industrial effluents and Zn > Cu > Sr > Pb > Ni > Cr > Li > V > As > Ag > Co > Se in surface waters near the DEPZ. The strong correlations between effluent and surface water metal contents indicate that industrial wastewaters discharged from DEPZ have a strong influence on the contamination of the surrounding water bodies by toxic metals. The average contamination factors were reported to be 0.70-96.57 and 2.85-1,462 for industrial effluents and surface waters, respectively. The results reveal that the surface water in the area is highly contaminated with very high concentrations of some heavy/toxic metals like Zn, Pb, Cu, Ni and Cr; their average contamination factors are 1,460, 860, 136, 74.71 and 4.9, respectively. The concentrations of the metals in effluent and surface water were much higher than the permissible limits for drinking water and the world average concentrations in surface water. Therefore, the discharged effluent and surface water may create health hazards especially for people working and living inside and in the surrounding area of DEPZ.     

Assessment of seasonal variations of surface water quality characteristics for Porsuk Stream

In this study, the factor analysis technique is applied to surface water quality data sets obtained from Porsuk stream in Turkey, generated during 10 years (1995-2005) monitoring of 29 parameters at one site (Esenkara) for all four seasons. The varifactors obtained from factor analysis indicate that the parameters responsible for water quality variations are mainly related to mineral and inorganic nutrients, organic pollution, microbiological pollution in winter and spring; mineral and nutrients in summer; microbiological and nutrient pollution in fall. This study presents the necessity and usefulness of multivariate statistical assessment of large and complex databases in order to get better information about the quality of surface water.     

Wind energy and Turkey

The global energy requirement for sustaining economic activities, meeting social needs and social development is increasing daily. Environmentally friendly, renewable energy resources are an alternative to the primary non-renewable energy resources, which devastate ecosystems in order to meet increasing demand. Among renewable energy sources such as hydropower, biopower, geothermal power and solar power, wind power offers distinct advantages to Turkey. There is an increasing tendency toward wind globally and the European Union adjusted its legal regulations in this regard. As a potential EU Member state, Turkey is going through a similar process. The number of institutional and legal regulations concerning wind power has increased in recent years; technical infrastructure studies were completed, and some important steps were taken in this regard. This study examines the way in which Turkey has developed support for wind power, presents a SWOT analysis of the wind power sector in Turkey and a projection was made for the concrete success expected to be accomplished in the future.     

Heat and mass transfer in the vadose zone with plant roots

The vadose zone is the intermediate medium between the atmosphere and groundwater. The modeling of the processes taking place in the vadose zone needs different approaches to those needed for groundwater transport problems because of the marked changes in environmental conditions affecting the vadose zone. A mathematical model to simulate the water flow, and the fate and transport of recalcitrant contaminants was developed, which could be applied to various bioremediation methods such as phytoremediation and natural attenuation in the vadose zone. Two-phase flow equations and heat flux models were used to develop the model. Surface energy, balance equations were used to estimate soil surface temperature, and root growth and root distribution models were incorporated to represent the special contribution of plant mots in the vegetated soils. Interactions between the roots and environmental conditions such as temperature and water content were treated by incorporating a feedback mechanism that made allowance for the effects of water and temperature stresses on root distribution and water uptake by roots. In conducting the modeling study, Johnson grass and unplanted soil were simulated to compare the effect of root water uptake on soil water content. After the numerical experiments were conducted to investigate model behavior, the proposed model was applied to estimate actual water flow and heat flow in field lysimeter experiments over a 1-year period. Root growth and distribution for Johnson grass and rye grass were simulated to compare the warm season grass to the cold season grass. A significant agreement was observed between the simulations and measured data.     

Use of glazed ceramic waste as additive in mortar and the mathematical modelling of its strength

This study investigated the reusability of waste material from the tile manufacturing industry as an alternative material to natural pozzolan trass. Yield strength values of mortar made from Portland cement (CEM 142.5), were measured by adding glazed ceramic waste and trass at various weight ratios (5 to 40%). The test results proved that the strength values at 2, 7, and 28 days gave good results for concentrations of waste materials less than 5-10% in the cement. A decrease in strength was observed at higher concentrations. Mathematical modelling results showed a logarithmic correlation between the mortar strength and weight fraction of cement.     

Plant aided bioremediation in the vadose zone: model development and applications

Phytoremediation has the potential to enhance clean up of land contaminated by various pollutants. A mathematical model that includes a two-fluid phase flow model of water flow as well as a two-region soil model of contaminant reactions was developed and applied to various bioremediation scenarios in the unsaturated zone, especially to plant-aided bioremediation. To investigate model behavior and determine the main parameters and mechanisms that affect bioremediation in unplanted and planted soils, numerical simulations of theoretical scenarios were conducted before applying the model to field data. It is observed from the results that parameters affecting the contaminant concentration in the water phase, such as aqueous solubility, the octanol-water partition coefficient, and organic carbon content of the soil controlled the contaminant fate in the vadose zone. Simulation using the developed model also characterized the fate and transport of the contaminants both in planted and unplanted soils satisfactorily for field applications. Although phytoremediation has the potential for remediation of contaminated soils, results from both modeling and field studies suggested that plants may not always enhance the remediation efficiency when the soil already has a high microbial concentration, when the contaminant bioavailability is low, or when the overall reaction is mass transfer-limited. Therefore, other steps to increase contaminant bioavailability are needed in phytoremediation applications; natural purification mechanisms such as aging, volatilization, and natural bioremediation should be considered to maximize the plant effect and minimize the cost.