Synthesis and characterization of drinking water treatment plant sludge-incorporated Portland cement

Kinetic analysis of thermally activated phase transformations in drinking water treatment plant (DWTP) sludge suggests its applicability in the materials of construction. The suggested prediction has already been verified on the sludge-based bricks. The present study deals with incorporating the same sludge in the raw meal for the synthesis of Portland cement clinkers. For this purpose, two raw meals are prepared with varying sludge loadings. The sludge effect on reactivity of the crude mixture is evaluated on the basis of the free lime content sintered at various elevated temperatures. The results of chemical and mineralogical and scanning electron microscopic analyses reveal fine mineralogical contents of Portland clinkers calcined at 1450 and 1500 °C. Moreover, the cements prepared from these clinkers by the introduction of certain proportions of gypsum, depict significant durability. The obtained results elucidate that the studied DWTP sludge-incorporated Portland cement shows considerable potential to be commercialized.     

Aluminum interaction with human brain tau protein phosphorylation by various Kinases

Abstract

Phosphorylation is an indispensable process for energy and signal transduction in biological systems. AlCl₃ at 10 nM to 10 uM range activated in‐vitro [γ‐³²P)ATP phosphorylation of the brain (tau) T protein in both normal human or E.coli expressed T forms; in the presence of the kinases P34, PKP, and PKC. However, higher concentrations of ALCl₃ inhibited the T phosphorylation with P34, PKP, and PKC to a maximum at 1 mM level. AlCl₃ at 100 uM to 500 uM range induced non‐enzymatic phosphorylation of T with γ‐ATP, γ‐GTP, and α‐GTP. AlCl₃ activated histone phosphorylation by P34 in a similar pattern. The hyperphosphorylation of T by Al³⁺ was accompanied by molecular shift and mobility retardation in SDS‐PAGE. This may demonstrate the mechanism of the longterm neurological effect of Al³⁺ in human brain leading to the formation of the neurofibrillary tangles related to Alzeheimer's disease.     

Sequential UV-biological degradation of chlorophenols

The sequential UV-biological degradation of a mixture of 4-chlorophenol (CP), 2,4-dichlorophenol (DCP), 2,4,6-trichlorophenol (TCP), and pentachlorophenol (PCP) was first tested with each pollutant supplied at an initial concentration of 50 mg l(-1). Under these conditions, the chlorophenols were photodegraded in the following order of removal rate: PCP>TCP>DCP>CP with only CP and DCP remaining after 40 h of irradiation. The remaining CP (41 mg l(-1)) and DCP (13 mg l(-1)) were then completely removed by biological treatment with an activated sludge mixed culture. Biodegradation did not occur in similar tests conducted with a non-irradiated mixture due to the high microbial toxicity of the solution. UV treatment lead to a significant reduction of the phytotoxicity to Lipedium sativum but no further reduction of phytotoxicity was observed after biological treatment. Evidence was found that the pollutants were partially photodegraded into toxic and non-biodegradable products. When the pollutants were tested individually (initial concentration of 50 mg l(-1)), PCP, TCP, DCP, 4-CP were photodegraded according to first order kinetic model (r2>99) with half-lives of 2.2, 3.3, 5.7, and 54 h, respectively. The photoproducts were subsequently biodegraded. This study illustrates the potential of UV as pre-treatment for biological treatment in order to remove toxicity and enhance the biodegradability of organic contaminants. However, it also shows that UV treatment must be carefully optimized to avoid the formation of toxic and/or recalcitrant photoproducts and results from studies conducted on single contaminants cannot be extrapolated to mixtures.     

HYDROLOGICAL,METEOROLOGICAL, AND AGRICULTURAL RELATIONS IN NORTHERN IRAQ1

ABSTRACT: The northern regions of Iraq, an area comprised of mountains and undulating plains, has for centuries been the main granary for the country. Its agricultural production is largely dependent upon natural rainfall which ranges from about 300 to 1,000 mm/yr. Grain yields can be greatly improved by use of improved varieties and management practices. Equations are developed to show relationships between various hydrologic and meteorologic parameters with yields of wheat and barley. The amount of supplementary water needed to maximize grain yields is also shown.     

