Assessment of biological and biochemical indicators in soil under transgenic Bt and non-Bt cotton crop in a sub-tropical environment

There is concern that transgenic Bt-crops carry genes that could have undesirable effects on natural and agro-ecosystem functions. We investigated the effect of Bt-cotton (expressing the Cry 1Ac protein) on several microbial and biochemical indicators in a sandy loam soil. Bt-cotton (MRC-6301Bt) and its non-transgenic near-isoline (MRC-6301) were grown in a net-house on a sandy clay loam soil. Soil and root samples were collected 60, 90, and 120 days after sowing. Soil from a control (no-crop) treatment was also included. Samples were analysed for microbial biomass C, N and P (MBC, MBN, MBP), total organic carbon (TOC), and several soil enzyme activities. The microbial quotient (MQ) was calculated as the ratio of MBC-to-TOC. The average of the three sampling events revealed a significant increase in MBC, MBN, MBP and MQ in the soil under Bt-cotton over the non-Bt isoline. The TOC was similar in Bt and non-Bt systems. Potential N mineralization, nitrification, nitrate reductase, and acid and alkaline phosphatase activities were all higher in the soil under Bt-cotton. Root dry weights were not different (P > 0.05), but root volume of Bt-cotton was higher on 90 and 120 days than that of non-Bt cotton. The time of sampling strongly affected the above parameters, with most being highest on 90 days after sowing. We concluded from the data that there were some positive or no negative effects of Bt-cotton on the studied indicators, and therefore cultivation of Bt-cotton appears to be no risk to soil ecosystem functions.     

Assessment and spatial distribution of groundwater quality in industrial areas of Ghaziabad, India

An attempt has been made in this study to evaluate the groundwater quality in two industrial blocks of Ghaziabad district. Groundwater samples were collected from shallow wells, deep wells and hand pumps of two heavily industrialized blocks, namely Bulandshahar road industrial area and Meerut road industrial area in Ghaziabad district for assessing their suitability for various uses. Samples were collected from 30 sites in each block before and after monsoon. They were analyzed for a total of 23 elements, namely, Ag, Al, As, B, Ba, Be, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, P, Pb, Se, U, V, and Zn. In addition to these elements, some other parameters were also studied viz: color, odor, turbidity, biological oxygen demand, chemical oxygen demand (COD), dissolved oxygen, total dissolved solids and total suspended solid. The water quality index was also calculated based on some of the parameters estimated. Out of the 23 elements, the mean values of 12 elements, namely, Al, As, Ca, Cd, Cr, Mg, Mn, Na, Ni, Pb, Se, and U, were higher than the prescribed standard limits. The concentrations (in milligram per liter) of highly toxic metals viz., Al, As, Cd, Cr, Ni, Pb, Se, and U, ranged from 1.33–6.30, 0.04–0.54, 0.005–0.013, 4.51–7.09, 0.14–0.27, 0.13–0.32, 0.16–2.11, and 0.10–1.21, respectively, in all groundwater samples, while the permissible limits of these elements as per WHO/BIS standards for drinking are 0.2, 0.01, 0.003, 0.05, 0.07, 0.01, 0.04, and 0.03 mg L^?1, respectively. The EC, pH, and COD in all samples varied from 0.74–4.21, 6.05–7.72, and 4.5–20.0 while their permissible limits are 0.7 dS m^?1, 6.5–8.5, and 10 mg L^?1, respectively. On the basis of the above-mentioned parameters, the water quality index of all groundwater samples ranged from 101 to 491, and 871 to 2904 with mean value of 265 and 1,174 based on two criteria, i.e., physico-chemical and metal contaminations, respectively while the prescribed safe limit for drinking is below 50. The results revealed that the groundwater in the two blocks is unfit for drinking as per WHO/BIS guidelines. The presence of elements like As, Se, and U in toxic amounts is a matter of serious concern.     

Degradation of tannic acid by cold-adapted <Emphasis Type="BoldItalic">Klebsiella</Emphasis> sp NACASA1 and phytotoxicity assessment of tannic acid and its degradation products

Background, aim, and scope  

The focus of the present study is to know the potential of bacterial isolate for tannic acid degradation at low temperature. Also, we tried to evaluate the suitability of phytotoxicity testing protocol for the determination of tannic acid toxicity.     

