增加粮食需求,减少对无机氮的依赖性

较高的作物产量通常需要较高的养分使用率,因此就使无机氮的使用增加.到2030年,估计粮食的年需求量约为28亿t,相应的无机氮消耗量为9600万t(在1995～1997年间,无机氮的年消耗量为7800万t).从全球范围来讲,由于使用无机肥料而流失到周围环境中去的无机氮目前为每年3600万t,价值117亿美元,它们对环境保护起反作用.但是,新型的提高肥料使用效率(FUE)技术可以增加产量但不使无机氯的使用成比例增加.并且,含氮养分的供应可以通过改进农业生产系统和开发如生物固氮(BNF)等可替代资源而扩大.到2030年,随着出台适当的政策、实施技术转让、对研究和投资提供支持以及在农田采用化肥使用效率(FUE)和生物固氮(BNF)技术等,可以使无机氯每年节省1000万t,价值33亿美元.     

Fresh water blue green algae from three agro-climatic zones of Uttar Pradesh, India: distribution pattern with seasonal variation

The paper deals with 45 species of 21 genera of fresh water blue green algae (BGA) from three different agro-climatic zones of Uttar Pradesh. Samples were collected from different habitats varying in physico-chemical properties. Out of 45 species, 13 species belonged to order Chroococcales, 31 to order Nostocales, while only 1 species belonged to order Stigonimatales i.e. Fischerella mucicola. The physico-chemical parameters like pH, temperature, dissolved oxygen, electrical conductivity, nitrate, nitrite and rainfall play an important role in the periodicity of BGA. A positive correlation was found between dissolved oxygen (DO) of different ponds and species diversity, except in the case of western region of Uttar Pradesh (Farukhabad and Mahoba districts) where a positive correlation was found in electrical conductivity and total dissolved solids.     

The development of the acid deposition and oxidant model (ADOM)

This paper describes the development and testing of the Acid Deposition and Oxidant Model (ADOM), a nine-year project funded by a consortium consisting of Environment Ontario, Environment Canada, the German Umweltbundesamt, and the Electric Power Research Institute. The project consisted of three major phases: a design phase, an implementation phase, and an evaluation phase. In the design phase, the system being modeled was divided into its components-transport, gas phase chemistry, aqueous phase chemistry, dry deposition and cloud processes. The formulation of the modules for each of these processes was guided by the requirement that the modules reflect the state of the art, and at the same time be consistent with the available numerical resources. In the implementation phase, submodels were constructed, and then subjected to several tests, which included mathematical consistency checks, sensitivity studies, and evaluation against field and laboratory data. The modules were then assembled and interfaced with the input data sets. The codes for the modules as well as the overall model were vectorized to take advantage of the capabilities of supercomputers such as the CRAY. The North American and West German versions of the model are being tested against data collected in North America and in Europe. This paper describes the evaluation of ADOM with data associated with a regional ozone episode in Ontario in June 1983, and measurements made during an experiment to study the scavenging characteristics of spring storms in the central and northeastern United States in April 1981.     

A model of costs and resources for rural and peri-urban water supply and sanitation in the 1990s

This article develops a model of cost and financing strategies for rural and peri-urban water supply and sanitation. It suggests that significant progress towards the World Summit for Children's goal of universal access to water supply and sanitation can be made if a combination of strategies is adopted. On the cost side, significant cost reductions should be possible through efficiency in resource use and reduction of system management costs. On the financing side, it suggests restructuring the financing of the sector with improved efficiency and greater cost recovery in urban services; full recovery of operation and maintenance costs; cost sharing through community contributions in kind such as local labour and financially in rural and peri-urban water supply for basic levels of service depending on willingness and ability to pay and full cost recovery for higher levels of service; a high degree of cost recovery in rural and peri-urban sanitation; development of institutional structures for both collection and management of revenues; development of alternate financing mechanisms such as rural credit schemes and revolving funds, adapted in specific country contexts, including the required institutional mechanisms; and additional allocations from governments and external support agencies. Additional government or external financing alone, while critical, will not of itself lead to effectiveness in the use of resources. Equally, cost recovery alone cannot lead to universal access and sustainable solutions. A composite set of actions is needed within which building capacities of institutions and people is necessary for sustainability .     

GEOGRAPHIC VARIATION OF THE STATISTICAL PARAMETERS OF HYDROMETEOROLOGICAL DATA OF THE UNITED STATES1

ABSTRACT: Having determined various statistical parameters for five mean monthly hydrometeorological time series of the United States, directional variation of the autocorrelation numbers, their spatial distribution over the United States and statistical significances are presented in this paper. Two conceptually different approaches (one using directional strips of large combined watersheds and the other with analysis of variances) are employed to explore the geographic variation of the statistical parameters (autocorrelations and explained variances) in question. Results adequately indicate the correspondence between these variations and the observed topographic, climatologic and hydrologic characteristics over the United States.     

