Carcinogenicity of hexachlorocyclohexane (BHC) in pure inbred swiss mice.

Inbred Swiss mice were treated with technical BHC (1) orally with the diet or by intubation and (2) by skin painting. The total duration of the experiment was 80 weeks. There was no difference in body growth and mortality between the experimental and control groups. Symptoms of intoxication in the form of convulsions and tendency of circling in one direction with drooping ears were observed alongwith corneal opacity 40 weeks after the experiment. Oral BHC treatment resulted in a significant increase in the incidence of liver tumours and tumours of lymphoreticular tissue. Males and females were equally susceptible. Skin painting of mice did not significantly increase the incidence of tumour.     

Impact of water quality on the stress physiology of cultured Labeo rohita (Hamilton-Buchanan)

Investigation was conducted for 12 months in two water bodies, S1 with optimum water quality and S2 receiving sewage water. The water quality parameters were assessed in relation to the impact on the stress sensitive physiological parameters of fish Labeo rohita. While optimum levels of transparency, dissolved oxygen, unionised ammonia, alkalinity and hardness in S1 reflected in minimum variation of the physiological parameters of L. rohita but suboptimal levels of DO (nil-18.0 mg/l) and CO2 (nil-16.0 mg/l) observed diurnally and unionised ammonia (0.11-0.42 mg/l) found throughout the experimental period, resulted in significant variation in plasma cortisol (90.0-377.0 ng/ml), cholesterol (89.6-285.0 mg/dl) and condition factor (0.7-1.3) in L. rohita. The results are of significance for fish aquatic habitat management.     

A comparative study on the dissipation and microbial metabolism of organophosphate and carbamate insecticides in orchaqualf and fluvaquent soils of West Bengal

An experiment has been conducted under laboratory conditions to investigate the effect of phorate (an organophosphate insecticide) and carbofuran (a carbamate insecticide) at their recommended field rates (1.5 and 1.0 kga.i.ha-1, respectively) on the growth and multiplication of microorganisms as well as rate of dissipation and persistence of the insecticidal residues including their metabolites in laterite (typic orchaqualf) and alluvial (typic fluvaquent) soils of West Bengal. Application of phorate and carbofuran in general, induced growth and development of bacteria, actinomycetes, fungi, N2-fixing bacteria and phosphate solubilizing microorganisms in both the soils and the stimulation was more pronounced with phorate as compared to carbofuran. Application of phorate recorded highest stimulation of fungi in laterite and actinomycetes in alluvial soil. Carbofuran on the other hand, augmented fungi and N2-fixing bacteria in laterite and actinomycetes in alluvial soil. Bacterial population was inhibited due to the application of carbofuran in alluvial soil. Phorate sulfoxide and phorate sulfone, the two metabolites of phorate and 3-hydroxycarbofuran and 3-ketocarbofuran, the two metabolites of carbofuran isolated were less persistent in both the soils. Phorate persisted in laterite and alluvial soils up to 45 and 60 days, respectively depicting the half-life (T1/2) 9.7 and 11.5 days, respectively while the T1/2 of carbofuran for the said soils were 16.9 and 8.8 days, respectively. No metabolite of carbofuran was detected in soils after 30 days of incubation while phorate sulfone persisted in alluvial soil even after 60 days of application of the insecticide.     

Chemical fractionation and heavy metal accumulation in the plant of Sesamum indicum (L.) var. T55 grown on soil amended with tannery sludge: Selection of single extractants

A pot experiment was carried out to study the single and sequential extractions of metals in different tannery sludge amendment and the potential of the plant of Sesamum indicum L. var. T55 (sesame) for the removal of metals from tannery waste contaminated site. The metal extraction efficiency obtained with each extractants was slightly different and follow the order; EDTA>DTPA>NH(4)NO(3)>NaNO(3)>CaCl(2). The correlation analysis between extractable metals in the different amendments of sludge and metal accumulation in the plant (lower and upper parts) showed better correlation for most of the tested metals with EDTA extraction. In this study, a sequential extraction technique was applied on different amendments of tannery sludge. The results showed that Mn, Zn, Cr and Cd were mostly associated with Fe-Mn oxide fraction in most of the amendments, K and Ni was found in residual (RES) fraction, Fe and Cu was bound with organic matter (OM) and RES fractions and Na was associated with carbonate (CAR) fraction. The metal accumulation after 60 d of growth of the plant was found in the order of K>Na>Fe>Zn>Cr>Mn>Cu>Pb>Ni>Cd and its translocation was found less in upper part. The accumulation of toxic metals (Cr, Ni and Cd) in the plants was found to increase with increase in sludge ratio, in contrast, the accumulation of Pb decreased. In view of growth parameters and metal accumulation in the plant, it was observed that lower amendments (25%) of tannery sludge were found suitable for the phytoremediation of most of the studied metals.     