Processability and Biodegradability Evaluation of Composites from Poly(butylene succinate) (PBS) Bioplastic and Biofuel Co-products from Ontario

This study investigates the processability and biodegradability of composite bioplastic materials. Biocomposites were processed using twin-screw compounding of the bioplastic poly(butylene succinate) (PBS) with bio-based fillers derived from co-products of biofuel production. An extensive biodegradability evaluation was conducted on each biocomposite material, as well as the base materials, using respirometric testing to analyze the conversion of organic carbon into carbon dioxide. This evaluation revealed that the presence of meal-based fillers in the biocomposites increased the rate of biodegradation of the matrix polymer, degrading at a faster pace than both the pure PBS polymer and the switchgrass (SG) composite. This degradation was further confirmed using FT-IR and thermal analysis of the material structure before and after biodegradation. The increased biodegradation rate is attributed to the high concentration of proteins in the meal-based composites, which enhanced the hydrolytic biodegradation of the material and facilitated micro-organism growth. The SG-based composite degraded slower than the pure polymer due to its lignin content, which degrades via a different mechanism than the polymer, and slowed the biodegradation process.     

Biodegradable Blends from Corn Gluten Meal and Poly(butylene adipate-co-terephthalate) (PBAT): Studies on the Influence of Plasticization and Destructurization on Rheology,Tensile Properties and Interfacial Interactions

Melt extrusion was used to obtain thermoplastic corn gluten meal (tCGM) blends from plasticized corn gluten meal (pCGM) and poly(butylene adipate-co-terephthalate) (PBAT). Dynamic rheological tests, morphology and spectroscopy were employed to understand the effect of the plasticization and destructurization of corn gluten meal (CGM) on tCGM blends. Rheological data showed a plateau in the low frequencies for tCGM blends demonstrating network formation which responds elastically over long timescales. Also, complex viscosity data showed the existing of shear thinning for PBAT and PBAT–CGM blend. Furthermore, rheology and morphology showed the synergistic influence of plasticization and destructuralization of CGM on the phase structure development of the blends. In addition, it was found for unmodified CGM–PBAT blend there was significant frequency dependence for G′ indicating it just acted as filler for PBAT matrix. FTIR studies showed that the urea has helped in unfolding the corn protein and facilitated hydrogen bonding interactions with PBAT. Tensile properties showed an improvement in tCGM blends when compared unmodified CGM blend. Tensile strength of tCGM blends was almost same as that of the neat PBAT matrix. Percent elongation, a strong reflection of the state of interface in the blends has showed higher values, indicating strong interactions between the PBAT and pCGM in the blend system.     

Novel Biodegradable Cast Film from Carbon Dioxide Based Copolymer and Poly(Lactic Acid)

Poly(lactic acid) (PLA) and poly(propylene carbonate) (PPC) blends with different levels of chain extender were prepared and cast into films. The effect of chain extender on the mechanical, thermal and barrier properties of the films were investigated. With the inclusion of the chain extender, the compatibility and interfacial adhesion between the two polymer phases were significantly improved by a mean of forming a PLA–chain extender–PPC copolymer. Reactions between the chain extender, PLA and PPC were observed through FTIR study. SEM study also confirmed the improved compatibility and interfacial adhesion. The elongation at break of the compatibilized film with optimal amount of chain extender showed dramatic increase by up to 1940 %. DSC studies revealed that chain extender hindered the crystallization of the film which explained the decrease in both water and oxygen barrier when adding chain extender. PLA was found to be able to enhance both oxygen and water barrier of the blend as compared to neat PPC, while in the case of the blend with chain extender, oxygen and water barrier properties exhibited reduction at the beginning. However, when increasing chain extender concentration, these two barrier performance exhibited an upward trend. It was found that PLA/PPC blend showed much better oxygen barrier property than both parent polymers, which can be ascribed to the acceleration effect of PPC on the crystallization of PLA.     

Minimizing changing climate impact on buildings using easily and economically feasible earth to air heat exchanger technique

