Validation of an in situ solidification/stabilization technique for hazardous barium and cyanide waste for safe disposal into a secured landfill

The aim of the present study was to devise and validate an appropriate treatment process for disposal of hazardous barium and cyanide waste into a landfill at a Common Hazardous Waste Treatment Storage Disposal Facility (CHWTSDF). The waste was generated during the process of hardening of steel components and contains cyanide (reactive) and barium (toxic) as major contaminants. In the present study chemical fixation of the contaminants was carried out. The cyanide was treated by alkali chlorination with calcium hypochlorite and barium by precipitation with sodium sulfate as barium sulfate. The pretreated mixture was then solidified and stabilized by binding with a combination of slag cement, ordinary Portland cement and fly ash, molded into blocks (5 × 5 × 5 cm) and cured for a period of 3, 7 and 28 days. The final experiments were conducted with 18 recipe mixtures of waste + additive:binder (W:B) ratios. The W:B ratios were taken as 80:20, 70:30 and 50:50. The optimum proportions of additives and binders were finalized on the basis of the criteria of unconfined compressive strength and leachability. The leachability studies were conducted using the Toxicity Characteristic Leaching Procedure. The blocks were analyzed for various physical and leachable chemical parameters at the end of each curing period. Based on the results of the analysis, two recipe mixtures, with compositions – 50% of [waste + (120 g Ca(OCl)₂ + 290 g Na₂SO₄) kg^?1 of waste] + 50% of binders, were validated for in situ stabilization into a secured landfill of CHWTSDF.     

Monitoring of Pathogenicity of Effluents from the UASB Based Sewage Treatment Plant

We researched the behavior of pathogenic microbes in a treated wastewater reuse system to acquire knowledge for establishing new standards for the reuse of treated wastewater. Based on the results that showed occasional growth of total coliforms but barely any growth of Escherichia coli in the supply tank, we found that the total coliform, which includes bacteria that also breed in the soil, etc., is not necessarily suitable as the index bacteria for indicating pollution by excrement. We also clarified that it is possible to decrease the heterotrophic plate count to a specified level in cases where combined residual chlorine is more than 0.3 mg/l, and that the standard value for residual chlorine should be set at 0.3 mg/l or more. At the same time, we found that applying sand filtration treatment to water used for toilet flushing, sprinkling and landscaping, and sand filtration treatment plus coagulation treatment to water for recreational use lowers the annual risk of infection by Cryptosporidium to less than 10⁻⁴. The standard for viruses must be examined in the future because Noroviruses were sometimes detected even in the reclaimed water, although we could not establish the standard at this time due to problems with the virus detection method.     

Dissipation studies of fentrazamide (YRC-2388) in soil under anaerobic condition

Dissipation of fentrazamide in soil and water under flooded (anaerobic) conditions was studied. Fentrazamide was applied to soil at 100 g ha(-1). Soil was extracted with 0.1 N HCl?:?acetone (1?:?1 v/v) followed by partition and cleanup with silica SPE. Separation was achieved in an ODS-II column with a mobile phase of acetonitrile?:?water (70?:?30 v/v) and detection at 214 nm. Recovery of fentrazamide varied from 75.2-90.4% and 89.9-97.8% in soil and water, respectively. Fentrazamide dissipated rapidly and fentrazamide residues were not detected after 100 and 35 days of application in soil and water, respectively. Half life in soil and water was 9.06 and 3.66 days, respectively. Dissipation followed monophasic first order kinetics pattern. No fentrazamide was detected in soil, rice grain and rice straw at harvest of crop. Calibration curves for quantification were linear and relative standard deviation (RSD) was 1.78%. LOD for instrument was 0.002 μg mL(-1) and LOQ for methods were 0.005 μg g(-1) for soil and water.     

Risk assessment of antibiotic residues in different water matrices in India: key issues and challenges

Global detection of antibiotic substances in water matrices has considerably increased in the recent past. However, in India research on this issue is limited or generalised in the literature. Risks associated with the presence of antibiotics in the environment can be quantified using a hazard quotient (HQ) approach. Here, HQs were developed using the measured environmental concentration (MEC) approach for antibiotic residues in Indian water matrices previously reported in the literature. In the present study, environmental risk assessment, using the HQ index [HQ?=?measured environmental concentration (MEC)/predicted no effect concentration (PNEC)] for different antibiotics, was performed according to the guidelines of European Medicine Evaluation Agency (EMEA). MEC and PNEC levels were obtained from the literature. PNEC values were also calculated from EC₅₀ using a safety factor when no PNECs were reported in the literature. HQs were obtained for industrial effluents (HQ?=?10⁴) that were greater than any previously reported values. Ciprofloxacin, a fluoroquinolone antibiotic, seemed to present the greatest risk in India. The HQ indices for Indian water matrices were in the following order: industrial effluents?>?lake water?>?river water?>?hospital effluents?>?treated sewage ? groundwater. A very high HQ represents a potential environmental concern for aquatic environments in India and demands that immediate attention be devoted to regulating these compounds, especially in pharmaceutical industrial wastewater.     

