Catalytic gasification of coal using eutectic salts: recovery,regeneration, and recycle of spent eutectic catalysts

Catalyst recovery studies were conducted for gasified chars produced from steam gasification of Illinois #6 coal catalyzed with two different catalyst systems. A ternary (43.5 mol% Li2CO3-31.5 mol% Na2COr-25 mol% K2CO3) and a binary (29 mol% Na2CO3-71 mol% K2CO3) eutectic catalyst system were used for gasifying coal. Various extraction schemes, such as water extraction, H2SO4 extraction, and acetic acid extraction, were evaluated with respect to their extraction efficiencies. Effects of major process variables, such as solvent-to-char ratio, mixing time, temperature, and concentration, on the extraction efficiency were evaluated. A process schematic for the entire catalyst recovery, regeneration, and recycle scheme was developed and the preliminary process economics were determined based on these extraction schemes. H2SO4 extraction was found to be the most desirable. It also turned out to be more attractive than a once-through throwaway system.     

Experimental investigation on the effect of liquid phase and vapor phase separation over performance of falling film evaporator

Energy, cost, and environmental concerns play a vital role in understanding governing parameters of distributor design in falling film evaporators. Distributor design is a hidden parameter in many experimental papers. The uniform distribution of liquid refrigerant over the tube bundle mostly depends on two-phase liquid refrigerant and vapor refrigerant. This work conducted experiments with two distribution systems with and without separation of liquid-vapor refrigerant after expansion valve for the same evaporator capacity with R134a as a refrigerant. Results reveal that; separating vapor refrigerant has a positive impact on the approach of the evaporator with an open system distributor arrangement. The highest delta T and lowest practice are found at a heat flux of 13.97 kW/m² with an available system distributor compared to a closed system with a heat flux of 14.25 kW/m². The open system arrangement in the distributor is the novel parameter for distributor design, ensuring uniform distribution with minimum pressure drop and dry suction. An open system distributor has an average 16.1% capacity increase over a closed system. The experimental analysis helps to understand different parameters for the design of distributors in falling film evaporators for uniform distribution.     

Criteria and indicators for a bioenergy production industry identified via stakeholder participation

As bioenergy production expands and new bioenergy-based technologies emerge, there is a growing concern regarding the sustainability of their ecological and socioeconomic impacts. Comprehensive sustainability assessments are needed to address this concern and to assure that the development of the bioenergy industry meets sustainability goals. Most sustainability assessments for bioenergy are expert-driven, broad, and largely motivated by an interest in optimizing international trade in bioenergy. As a result, social and cultural sustainability targets are vague or underdeveloped. In this study, we developed a sustainability assessment for a regional bioenergy production industry in Upper Michigan, using stakeholder participation. Semi-structured interviews and focus group meetings were used to elicit participants’ concerns and opinion. These concerns were translated into sustainability Criteria and Indicators (C&Is), many of which could be supported with available science. Some of the C&Is identified by participants were unique to the region. Sustainability C&Is were broadly categorized into economic (C = 5; I = 22), environmental (C = 6; I = 12), social (C = 3; I = 9), policy and regulations (C = 3; I = 13), and institutional capacity (C = 4; I = 13). While participants could identify indicators for most of the criteria (many of which are also supported by existing literature), further research and validation will be necessary to identify measurable, practical, and bias-free indicators for all criteria.     

Preliminary economic analysis of poultry litter gasification option with a simple transportation model

Several environmental issues are related to the disposal of poultry litter. In an effort to provide a more environmentally friendly alternative than landfill disposal or spreading as a soil amendment, work has been carried out previously at the University of Tennessee Space Institute (UTSI). This past UTSI work was concentrated on developing a catalytic steam gasification concept to produce energy from poultry litter. In the past UTSI studies, preliminary design and economics for a stationary, centralized gasification plant capable of processing approximately 100 ton/day of poultry litter were developed. However, in this preliminary design the economic impact of transporting litter to a centralized gasification plant location was not addressed. To determine the preliminary impact of transporting the poultry litter on the overall economics of this energy conversion plant design, a simple transportation model was developed. This model was used in conjunction with the earlier plant design prepared at UTSI to determine the economic feasibility of a centralized, stationary poultry litter gasification plant. To do so, major variables such as traveling distance, plant feed rate (or capacity), fluctuations in the sales price of the product gas (that means value of the energy), population density of poultry farms, impact of tipping fees, and cost of litter were varied. The study showed that for plant with a capacity of 1000 ton/day to be able to withstand several changes in economic conditions and sustain itself, the poultry farm density would need to be approximately 0.3 houses/mi2. Smaller plants would need either a higher energy price or some kind of subsidy to be economically feasible.     