Long-Term Maintenance of Rapid Atrazine Degradation in Soils Inoculated with Atrazine Degraders

Two different microbial communities able to degrade atrazine (atz) were inoculated in four different soils. The most critical factor affecting the success of inoculation was the soil pH and its organic matter (OM) content. In two alkaline soils (pH > 7), some inoculations led immediately to a strong increase of the biodegradation rate. In a third slightly acidic soil (pH = 6.1), only one inoculum could enhance atz degradation. In a soil amended with organic matter and straw (pH = 5.7, OM = 16.5%), inoculation had only little effect on atz dissipation on the short as well as on the long-term. Nine months after the microflora inoculations, atz was added again and rapid biodegradation in all alkaline inoculated soils was recorded, indicating the long-term efficiency of inoculation. In these soils, the number of atz degraders was estimated at between 6.5 × 10³ and 1.5 × 10⁶ (g of soil)^-1, using the most probable number (MPN) method. Furthermore, the presence of the atz degraders was confirmed by the detection of the gene atzA in these soils. Denaturing gradient gel electrophoresis (DGGE) analysis of the 16S rDNA genes indicated that the inoculated bacterial communities had little effect on the patterns of the indigenous soil microflora.     

Search and rescue in collapsed structures: engineering and social science aspects

This paper discusses the social science and engineering dimensions of search and rescue (SAR) in collapsed buildings. First, existing information is presented on factors that influence the behaviour of trapped victims, particularly human, physical, socioeconomic and circumstantial factors. Trapped victims are most often discussed in the context of structural collapse and injuries sustained. Most studies in this area focus on earthquakes as the type of disaster that produces the most extensive structural damage. Second, information is set out on the engineering aspects of urban search and rescue (USAR) in the United States, including the role of structural engineers in USAR operations, training and certification of structural specialists, and safety and general procedures. The use of computational simulation to link the engineering and social science aspects of USAR is discussed. This could supplement training of local SAR groups and USAR teams, allowing them to understand better the collapse process and how voids form in a rubble pile. A preliminary simulation tool developed for this purpose is described.     

Green sol–gel synthesis of novel nanoporous copper aluminosilicate for the eradication of pathogenic microbes in drinking water and wastewater treatment

Environmental Science and Pollution Research - We used a green sol–gel synthesis method to fabricate a novel nanoporous copper aluminosilicate (CAS) material. Nanoporous CAS was characterized...     

An experimental and a numerical study of horizontal earth-air heat exchanger in a hot climate

Earth-air heat exchangers (EAHE) are devices used in the geothermal technique in order to reduce energy consumption in buildings. In this study, a simulation was conducted through the computational fluid dynamics platform FLUENT 6.3 for the prediction of thermal performance of the EAHE that describes the variation of the air temperature inside the tube. For this, it was necessary to design the heat exchanger while respecting the design and the actual dimensions of the experimental set-up, and stating that the temperature of the wall of the horizontal tube of the exchanger is equal to that of ground at 3 m depth. It should be noted that in assessing the temperature along the two sections vertical (input and output) of the exchanger, opting for a function (UDF) the user define function. Finally, noting a good agreement between both experimental and numerical study, and showing that a significant reduction in temperature at the outlet of the exchanger to a difference of 20 °C, confirming the effectiveness of the heat exchanger.     

Androgens,oestrogens, and progesterone concentrations in wastewater purification processes measured with capillary electrophoresis

A novel analytical-scale concept to improve reliability of detection and analysis of natural and processed wastewater samples from a purification plant was developed. A sequential sample clean-up system of polymer-based octadecyl and silane-based quaternary amine sorbents were used for concentrating human based steroid hormones and their metabolites and detecting them by UV absorption with capillary electrophoresis (CE). The water samples were collected from influent and effluent processes of the water purification plant in Helsinki, Finland.The CE methods were partial-filling micellar electrokinetic chromatography and capillary zone electrophoresis. The analysis times and method concentration levels were optimized with eight steroids at the range of 0.5–10 mg/L. Since in CE the detectable quantities were higher than the existing amounts in the process waters, the real samples needed matrix removal combined with steroid enrichment. After 20,000-fold concentration testosterone-glucoside, androstenedione, progesterone, and estradiol-glucoside could be determined in the process water samples. The amounts of individual steroids in influent and effluent waters were 0–429 and 0–207 ng/L, respectively. Correspondently, their total amounts were 735 and 212 ng/L with excellent in day and inter-day repeatability. The RSD values were less than 1, 9.7, and 19% in repeated analyses, calculated from 60 analyses during 24 h, and from 130 analyses during 15 months, respectively. The steroid removal in purification process was 65% on average. The solid particles separated in three steps during the water clean-up concept contained 9.8–45 ng/g steroids in combined dry precipitates.