Rapid estimation of compost enzymatic activity by spectral analysis method combined with machine learning

The aim of this study was to investigate the feasibility of using visible near-infrared (VisNIR) diffuse reflectance spectroscopy (DRS) as an easy, inexpensive, and rapid method to predict compost enzymatic activity, which traditionally measured by fluorescein diacetate hydrolysis (FDA-HR) assay. Compost samples representative of five different compost facilities were scanned by DRS, and the raw reflectance spectra were preprocessed using seven spectral transformations for predicting compost FDA-HR with six multivariate algorithms. Although principal component analysis for all spectral pretreatments satisfactorily identified the clusters by compost types, it could not separate different FDA contents. Furthermore, the artificial neural network multilayer perceptron (residual prediction deviation = 3.2, validation r² = 0.91 and RMSE = 13.38 μg g^?1 h^?1) outperformed other multivariate models to capture the highly non-linear relationships between compost enzymatic activity and VisNIR reflectance spectra after Savitzky–Golay first derivative pretreatment. This work demonstrates the efficiency of VisNIR DRS for predicting compost enzymatic as well as microbial activity.     

Smart nanopackaging for the enhancement of food shelf life

Environmental Chemistry Letters - Food spoilage is a major global concern due to the lack of proper packaging technology. Nanotechnology is expected to improve food packaging. Indeed, novel...     

Renewable energy powered evacuated tube collector refrigerator system

This article presents a numerical study of an Evacuated Tube Collector (ETC) based Ammonia-Water absorption refrigeration system. This system utilizes solar energy as an energy source and does not depend on conventional energy sources for its operation. The present system involves the use of hot water as an energy carrier for generator in an absorption system. The analysis system is based on computational model being developed and the thermodynamic properties of working fluids have been used from the computer code. The variation of performance parameters such as heat load of different components, exergy loss, COP_COOLING, COP_HEATING and Exergy efficiency are studied with varying generator temperature. The results indicate that COP_COOLING as well COP_HEATING lies in the range of 0.012–0.498 and 1.012–1.498 respectively and the values obtained are based on the maximum available solar intensity of 0.9 kW/m² which corresponds to the collector area of about 431.7 m² and hot water in the range of 90 °C. It is concluded that the maximum exergy loss is in generator and it is lowest in condenser. The ETC based absorption refrigeration system can be powered by renewable energy sources and does not employ ozone depleting substances.     

Impact of Ni(II), Zn(II) and Cd(II) on biogassification of potato waste

A study was conducted on anaerobic digestion of potato waste and cattle manure mixture, inoculated with 12% inoculum and diluted to 1:1 substrate water ratio at 37 +/- 1 degrees C. Initially pH of substrate was found to be 4.5 to 5.0. Lime and sodium bicarbonate solutions were employed to adjust the pH to 7.5. Biogas production continued up to 10 and 7 days, when lime and sodium bicarbonate solutions were used to adjust the pH, respectively. Biogassification potential was studied in response to different ratio of waste and cattle manure. Biogas production rate was higher when potato waste and cattle manure were used in 50:50 ratio. Effect of two different concentrations (2.5 and 5.0 ppm) of three heavy metals viz. (Ni (II), Zn (II) and Cd (II)) on anaerobic digestion of substrate (potato waste--cattle manure, 50:50) was studied. At 2.5 ppm, all the three heavy metals increased biogas production rate over the control value. The percentage increase in biogas production over the control was highest by Cd, followed by Ni and Zn. In all the treatments, methane content of biogas increased with increase in time after feeding. Various physico-chemical parameters viz. total solids, total volatile solids, total organic carbon and chemical oxygen demand considerably declined after 7 days of digestion and decline was greater in presence of heavy metals as compared to control. The physico-chemical parameters revealed maximum decrease in the presence of 2.5-ppm concentrations of heavy metals with the substrate. Among all the three heavy metals employed in the study, Cd++ at 2.5 ppm was found to produce maximum biogas production rate. The use of three heavy metals to enhance biogas production from potato and other horticultural waste is discussed.     

