Thermal, Mechanical and Rheological Behavior of Poly(lactic acid)/Talc Composites

In the present study, influence of talc on thermal, mechanical and rheological behavior of PLA is investigated and the structure?Cproperty correlation for the PLA/talc composites is established. Poly(lactic acid)/talc composites are prepared by melt mixing of PLA with talc in twin screw extruder followed by blown film processing. Various characterizations techniques are used to evaluate thermal, morphological, mechanical and rheological behavior of PLA/talc composites and its blown film. DSC analysis showed that degree of crystallinity of PLA/talc composites was higher than that of neat PLA because of nucleating ability of talc. Spherulite morphology of PLA/talc composites showed that talc has increased nucleation density of spherulite having smaller radius than that of neat PLA. Talc is effective in enhancing tensile modulus and storage modulus of PLA due to reinforcing ability of talc particles.     

Synthesis of isotopically modified ZnO nanoparticles and their potential as nanotoxicity tracers

Understanding the behavior of engineered nanoparticles in the environment and within organisms is perhaps the biggest obstacle to the safe development of nanotechnologies. Reliable tracing is a particular issue for nanoparticles such as ZnO, because Zn is an essential element and a common pollutant thus present at elevated background concentrations. We synthesized isotopically enriched (89.6%) with a rare isotope of Zn (⁶⁷Zn) ZnO nanoparticles and measured the uptake of ⁶⁷Zn by L. stagnalis exposed to diatoms amended with the particles. Stable isotope technique is sufficiently sensitive to determine the uptake of Zn at an exposure equivalent to lower concentration range (<15 μg g⁻¹). Without a tracer, detection of newly accumulated Zn is significant at Zn exposure concentration only above 5000 μg g⁻¹ which represents some of the most contaminated Zn conditions. Only by using a tracer we can study Zn uptake at a range of environmentally realistic exposure conditions.     

Removal of hexavalent chromium from contaminated ground water using zero-valent iron nanoparticles

Batch experiments were conducted on ground water samples collected from a site contaminated with Cr(VI) to evaluate the redox potential of zero-valent iron (Fe⁰) nanoparticles for remediation of Cr(VI)-contaminated ground water. For this, various samples of contaminated ground water were allowed to react with various loadings of Fe⁰ nanoparticles for a reaction period of 60 min. Data showed 100% reduction of Cr(VI) in all the contaminated ground water samples after treatment with 0.20 gL⁻¹ of Fe⁰ nanoparticles. An increase in the reduction of Cr(VI) from 45% to 100% was noticed with the increase in the loading of Fe⁰ nanoparticles from 0.05 to 0.20 gL⁻¹. Reaction kinetics of Cr(VI) reduction showed pseudo first-order kinetics with rate constant in the range of 1.1 × 10⁻³ to 3.9 × 10⁻³ min⁻¹. This work demonstrates the potential utility of Fe⁰ nanoparticles in treatment and remediation of Cr(VI)-contaminated water source.     

Development and demonstration of a free surface flow-dependent sampling technology

Statistical assessment of water quality data, obtained at the South Florida Water Management District (West Palm Beach, Florida) S-65E structure, illustrated significant differences and inconsistency in nutrient concentrations (Daas and Ebadian, 2003). The evaluation showed that currently used water sampling techniques are inadequate because of deficiencies in functionality and sensitivity to flow conditions at the structure. Moreover, the study indicated the need for a more precise sampling technology, which would consider variations in the velocity profile across the water column during the sampling process. Therefore, a new prototype sampling technology was designed and tested in a pilot open channel. The new sampler had the capability to collect discrete aliquot volumes of water samples that are proportional to the corresponding point velocity at each of these depths. The discrete aliquot volumes were blended to provide an integrated sample that captures the variations in the velocity profile.     