ROLE OF SYNTHETIC TIME SERIES IN HYDROMETEOROLOGICAL DATA ANALYSIS1

ABSTRACT: The use of synthetic time series (artificially simulated time series with specific and useful properties built into them) to increase the confidence in the statistical parameters of limited hydrometeorological time series is the subject matter of this paper. By constructing fourteen synthetic time series, a sensitivity analysis is performed to assess the net effect of nonstationarity, number of lags and small sample size on estimated spectral densities. Similarly, the effects of the harmonic-removal procedure on the resulting residual series and the confidence limits in cross spectral analysis are examined in the light of synthetic time series analysis. These analyses clearly indicate the useful supplemental role of synthetic time series in data analysis.     

Rapidly locating and characterizing pollutant releases in buildings

Releases of airborne contaminants in or near a building can lead to significant human exposures unless prompt response measures are taken. However, possible responses can include conflicting strategies, such as shutting the ventilation system off versus running it in a purge mode or having occupants evacuate versus sheltering in place. The proper choice depends in part on knowing the source locations, the amounts released, and the likely future dispersion routes of the pollutants. We present an approach that estimates this information in real time. It applies Bayesian statistics to interpret measurements of airborne pollutant concentrations from multiple sensors placed in the building and computes best estimates and uncertainties of the release conditions. The algorithm is fast, capable of continuously updating the estimates as measurements stream in from sensors. We demonstrate the approach using a hypothetical pollutant release in a five-room building. Unknowns to the interpretation algorithm include location, duration, and strength of the source, and some building and weather conditions. Two sensor sampling plans and three levels of data quality are examined. Data interpretation in all examples is rapid; however, locating and characterizing the source with high probability depends on the amount and quality of data and the sampling plan.     

Monitoring Long-Term Ecological Changes Through the Ecological Monitoring and Assessment Network: Science-Based and Policy Relevant

Ecological monitoring and its associated research programshave often provided answers to various environmental management issues. In the face of changing environmental conditions, ecological monitoring provides decision-makers with reliable information as they grapple with maintaining a sustainable economy and healthy environment. The EcologicalMonitoring and Assessment Network (EMAN) is a national ecological monitoring network consisting of (1) about 100 casestudy sites across the country characterized by long-term multi-disciplinary environmental work conducted by a multitudeof agencies (142 partners and counting); (2) a variety of lesscomprehensive yet more extensive monitoring sites; (3) a network where core monitoring variables of ecosystem change aremeasured; and (4) geo-referenced environmental observations. Environment Canada is the co-ordinating partner for the network through the EMAN Co-ordinating Office. EMAN's mission is to focus a scientifically-sound, policy-relevant ecosystem monitoring and research network based on (a) stabilizing a network of case-study sites operated by a varietyof partners, and (b) developing a number of cooperative dispersedmonitoring initiatives in order to deliver unique and needed goods and services. These goods and services include: (1) an efficient and cost-effective early warning system which detects,describes and reports on changes in Canadian ecosystems at a national or ecozone scale; and (2) cross-disciplinary and cross-jurisdictional assessments of ecosystem status, trends and processes. The early warning system and assessments of ecosystem status, trends and processes provide Environment Canada and partner organizations with timely information thatfacilitates increasingly adaptive policies and priority setting. Canadians are also informed of changes and trends occurring in Canadian ecosystems and, as a result, are betterable to make decisions related to conservation and sustainability.     

Effect of Sequential Mixing and Compounding Conditions on Cellulose Acetate/Layered Silicate Nanocomposites

Injection molded nanocomposites have been successfully fabricated from cellulose acetate (CA), eco-friendly triethyl citrate (TEC) plasticizer, and organically modified clay with and without maleic anhydride grafted cellulose acetate butyrate (CAB-g-MA) as a compatibilizer. The effects of processing conditions such as mixing methods, pre-plasticizing times, extruder retention times (RT) and addition of compatibilizer on the performance of these nanocomposites have been evaluated. The cellulosic plastic with CA/TEC (80/20 wt%) was used as the polymer matrix for nanocomposite fabrication. The morphologies of these nanocomposites were evaluated through X-ray diffraction (XRD) and transmission electron microscopy (TEM) studies. The mechanical properties of the nanocomposites were measured and have been correlated with the XRD and TEM observations. From all of the sequential mixing methods used, powder–powder mixing leads to the most transparent nanocomposites. Cellulosic plastic-based nanocomposites obtained using increased pre-plasticizing times and RT showed better exfoliated structures. In the system containing compatibilizer, the minimum retention time required for obtaining almost completely exfoliated hybrid nanocomposites was shorter than in the system without compatibilizer.     

Enumeration of methanogens with a focus on fluorescence in situ hybridization

Methanogens, the members of domain Archaea are potent contributors in global warming. Being confined to the strict anaerobic environment, their direct cultivation as pure culture is quite difficult. Therefore, a range of culture-independent methods have been developed to investigate their numbers, substrate uptake patterns, and identification in complex microbial communities. Unlike other approaches, fluorescence in situ hybridization (FISH) is not only used for faster quantification and accurate identification but also to reveal the physiological properties and spatiotemporal dynamics of methanogens in their natural environment. Aside from the methodological aspects and application of FISH, this review also focuses on culture-dependent and -independent techniques employed in enumerating methanogens along with associated problems. In addition, the combination of FISH with micro-autoradiography that could also be an important tool in investigating the activities of methanogens is also discussed.