Assessing representativeness of places for conservation reservation and heritage listing

Problems arising from application of the representative criterion for conservation and natural heritage evaluation are discussed. An ecological basis to this criterion is suggested that focuses on those key environmental factors dominating biotic response. A methodology is proposed that utilizes computer-based methods of establishing and interrogating spatial data bases (geographic information systems), environmental modeling, and numeric analysis. An example is presented illustrating some of the advantages and limitations of classification and dimension reduction techniques in both defining bioenvironments and displaying their spatial distribution. The advantages of this method for representativeness evaluation are that it maximizes the utility of available data, is explicit and repeatable, and enables large areas to be analyzed at relatively fine scales.     

What’s the buzz? Ultrasonic and sonic warning signals in caterpillars of the great peacock moth (Saturnia pyri)

Caterpillars have many natural enemies and, therefore, have evolved a diversity of antipredator strategies. Most research focuses on those strategies (crypsis, countershading, and warning coloration) targeting visually guided predators. In contrast, defensive sounds, although documented for more than a century, have been poorly studied. We report on a novel form of sound production—chirping—in caterpillars of the common European Great Peacock moth (Saturnia pyri). Chirps are broadband, with dominant peaks ranging between the sonic (3.7 kHz) and ultrasonic (55.1 kHz) and are generated by a rapid succession of mandibular “tooth strikes.” Chirp trains are induced by simulated predator attacks and precede or accompany the secretion of a defensive chemical from integumental bristles, supporting our hypothesis that these sounds function in acoustic aposematism. We propose that these caterpillars generate multimodal warning signals (visual, chemical, and acoustic) to target the dominant sensory modalities of different predators, including birds, bats, and invertebrates. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Procedures in Sampling and Handling Auto Exhaust

Both the composition and discharge rate of auto exhausts vary widely and rapidly as speed and load demands upon the engine are changed. Moreover, among the combustion products are compounds that are highly reactive under proper conditions and others that are readily bound by receptive surfaces or absorbents. Under these conditions both the sampling procedure and subsequent sample handling must be such that (1) the sample that is recovered contains all or a fixed proportion of each incremental volume of the total to be represented and (2) the products so sampled are not allowed either to react with each other or to be lost or diminished in sample storage or transfer. Experimental research and development relevant to each requirement have been carried out, and results are reported and discussed. Two methods have been used for recovering sample-volume samples representative of the total volume produced during any combination of steady or transient engine modes. One employs a servo-followup system appropriately coupled to both the engine air-intake and to the sampling element; the sampling rate is continuously controlled to bear at all times a fixed ratio to the engine air-intake rate. The second method employs variable dilution, involving addition of diluent gas necessary to maintain a constant total of [exhaust + diluent]. If the mixture is sampled at a constant rate, the sample will contain exhaust appropriately proportioned. Experiments have shown differences in both hydrocarbon and NO_x values determined for comparable samples obtained by the two methods. The seriousness of this problem is discussed in relation to the sampling and sample handling procedures that are used.     

SNOTEL,the Soil Climate Analysis Network,and water supply forecasting at the Natural Resources Conservation Service: Past,present, and future

The Snow Survey and Water Supply Forecasting (SSWSF) Program and the Soil Climate Analysis Network (SCAN) of the United States Department of Agriculture's Natural Resources Conservation Service (NRCS) generate key observational and predictive information for water managers. Examples include mountain climate and snow monitoring through manual snow surveys and the SNOw TELemetry (SNOTEL) and SNOtel LITE networks, in situ soil moisture data acquisition through the SCAN and SNOTEL networks, and water supply forecasting using river runoff prediction models. The SSWSF Program has advanced continuously over the decades and is a major source of valuable water management information across the western United States, and the SCAN network supports agricultural and other water users nationwide. Product users and their management goals are diverse, and use-cases range from guiding crop selection to seasonal flood risk assessment, drought monitoring and prediction, avalanche and fire prediction, hydropower optimization, tracking climate variability and change, environmental management, satisfying international treaty and domestic legal requirements, and more. Priorities going forward are to continue innovating to enhance the accuracy and completeness of the observational and model-generated data products these programs deliver, including expanded synergies with the remote sensing community and uptake of artificial intelligence while maintaining long-term operational reliability and consistency at scale.     

Switching to Plan B: changes in the escape tactics of two grasshopper species (Acrididae: Orthoptera) in response to repeated predatory approaches

Most studies examining escape behaviour have considered single approaches and single fleeing responses; few have considered how organisms’ response is influenced by persistent pursuit. We explored fleeing behaviour of two grasshopper species to test whether they modified escape behaviour when approached repeatedly. Schistocerca alutacea did not increase flight initiation distance (FID) upon repeated approach but fled farther. Psinidia fenestralis increased its FID on the second approach but decreased its flight distance over successive escapes. Both species showed a bimodal pattern of flight direction, either flying directly away or flying perpendicular to the direction of the observer’s approach. Neither species showed a significant pattern of flight direction or change in flight direction with successive escapes. Most (88 %) P. fenestralis initially landed on sand, but after repeated approaches an increasing proportion landed in grass and hid. Both species therefore changed escape behaviour with persistent pursuit but used different tactics, suiting their flight ability or camouflage, and optimised habitat use. Three grasshopper species have now been examined for responses to repeated approach by predators and all show different tactics supporting escape decision theory. Our results emphasise the variety of escape responses across species and how the dynamic nature of escape responses vary according to an animal’s situation. Rather than single optimum escape options, each grasshopper species shows a range of responses, which vary with risk from persistent predators. Although grasshoppers provide an excellent model, it would be profitable to examine responses of a range of species according to levels of predation risk.     

