Dry deposition and soil-air gas exchange of polychlorinated biphenyls (PCBs) in an industrial area

Ambient air and dry deposition, and soil samples were collected at the Aliaga industrial site in Izmir, Turkey. Atmospheric total (particle + gas) ∑₄₁-PCB concentrations were higher in summer (3370 ± 1617 pg m⁻³, average + SD) than in winter (1164 ± 618 pg m⁻³), probably due to increased volatilization with temperature. Average particulate ∑₄₁-PCBs dry deposition fluxes were 349 ± 183 and 469 ± 328 ng m⁻² day⁻¹ in summer and winter, respectively. Overall average particulate deposition velocity was 5.5 ± 3.5 cm s⁻¹. The spatial distribution of ∑₄₁-PCB soil concentrations (n = 48) showed that the iron-steel plants, ship dismantling facilities, refinery and petrochemicals complex are the major sources in the area. Calculated air-soil exchange fluxes indicated that the contaminated soil is a secondary source to the atmosphere for lighter PCBs and as a sink for heavier ones. Comparable magnitude of gas exchange and dry particle deposition fluxes indicated that both mechanisms are equally important for PCB movement between air and soil in Aliaga.     

The Evaluation of Mesoporous Materials as Catalyst in Fast Pyrolysis of Wheat Straw

In this study, wheat straw was chosen as a biomass sample and the fast pyrolysis of this sample was carried out with or without catalyst at different conditions in a well-swept fixed-bed reactor. Experiments were carried out in a well-swept tubular fixed-bed reactor with a heating rate of 300°C/min, between pyrolysis temperature ranges 300–800°C in the nitrogen atmosphere. The results indicated that a maximum oil yield of 31.9% was obtained at a pyrolysis temperature of 500°C in non-catalytic procedure. Siliceous and Al-MCM-41 materials were evaluated as potential catalysts in the pyrolysis experiments. Mesoporous materials have large pore dimensions with strong acid sites. These acidic sites catalyze some reactions in pyrolysis. The product yields and the quality of bio-oil were influenced with using MCM-41 materials. The bio-oil yield was reduced, whereas the gas yield increased with using a catalyst in the experiments. An increase in the fractions of pure phenol, alkyl phenols, alkenes+alkanes, carbonyls, aromatic, and cyclic compounds and a decrease in the fractions of methoxy phenols, acids+esters, furans, and alcohols were observed in the presence of Al-MCM-41 material. According to all results, the use of Al-MCM-41 materials as catalyst in the pyrolysis can be suggested to obtain both quality fuels and valuable chemicals.     

Biochemical response to exposure to six textile dyes in early developmental stages of Xenopus laevis

The present study was undertaken to determine the toxic effect of a lethal concentration of six different commercially used textile dyes on the 46th stage of Xenopus laevis tadpoles. The tadpoles were exposed to Astrazon Red FBL, Astrazon Blue FGRL, Remazol Red RR, Remazol Turquoise Blue G-A, Cibacron Red FN-3G, and Cibacron Blue FN-R for 168 h in static test conditions, and thus, 168-h median lethal concentrations (LC₅₀s) of each dye were determined to be 0.35, 0.13, 112, 7, 359, and 15.8 mg/L, respectively. Also, to evaluate the sublethal effects of each dye, tadpoles were exposed to different concentrations of dyes (with respect to 168-h LC₅₀s) for 24 h. The alteration of selected enzyme activities was tested. For this aim, glutathione S-transferase (GST), carboxylesterase, and lactate dehydrogenase (LDH) were assayed. After dye exposure, the GST induction or inhibition and LDH induction indicated some possible mechanisms of oxidative stress and deterioration in aerobic respiration processes induced by the tested dyes. Findings of the study suggest that selected biomarker enzymes are useful in understanding the toxic mechanisms of these dyes in X. laevis tadpoles as early warning indicators. Therefore, these selected biomarkers may evaluate the effect of environmental factors, such as textile dye effluents and other industrial pollutants, on amphibians in biomonitoring studies.     

Solidification of tannery wastes

The high chromium concentrations in tannery-wastewater treatment-plant sludges, render them unsuitable for direct disposal. Therefore, one aims to fix the chromium of the tannery waste by adding different additive materials to cause solidification. The properties of the raw sludge were determined and subsequently, the sludge was mixed with cement and additives and left to solidify for 28 days. During the study, 28 different mixtures were prepared and their compressive strengths were determined. Standard elutriation tests were carried out with each solidified sample. Compressive strengths were obtained below the desired concrete strengths. Most of the pollutant parameters in eluate were under the required values.     

Soil pollution by trace metals derived from animal feed and manure in the Bursa region of Turkey

The Bursa region of Turkey has important agricultural production areas. Animal producers use agricultural fields in this region for disposal of manure. Therefore, in this study the concentrations of the seven trace metals Zn, Mn, Cu, Ni, Cr, Pb, and Cd in 324 animal feed and manure samples from three dairy cattle, three laying hens farms, and three broiler farms have been determined. The average concentrations in dairy cattle manure were 130 (Zn), 150 (Mn), 4.2 (Cu), 6.8 (Ni), 44 (Cr), 0.8 (Pb), and 0.09 (Cd) mg kg^?1 dry weight; for laying hens manure 240 (Zn), 190 (Mn), 0.63 (Cu), 3.8 (Ni), 30 (Cr), 0.55 (Pb), and 0.12 (Cd) mg kg^?1 dry weight; and for broiler manure 240 (Zn), 280 (Mn), 1.4 (Cu), 3.8 (Ni), 35 (Cr), 3.4 (Pb), and 0.16 (Cd) mg kg^?1 dry weight. The calculated trace metal loading rate indicated that manure application might pose a potential risk to agricultural fields according to the current soil protection regulations of Turkey.     