Effect of transpiration on Pb uptake by lettuce and on water soluble low molecular weight organic acids in rhizosphere

The effect of transpiration (high and low) on Pb uptake by leaf lettuce and on water soluble low molecular weight organic acids (LMWOAs) in rhizosphere has been studied. After two weeks of growth the plants were cultured in greenhouse for more four weeks and two days. Pb(NO(3))(2) solutions of different concentrations (100, 200, and 300 mg l(-1) of Pb) were then added to the quartz sand pots of different plants and studies were initiated. Blank experiments (without treating the quartz sand pots with Pb(NO(3))(2) solutions) were also run in parallel. No significant differences in the growth of the plants with the concentrations of added Pb(NO(3))(2) solutions were observed by both low and high transpirations at the end of the 0, 3rd, and 10th days of studies. The total evaporation of the volatiles during 10 days did not depend on the concentration of Pb(2+) but with high transpiration the rate of evaporation was significantly higher than with low transpiration. Uptake of Pb by shoots and roots of the plants was found to be proportional to the concentration of various Pb(NO(3))(2) solutions added and more accumulation was observed in roots than in shoots at the end of 3rd and 10th days. High transpiration created more Pb uptake than low transpiration did. One volatile acid, propionic acid and nine non-volatile acids, lactic, glycolic, oxalic, succinic, fumaric, oxalacetic, D-tartaric, trans-aconitic, and citric acids in rhizosphere quartz sands were identified and quantified by gas chromatography (GC) analysis. D-Tartaric and citric acids were major among the non-volatile acids. The amount of LMWOAs in rhizosphere quartz sands increased with the higher amount of Pb uptake and also with the duration of studies. The total quantities of the LMWOAs in the rhizosphere quartz sands were significantly higher under high transpiration with 300 mg l(-1) Pb solution addition at the end of 10th day. The present study shows prominent correlation between transpiration and uptake of heavy metal and interesting correlation between Pb contaminated level and quantity of water soluble LMWOAs in rhizosphere quartz sands. The latter thus deserves of further studies.     

Comparative assessment of coal tars obtained from 10 former manufactured gas plant sites in the eastern United States

A comparative analysis was performed on eleven coal tars obtained from former manufactured gas plant sites in the eastern United States. Bulk properties analyzed included percent ash, Karl Fisher water content, viscosity and average molecular weight. Chemical properties included monocyclic- and polycyclic-aromatic hydrocarbon (PAH) concentrations, alkylated aromatic concentrations, and concentrations of aliphatic and aromatic fractions. It was found that there was at least an order-of-magnitude variation in all properties measured between the eleven coal tars. Additionally, two coal tars obtained from the same manufactured gas plant site had very different properties, highlighting that there can be wide variations in coal tar properties from different samples obtained from the same site. Similarities were also observed between the coal tars. The relative chemical distributions were similar for all coal tars, and the coal tars predominantly consisted of PAHs, with naphthalene being the single-most prevalent compound. The C(9-22) aromatic fraction, an indicator of all PAHs up to a molecular weight of approximately 276 gmole(-1), showed a strong power-law relationship with the coal tar average molecular weight (MW (ct)). And the concentrations of individual PAHs decreased linearly as MW (ct) increased up to ca. 1000 gmole(-1), above which they remained low and variable. Implications of these properties and their variation with MW (ct) on groundwater quality are discussed. Ultimately, while these similarities do allow generalities to be made about coal tars, the wide range of coal tar bulk and chemical properties reported here highlights the complex nature of coal tars.     

BOD-DO modeling and water quality analysis of a waste water outfall off Kochi, west coast of India

Water quality scenarios around an offshore outfall off Kochi were simulated using MIKE21 water quality model, assuming a high Biochemical Oxygen Demand (BOD=50 mg l(-1)) effluent discharge. The discharge is introduced into the model through an outfall located at a distance of 6.8 km from the shore at a depth of 10 m. Three scenarios were simulated with different discharge rates such as 2, 5 and 10 m3 s(-1), with BOD load of 8640, 21,600 and 43,200 kg day(-1) respectively. Model simulations were carried out to estimate the assimilation capacity of the waters off Kochi for the three discharge rates. The results show that for 10 m3 s(-1) effluent discharge, the initial BOD of 50 mg l(-1) reduced to 3.33 mg l(-1) at the outfall after 48 h. High BOD values were confined to an elliptical area of approximately 8 km2 around the outfall. Based on this, the assimilative capacity of the waters off Kochi in terms of BOD can be estimated as 38,000 kg day(-1). It is suggested that offshore waters could be used as a feasible alternative to the Kochi backwaters for the disposal of treated effluent.     