Changes in amino acid profile and metal content in seeds of Cicer arietinum L. (chickpea) grown under various fly-ash amendments

Seeds of Cicer arietinum L. plants are edible and a valuable source of protein. Accumulation of toxic metals in the edible part of the plant, grown in fields close to fly-ash (FA) landfills, may pose a threat to human health. In the present study, the effects of FA and its amendments with different ameliorants viz., garden soil (GS), press mud (PM) and saw dust (SD), on total soluble protein contents, amino acid composition and metal accumulation in seeds were investigated in var. CSG-8962 and var. C-235 of C. arietinum. Plants accumulated adequate amounts of essential metals viz. Fe, Cu, Zn in seeds, while the toxic metals such as Cd and Cr were taken up in smaller quantities. The accumulation of Cr and Cd was less in var. C-235 than var. CSG-8962. Amendment of FA with PM enhanced the amount of soluble protein and amino acids in both varieties and was found to be superior among all tested ameliorants. Both quantitative and qualitative analysis of amino acids showed better response in var. C-235 as compared to var. CSG-8962. Thus var. C-235 seems to be suitable for cultivation in FA contaminated areas due to more accumulation of essential metals and less accumulation of toxic metals in seeds. Application of PM may further improve the growth of plants and nutritional quality of seeds.     

Butachlor degradation in tropical soils: effect of application rate, biotic-abiotic interactions and soil conditions

The degradative characteristics of butachlor (N-Butoxymethyl-2-chloro-2',6'-diethyla- cetanilide) were studied under controlled laboratory conditions in clay loam alluvial (AL) soil (Typic udifluvent) and coastal saline (CS) soil (Typic endoaquept) from rice cultivated fields. The application rates included field rate (FR), 2-times FR (2FR) and 10-times FR (10FR). The incubation study was carried out at 30 degrees C with and without decomposed cow manure (DCM) at 60% of maximum water holding capacity (WHC) and waterlogged soil condition. The half-life values depended on the soil types and initial concentrations of butachlor. Butachlor degraded faster in AL soil and in soil amended with DCM under waterlogged condition. Microbial degradation is the major avenue of butachlor degradation from soils.     

Improving flammable mass estimation for vapor cloud explosion modeling in an offshore QRA

Presence of congestion and confinement in offshore modules due to limited availability of space make Vapor Cloud Explosions (VCEs) a significant contributor to risk. There are several methods available for quantifying the blast overpressure generated over distances and time. The approaches range from one-dimensional analysis using correlation models to 3-D analysis using Computational Fluid Dynamics (CFDs). The correlation models are easy to use and well-suited for assessing a number of credible VCE scenarios. However, the overpressure results predicted by correlation models depend on a good estimate of flammable mass. This paper proposes a method to improve the estimation of flammable mass. The UKOOA Ignition model developed by the Energy Institute London is used to estimate the flammable mass; and is modified to account for the effect of mitigation measures on release rate. A directional probability for wind is also added to the model. The proposed model takes into consideration the platform geometry and offshore conditions for each scenario, release location and direction, and wind direction. An offshore production platform with three deck levels is presented as an example case. The flammable mass is also computed using CFD and the results are compared to that of the proposed and the conventional methods. The results show that the flammable masses for selected scenarios are better estimated by the proposed method, being much lower than estimated by the conventional method, though larger than the CFD results. This paper presents an interim result of a project undertaken to improve QRA studies for VCE events.     

Leather Insole with Acupressure Effect: New Perspectives

Some wastes contain many reusable substances of high value. Solid leather waste is one such potential waste which can be converted into value added products. This study attempts to prepare leather insoles with acupressure effect from finished leather wastes and used leather wastes. Leather with acupressure effect (LAE) was fabricated using regenerated leather. LAE was characterized physico-chemically using Fourier transform infrared spectroscopy, thermo gravimetric analysis and scanning electron microscopy. Foot pressure measurements were done using LAE insoles on healthy individuals. Results proved that LAE insoles were able to increase the foot pressure of the wearer and thereby created an acupressure effect in them. Wearing of footwear with LAE insoles were beneficial compared to regular insoles. LAE possessed the required mechanical properties for insole production and it was also biodegradable in nature. The study proves that these composites could be successfully used for the production of cost-effective leather goods and therapeutic footwear. Production of useful byproducts from wastes is income generating and at the same time reduces environmental pollution and a feasible technology for waste recycling has been proved in this study.     

Improving the feasibility of aquaculture feed by using microalgae

Environmental Science and Pollution Research - The aquaculture industry is an efficient edible protein producer and grows faster than any other food sector. Therefore, it requires enormous amounts...