Particle concentrations in data centers

Cooling buildings with large airflow rates of outside air when temperatures are favorable is an established energy-saving measure. In data centers, this strategy is not widely used, owing to concerns that it would cause increased indoor levels of particles of outdoor origin, which could damage electronic equipment. However, environmental conditions typical of data centers and the associated potential for equipment failure are not well characterized. This study presents the first published measurements of particle concentrations in operating data centers. Indoor and outdoor particle measurements were taken at eight different sites in northern California for particulate matter 0.3–5.0 μm in diameter. One of the data centers has an energy-efficient design that employs outside air for cooling, while the rest use conventional cooling methods. Ratios of measured particle concentrations in the conventional data centers to the corresponding outside concentrations were significantly lower than those typically found in office or residential buildings. Estimates using a material-balance model match well with empirical results, indicating that the dominant particle sources and losses have been identified. Measurements taken at the more energy-efficient site show nearly an order of magnitude increase in particle concentration when ventilation rates were high. The model indicates that this increase may be even higher when including particles smaller than the monitoring-equipment size limitation. Even with the increases, the measured particle concentrations are still below concentration limits recommended in industry standards.     

Limnochemistry and nutrient dynamics in Upper Lake, Bhopal, India

In limnetic ecosystem, water quality depends upon physical, chemical, and biological factors. Effects of temperature, light scattering, and absorption by suspended and dissolved matter, transport, and mixing of nutrients within the lake are the significant factors as far as water quality is concerned. Nutrient loading into the lake and internal cycling of nutrients is always a matter of concern and critical to number of processes. During the winter season, heat and momentum transfer at the lake surface and the temperature-density relation of water destabilize the water column and drive vertical mixing and transport processes. The deepening of the surface layer produces nutrient transfer from the hypolimnion into the euphotic zone of epilimnion. It may also resuspend sediments that would have settled under stratified conditions, or redistribute particles that may still be in suspension. Thus, there exists a complex connection between the hydrodynamics and water quality issues. Present study is an effort to understand how seasonal changes in the limnetic ecosystem regulate the limnochemistry and movement of nutrient. The study revealed that significant variations of nutrients and organic load were observed between epilimnion and hypolimnion during summer season, and the lake was found in hyper-eutrophic condition throughout the study period.     

Sorption kinetics and leachability of heavy metal from the contaminated soil amended with immobilizing agent (humus soil and hydroxyapatite)

Release of heavy metals onto the soil as a result of agricultural and industrial activities may pose a serious threat to the environment. This study investigated the kinetics of sorption of heavy metals on the non-humus soil amended with (1:3) humus soil and 1% hydroxyapatite used for in situ immobilization and leachability of heavy metals from these soils. For this, a batch equilibrium experiment was performed to evaluate metal sorption in the presence of 0.05 M KNO(3) background electrolyte solutions. The Langmuir isotherms applied for sorption studies showed that the amount of metal sorbed on the amended soil decreased in the order of Pb(2+)>Zn(2+)>Cd(2+). The data suggested the possibility of immobilization of Pb due to sorption process and immobilization of Zn and Cd by other processes like co-precipitation and ion exchange. The sorption kinetics data showed the pseudo-second-order reaction kinetics rather than pseudo-first-order kinetics. Leachability study was performed at various pHs (ranging from 3 to 10). Leachability rate was slowest for the Pb(2+) followed by Zn(2+) and Cd(2+). Out of the metal adsorbed on the soil only 6.1-21.6% of Pb, 7.3-39% of Zn and 9.3-44.3% of Cd leached out from the amended soil.     

Induction of cytochrome P-450 and phosphatidylcholine synthesis by endosulfan in liver of rats: effect of quality of dietary proteins

Administration of endosulfan significantly increased microsomal protein, cytochrome P-450 content and the activity of aminopyrine N-demethylase. Effect of endosulfan and actinomycin D either alone or together on microsomal protein, cytochrome P-450, NADPH cytochrome c reductase, aniline hydroxylase, aminopyrine N-demethylase, phosphatidylcholine content, incorporation of 3H-choline and 14C-methionine were studied in rats given amino acid deficient and supplemented diets. Administration of endosulfan significantly increased the above parameters in both the dietary groups, whereas administration of actinomycin D did not have any effect in rats fed supplemented diets, however, significant decrease in the PC and the incorporation of choline and methionine into PC of rats fed deficient diet were observed. A positive correlation in the effect of endosulfan on hepatic mixed function oxidase activity and hepatic phosphatidylcholine is observed.