Effect of fabricated V-rib roughness experimentally investigated in a rectangular channel of solar air heater: a comprehensive review

Environmental Science and Pollution Research - Solar power is one of the main sources of renewable energy which helps for protecting the environmental and reducing pollution. Technologies and...     

The recent occurrence of exotic freshwater fishes in the tributaries of river Ganga basin: abundance, distribution, risk, and conservation issues

We record here the recent occurrence, abundance and distribution of six exotic fish species, viz. Oreochromis mossambicus, Cyprinus carpio, Hypopthalmicthys molitrix, Ctenopharyngodon idellus, Clarias gariepinus, and Pterygoplichthys disjunctivus (a new exotic in India) distributed through the four important tributaries of river Ganga basin in India. From the total catch, the abundance index of all exotic species in different rivers ranged from 1.1 to 14.5?% with highest value in River Gomti. The relative abundance of the exotic species in all the four tributaries demonstrated that a single species C. carpio contributed a considerable abundance (43.3?C83?%) than that of the remaining exotic fishes. The Common Carp, C. carpio, was ubiquitous in all the four tributaries of Ganges basin studied and had the highest local distribution (52.63?%). Smaller size groups of endangered (Chagunius chagunio, Chitala chitala, and Tor tor) and migratory species (Bagarius bagarius, Ompok pabda, Wallago attu, and Sperata aor) in the four tributaries were recorded, and the increasing appearance of Common Carp and other exotic fishes is signaling biological invasion. Possible threats to the indigenous fish fauna, as a result of the invasion and proliferation of these exotics, are discussed.     

Agro-economic evaluation of water resource project--a modeling approach

Feasibility of an irrigation project is evaluated by two criteria viz., reservoir capacity to irrigate its command area and economic returns by incremental crop production versus capital investment for dam construction. The annual water requirement of different crops in the command area is estimated and compared with the availability of water from the dam for irrigation purpose. The annual crop water requirement is estimated as the sum of evapotranspiration for crops and transmission and other losses. Evapotranspiration is estimated by modified Penman formula. Economics of crop production is analyzed by first estimating the monetary value of existing crop production under current rain fed conditions and then estimating the incremental production of irrigated command area for the proposed crop pattern. The proposed cropping pattern is prepared so as to maximize the benefit of crop production and fodder requirement while maintaining a better crop rotation to improve and maintain physical, chemical, and biological conditions of the soil. The dam is to be used for irrigation and water supply only. Command area served by this reservoir will be 76,500 ha. The existing annual agricultural return is Rs. 2995.56 lakhs and with the proposed irrigation scheme, it is estimated as Rs. 1,77,91.90 lakhs. The incremental annual return would be Rs. 1,47,96.35 lakhs i.e., 642.68% increase in annual return.     

Catalytic Gasification of Coal Using Eutectic Salts: Recovery,Regeneration, and Recycle of Spent Eutectic Catalysts

Abstract

Catalyst recovery studies were conducted for gasified chars produced from steam gasification of Illinois #6 coal catalyzed with two different catalyst systems. A ternary (43.5 mol% Li₂ CO₃ –31.5 mol% Na₂ CO₃ –25 mol% K₂ CO₃ ) and a binary (29 mol% Na₂ CO₃ –71 mol% K₂ CO₃ ) eutectic catalyst system were used for gasifying coal. Various extraction schemes, such as water extraction, H₂ SO₄ extraction, and acetic acid extraction, were evaluated with respect to their extraction efficiencies. Effects of major process variables, such as solvent-to-char ratio, mixing time, temperature, and concentration, on the extraction efficiency were evaluated. A process schematic for the entire catalyst recovery, regeneration, and recycle scheme was developed and the preliminary process economics were determined based on these extraction schemes. H₂ SO₄ extraction was found to be the most desirable. It also turned out to be more attractive than a once-through throwaway system.     

A critical review on different roughness geometries and their effect on heat transfer and friction factor

Solar air heater (SAH) is simple and the greatest effective approach to utilize and convert solar energy into thermal energy for heating utilizations. The employment of artificial roughness under side of the observer surface is the key technique for augmenting heat transfer with minimal friction factor penalty. Current paper summarized different kinds of artificial roughness used in SAH, which augments its performance. In this review article, 96 research papers are cited, which provide detailed information about the effect of different geometrical parameters on heat transfer and friction factor. This paper also brings the information about the optimum roughness parameters and heat transfer and friction factor correlation developed by different investigators in tabular form. Optimum roughness parameters and empirical correlations are used for comparative analysis of heat transfer, friction factor, and thermo-hydraulic performance parameter (THPP) of different roughness geometries. The best performing roughness geometry is reported on the basis of comparative analysis. Mathematical model is developed for predicting the thermal efficiency (η_th) of roughened SAH duct.