Contribution of anthropogenic aerosols in direct radiative forcing and atmospheric heating rate over Delhi in the Indo-Gangetic Basin

Introduction  

The present work is aimed to understand direct radiation effects due to aerosols over Delhi in the Indo-Gangetic Basin (IGB) region, using detailed chemical analysis of surface measured aerosols during the year 2007.     

Antioxidant role of ascorbic acid on oxidative stress induced by sub-acute exposure of lead and cypermethrin in erythrocytes of Wistar rats

This study aimed to evaluate the reparative potential of ascorbic acid (AA, 100 mg/kg, orally for 28 days) in sub-acute lead (Pb, 100 ppm in drinking water for 28 days) or cypermethrin (CPM, 50 mg/kg, orally in vehicle for 28 days) poisoning alone and as binary mixture on the basis of oxidative stress parameters in erythrocytes of Wistar rats. Both Pb and CPM produced significant increase in lipid peroxidation along with elevated glutathione-S-transferase and catalase activity individually but not as a binary mixture. Glutathione peroxidase activity was significantly increased but glutathione levels were significantly reduced irrespective of single or co-exposure while the activity of superoxide dismutase and erythrocytic protein content were not significantly affected. Co-exposure led to a comparatively lower level of oxidative stress than that induced by Pb or CPM alone indicating an antagonistic toxicodynamic profile in rat erythrocytes. Co-administration of AA along with Pb and/or CPM significantly restored the oxidative stress parameters to normal values. Overall results indicated that co-exposure induces a lower level of oxidative stress and AA ameliorates Pb- and/or CPM-induced oxidative damage in rat erythrocytes.     

Development and validation of a spectrophotometric method for soil adsorption study of malathion on three Indian soils

In view of the widespread use of pesticides in agriculture and its associated toxic effects on environment and human beings, the fate of these chemicals in soil is of major concern. The pesticide adsorption process is one of the major factors affecting its persistence and movement in the soil. With a view of studying the fate of malathion in soil, the adsorption of this insecticide was studied on three Indian soils by using batch equilibrium method. To carry out the adsorption study, a new simple, sensitive, and rapid method was developed, based on microwave-assisted alkaline hydrolysis of insecticide to the dimethyl dithiophosphate and its subsequent reaction with copper(I) perchlorate in acetonitrile. On mixing the reagents, a yellow color developed, which was stable for 120?min and was measured at 419?nm. The adsorption of malathion was studied by using Freundlich's adsorption equation and n _f values were observed less than 1 in all the soils. The leaching behavior of the insecticide was studied in terms of ground ubiquity score, which was below 1.8, classifying malathion as non-leacher pesticide, and hence it is not hazardous.     

Applications of natural polysaccharide-based beads for slow release herbicide formulation

This work deals with the use of polysaccharide-based beads for controlled release of the herbicide atrazine. This article discusses the release of the herbicide atrazine from neem-alginate-clay-based beads. Formulation characteristics such as entrapment efficiency, bead size, and diffusion mechanism for release of atrazine have been evaluated.     

Using interview surveys and multispecies occupancy models to inform vertebrate conservation

Species distribution data are an essential biodiversity variable requiring robust monitoring to inform wildlife conservation. Yet, such data remain inherently sparse because of the logistical challenges of monitoring biodiversity across broad geographic extents. Surveys of people knowledgeable about the occurrence of wildlife provide an opportunity to evaluate species distributions and the ecology of wildlife communities across large spatial scales. We analyzed detection histories of 30 vertebrate species across the Western Ghats biodiversity hotspot in India, obtained from a large-scale interview survey of 2318 people who live and work in the forests of this region. We developed a multispecies occupancy model that simultaneously corrected for false-negative (non-detection) and false-positive (misidentification) errors that interview surveys can be prone to. Using this model, we integrated data across species in composite analyses of the responses of functional species groups (based on disturbance tolerance, diet, and body mass traits) to spatial variation in environmental variables, protection, and anthropogenic pressures. We observed a positive association between forest cover and the occurrence of species with low tolerance of human disturbance. Protected areas were associated with higher occurrence for species across different functional groups compared with unprotected lands. We also observed the occurrence of species with low disturbance tolerance, herbivores, and large-bodied species was negatively associated with developmental pressures, such as human settlements, energy production and mining, and demographic pressures, such as biological resource extraction. For the conservation of threatened vertebrates, our work underscores the importance of maintaining forest cover and reducing deforestation within and outside protected areas, respectively. In addition, mitigating a suite of pervasive human pressures is also crucial for wildlife conservation in one of the world's most densely populated biodiversity hotspots.