Colourimetric analysis and antimicrobial study of natural dyes and dyed silk

Colourimetric and antimicrobial activities of natural colourants and dyed silk have been studied. The colour strength (K/S) values were increased with increase in dye absorbance. The absorption of dyes on silk yarns was obtained from 10.56 to 39.48% at 5% concentration of dye from different plant extracts. The colourimetric parameters L¹, a¹, b¹, C, and H were measured for depth of the colour. The dyed silk with natural colourants displayed excellent antimicrobial activity (reduction rate: 25–65%) against the bacteria Escherichia coli and (reduction rate: 3–68%) against the fungal strain Aspergillus niger. The dyed silk exhibited good and durable fastness properties.     

Estimating the value of improved wastewater treatment: The case of River Ganga,India

In this paper we employ a stated preference environmental valuation technique, namely the choice experiment method, to estimate local public’s willingness to pay (WTP) for improvements in the capacity and technology of a sewage treatment plant (STP) in Chandernagore municipality, located on the banks of the River Ganga in India. A pilot choice experiment study is administered to 150 randomly selected Chandernagore residents and the data are analysed using the conditional logit model with interactions. The results reveal that residents of this municipality are willing to pay significant amounts in terms of higher monthly municipality taxes to ensure the full capacity of the STP is used for primary treatment and the technology is upgraded to enable secondary treatment. Overall, the results reported in this paper support increased investments to improve the capacity and technology of STPs to reduce water pollution, and hence environmental and health risks that are currently threatening the sustainability of the economic, cultural and religious values this sacred river generates.     

Recycling — an environmentally friendly and income generating activity towards sustainable solid waste management. Case study — Dar es Salaam City, Tanzania

Traditionally solid waste management has evolved as mainly the removal of municipal wastes by hauling them out of the city boundaries and dumping them ‘there’. This is in conformity with the ‘out of sight out of mind’ philosophy. However, with the ever increasing tonnage of refuse due to the expansion of urban centers, which implies increased collection, transportation and disposal costs, recycling is currently accepted as a sustainable approach to solid waste management. This paper reports on the findings of a study, conducted in the city of Dar es Salaam between the years 1993 and 1995, on the scavenging activities and recycling trends of some selected items in Dar es Salaam. Apart from the discussions on existing solid waste generation rates (2000 tonnes/day), composition (60% being organic/or vegetable matter) and their management in Dar es Salaam, the paper also presents data obtained through a survey of Vingunguti dump site and other waste collection centers. It was established that there are currently about 600 solid waste scavengers in Dar es Salaam, approximately 109 of whom operate at Vingunguti dump site and others at 14 different collection centers. Many of them opted for scavenging due to unemployment. The study findings indicate that their average monthly income exceeded the official minimum wage (at the time of study) enabling them to support their families. This demonstrates the potential of recycling to generate gainful employment with implied lower crime rates among the unemployed. Recycling activities in the city were observed to be not only a critical source of raw materials for small-scale industries, in the absence of which they would cease to operate, but also a widely accepted environmentally friendly technology for solid waste management. Out of 294 tonnes of studied waste materials (paper, metal, plastic, glass and textiles) only 4 tonnes are recovered and recycled. The remaining 290 tonnes/day of recyclable material are left to pollute the environment or are collected and transported for final disposal and, therefore, unnecessarily contribute to the shortening of the life span of the dump site. Finally, the paper gives some recommendations for improved recycling activity so as to make it an important means of reducing the overall volume of waste materials to be transported and deposited in the dump site and at the same time provide a potential opportunity for employment for unskilled workers.