The biggest challenge of the 21st century is to satisfy the escalating demand of energy and minimize the globally changing climate impact. Earth to air heat exchanger (EAHE) system can effectively reduce heating affects on buildings. An experimental study was carried out by designing EAHE system using low cost building materials like Bamboo (Bambuseae) and hydraform (cement and soil plaster) to reduce the energy consumption of buildings and minimize the impact of climate change. This system utilizes earth’s constant subterranean temperature for naturally heating or cooling the inlet air. This study was carried out in the North Eastern part of India. An open loop EAHE system was developed to predict the heating and cooling potential of the system. Within the system locally available bamboos were used for constructing the tunnel pipes and soil-cement mixture plaster was used to enhance the conductivity of the bamboo pipes. Soil-cement mixtures are capable of decreasing the humidity by 30 to 40 %. Majority of the North Eastern region of India, have humid climatic conditions through out the year. Experiment was performed continuously for 7 days and the result shows that irrespective to the inlet air temperature (ranges from 35 °C to 42 °C), outlet air temperature was recorded between 25 °C and 26 °C, which shows the effectiveness of the system. After a series of experimental analysis the study reveals that underground tunnel based fresh air delivery system is one of the easily feasible and economically feasible techniques which can drastically reduce the energy consumption of the buildings and help in addressing the continuously escalating demand of power and minimizing the impact of changing climatic conditions on buildings.     

Climate change impact, mitigation and adaptation strategies for agricultural and water resources, in Ganga Plain (India)

Agriculture consumes more than two-thirds of global fresh water out of which 90 % is used by developing countries. Freshwater consumption worldwide is expected to rise another 25 %by 2030 due to increase in population from 6.6 billion currently to about 8 billion by 2030 and over 9 billion by 2050. Worldwide climate change and variability are affecting water resources and agricultural production and in India Ganga Plain region is one of them. Hydroclimatic changes are very prominent in all the regions of Ganga Plain. Climate change and variability impacts are further drying the semi-arid areas and may cause serious problem of water and food scarcity for about 250 million people of the area. About 80 million ha out of total 141 million ha net cultivated area of India is rainfed, which contributes approximately 44 % of total food production has been severely affected by climate change. Further changing climatic conditions are causing prominent hydrological variations like change in drainage density, river morphology (tectonic control) & geometry, water quality and precipitation. Majority of the river channels seen today in the Ganga Plain has migrated from their historic positions. Large scale changes in land use and land cover pattern, cropping pattern, drainage pattern and over exploitation of water resources are modifying the hydrological cycle in Ganga basin. The frequency of floods and drought and its intensity has increased manifold. Ganga Plain rivers has changed their course with time and the regional hydrological conditions shows full control over the rates and processes by which environments geomorphically evolve. Approximately 47 % of total irrigated area of the country is located in Ganga Plain, which is severely affected by changing climatic conditions. In long run climate change will affect the quantity and quality of the crops and the crop yield is going to be down. This will increase the already high food inflation in the country. The warmer atmospheric temperatures and drought conditions will increase soil salinization, desertification and drying-up of aquifer, while flooding conditions will escalate soil erosion, soil degradation and sedimentation. The aim of this study is to understand the impact of different hydrological changes due to climatic conditions and come up with easily and economically feasible solutions effective in addressing the problem of water and food scarcity in future.     

Nanoscale materials as sorbents for nitrate and phosphate removal from water

Excessive nitrogen (N) and phosphorous (P) release into run-off waters from human activities is a major cause of eutrophication. Several techniques are available to remove N and P-containing pollutants, such as chemical precipitation, biological treatment, membrane processes, electrolytic treatment, ion-exchange and adsorption. In order to remove low concentration levels of nitrate and phosphate, adsorption is a cost-effective solution. In this review, we present a list of nanoscale adsorbents such as zero-valent metal, metal oxides/metal hydroxides, and carbon-based materials. We discuss their adsorption capacities, isotherms, kinetics and mechanisms.     

Development and Evaluation of a Continuous Coarse (PM10–PM25) Particle Monitor

ABSTRACT

In this paper, we describe the development and laboratory and field evaluation of a continuous coarse (2.5-10 um) particle mass (PM) monitor that can provide reliable measurements of the coarse mass (CM) concentrations in time intervals as short as 5-10 min. The operating principle of the monitor is based on enriching CM concentrations by a factor of ~25 by means of a 2.5-um cut point round nozzle virtual impactor while maintaining fine mass (FM)—that is, the mass of PM_{2 5} at ambient concentrations. The aerosol mixture is subsequently drawn through a standard tapered element oscillating microbalance (TEOM), the response of which is dominated by the contributions of the CM, due to concentration enrichment. Findings from the field study ascertain that a TEOM coupled with a PM₁₀ inlet followed by a 2.5-um cut point round nozzle virtual impactor can be used successfully for continuous CM concentration measurements. The average concentration-enriched CM concentrations measured by the TEOM were 26-27 times higher than those measured by the time-integrated PM₁₀ samplers [the micro-orifice uniform deposit