Front velocity and structure of bottom gravity currents with a low volume of release propagating in a porous medium

The paper reports results of large eddy simulations of lock exchange compositional gravity currents with a low volume of release advancing in a horizontal, long channel. The channel contains an array of spanwise-oriented square cylinders. The cylinders are uniformly distributed within the whole channel. The flow past the individual cylinders is resolved by the numerical simulation. The paper discusses how the structure and evolution of the current change with the main geometrical parameters of the flow (e.g., solid volume fraction, ratio between the initial height of the region containing lock fluid and the channel depth, ratio between the initial length and height of the region containing lock fluid) and the Reynolds number. Though in all cases with a sufficiently large solid volume fraction the current transitions to a drag-dominated regime, the value of the power law coefficient, α, describing the front position’s variation with time (x _f  ~ t ^α , where t is the time measured from the removal of the lock gate) is different between full depth cases and partial depth cases. The paper also discusses how large eddy simulation (LES) results compare with findings based on shallow-water equations. In particular, LES results show that the values of α are not always equal to values predicted by shallow water theory for the limiting cases where the current height is comparable, or much smaller, than the channel depth.     

Evaluation of physical, chemical and microbiological properties of lake Uluabat, Turkey

Lake Uluabat, known for its scenic beauty and richness of aquatic life, is situated in Marmara Region, Bursa (Turkey). On account of its importance, lake Uluabat was designated by the Ministry of Environment as a Ramsar site in 1998. Physical, chemical and microbiological parameters of the aquatic ecosystem in lake Uluabat were measured monthly at five stations from February 2003 to January 2004. The results showed that lake Uluabat can be classified as Class I with respect to temperature (16.36 +/- 7.47 degrees C), nitrate nitrogen (0.63 +/- 0.50 mgl(-1)), sodium (9.64 +/- 2.78 mgl(-1)), chloride (20.45 +/- 4.59 mgl(-1)), sulphate (54.80 +/- 29.97 mgl(-1)); as Class II with respect to dissolved oxygen (7.62 +/- 1.99 mgl(-1)), ammonium nitrogen (0.52 +/- 0.49 mgl(-1)), chemical oxygen demand (35.74 +/- 10.66 mgl(-1)), total coliform (2027 MPN100 ml(-1) (average value)); as Class III with respect to pH (8.69 +/- 0.16) and as Class IV with respect to total nitrogen (84.94 +/- 66.13 mgl(-1)), total phosphorus (1.11 +/- 3.01 mgl(-1)), biochemical oxygen demand (21.21 +/- 6.60 mgl(-1)) according to TWPCR (Turkey Water Pollution Control Regulation). The nutrient content of lake waterapparently indicated that lake had an eutrophic characteristic. Phosphorus was determined as a limiting factor in lake. The measured hardness values (140.94 +/- 14.61 CaCO3 mgl(-1)) indicated that lake water was classified as soft/hard during the study period. Eutrophic characteristic of the lake and contaminant accumulation in water will probably affect the future use of the lake. Therefore, pollution parameters must be regularly monitored and evaluated according to aquatic living and local regulations.     

Heavy metal deposition in moss samples from East and South Marmara Region, Turkey

A survey of atmospheric heavy metal deposition in the east and south Marmara region, Turkey was carried out in September 2004. For this purpose, moss samples (Hypnum cupressiforme) were collected in a systematic network of 125 sites. Concentrations of the elements (Al, B, Ba, Ca, Cd, Fe, Co, Cr, Cu, K, Li, Mn, Na, Ni, Pb, Sr, Mg, Ti, and Zn) in the moss were used as an indication of the level of air pollution in the region. Significant differences in heavy metal concentrations, especially for Pb, Cd, Cu, and Zn, were recorded in the moss samples collected around industrialized and heavily populated cities (Istanbul, Bursa, Band?rma, Kocaeli, Biga-?an) and in an abandoned lead-mining area (Bal?kesir-Balya). A map of the spatial distribution of each element in the region was plotted, and enrichment factors were calculated. VARIMAX principal component analysis was applied to the data obtained, and five different components were obtained. The results showed that Pb, Cu, Cd, and Zn derived from anthropogenic and industrial sources while other elements came mostly from natural sources.     

Energy and emission benefits of chicken manure biogas production: a case study

Studies on the production of biogas of different organic materials in an anaerobic environment are being carried out all over the world. The most important parameters in these researches can be listed as raw material potential, production processes, economic analyses, and environmental effects. Chicken manure is one of the raw materials used in biogas production. In this study, in addition to the analysis of biogas and energy production potential from chicken manure, greenhouse gas emissions were analyzed to evaluate environmental effects. In Turkey, chicken manure is not adequately processed and causes environmental pollution. The model biogas plant and potential energy generation were researched in this field study. The pilot plant produces 8.58 million m³ of biogas per year by processing about 110 thousand tons of waste. It produces 17 GWh/year of electricity and 16 GWh/year of thermal energy, as well as reducing CO₂ greenhouse gas emissions by 13.86 thousand tons/year.