Comparison of slope stability in two Brazilian municipal landfills

The implementation of landfill gas to energy (LFGTE) projects has greatly assisted in reducing the greenhouse gases and air pollutants, leading to an improved local air quality and reduced health risks. The majority of cities in developing countries still dispose of their municipal waste in uncontrolled 'open dumps.' Municipal solid waste landfill construction practices and operating procedures in these countries pose a challenge to implementation of LFGTE projects because of concern about damage to the gas collection infrastructure (horizontal headers and vertical wells) caused by minor, relatively shallow slumps and slides within the waste mass. While major slope failures can and have occurred, such failures in most cases have been shown to involve contributory factors or triggers such as high pore pressures, weak foundation soil or failure along weak geosynthetic interfaces. Many researchers who have studied waste mechanics propose that the shear strength of municipal waste is sufficient such that major deep-seated catastrophic failures under most circumstances require such contributory factors. Obviously, evaluation of such potential major failures requires expert analysis by geotechnical specialists with detailed site-specific information regarding foundation soils, interface shearing resistances and pore pressures both within the waste and in clayey barrier layers or foundation soils. The objective of this paper is to evaluate the potential use of very simple stability analyses which can be used to study the potential for slumps and slides within the waste mass and which may represent a significant constraint on construction and development of the landfill, on reclamation and closure and on the feasibility of a LFGTE project. The stability analyses rely on site-specific but simple estimates of the unit weight of waste and the pore pressure conditions and use "generic" published shear strength envelopes for municipal waste. Application of the slope stability analysis method is presented in a case study of two Brazilian landfill sites; the Cruz das Almas Landfill in Maceio and the Muribeca Landfill in Recife. The Muribeca site has never recorded a slope failure and is much larger and better-maintained when compared to the Maceio site at which numerous minor slumps and slides have been observed. Conventional limit-equilibrium analysis was used to calculate factors of safety for stability of the landfill side slopes. Results indicate that the Muribeca site is more stable with computed factors of safety values in the range 1.6-2.4 compared with computed values ranging from 0.9 to 1.4 for the Maceio site at which slope failures have been known to occur. The results suggest that this approach may be useful as a screening-level tool when considering the feasibility of implementing LFGTE projects.     

An evaluation of the applicability of microarrays for monitoring toxic algae in Irish coastal waters

The applicability of microarrays to monitor harmful algae across a broad range of ecological niches and toxic species responsible for harmful algal events has been one of the key tasks in the EU Seventh Framework Programme (FP7)-funded Microarrays for the Detection of Toxic Algae project. The technique has a strong potential for improving speed and accuracy of the identification of harmful algae and their toxins to assist monitoring programmes. Water samples were collected from a number of coastal sites around Ireland, including several that are used in the Irish National Phytoplankton and Biotoxin Monitoring Programme. Ribosomal RNA was extracted from filtered field samples, labelled with a fluorescent dye, and hybridised to probes spotted in a microarray format on a glass slide. The fluorescent signal intensity of the hybridisation to >120 probes on the chip was analysed and compared with actual field counts. There was a general agreement between cell counts and microarray signal. Results are presented for field samples taken from a range of stations along the Irish coastline known for harmful algal events during the first field trial (July 2009–April 2010).     

An improved dual channel PERCA instrument for atmospheric measurements of peroxy radicals

This paper describes a new dual-channel PEroxy RadiCal Amplification (PERCA) instrument, which has been designed to improve the time resolution and signal to noise and to reduce the interference caused by variations in ambient ozone concentrations. The instrument was run at the Weybourne Atmospheric Observatory (WAO), North Norfolk, during WAOWEX (Weybourne Atmospheric Observatory Winter Experiment) in January/February 2002 and INSPECTRO (Influence of clouds on the spectral actinic flux in the lower troposphere) in September 2002. The performance of the instrument is assessed and compared to that of a single channel instrument. In particular, it is shown how the precision is greatly improved in fluctuating background ozone conditions. In addition the improved time response of the instrument allows changes in peroxy radical concentrations to be related to rapid changes in nitric oxide concentrations and the ozone photolysis frequency, j(O(1)D).     

Web-based surveys as an alternative to traditional mail methods

Environmental economists have long used surveys to gather information about people's preferences. A recent innovation in survey methodology has been the advent of web-based surveys. While the Internet appears to offer a promising alternative to conventional survey administration modes, concerns exist over potential sampling biases associated with web-based surveys and the effect these may have on valuation estimates. This paper compares results obtained from a travel cost questionnaire of visitors to Fraser Island, Australia, that was conducted using two alternate survey administration modes; conventional mail and web-based. It is found that response rates and the socio-demographic make-up of respondents to the two survey modes are not statistically different. Moreover, both modes yield similar consumer surplus estimates.     

Toward a Practical Method for Setting Screening-Level, Ecological Risk-Based Water Temperature Criteria and Monitoring Compliance

We integrated basic concepts from fisheries science and toxicological risk assessment to form a potential method for setting screening-level, risk-based, site-specific water quality objectives for temperature. In summary, the proposed approach: (a) uses temperature impacts upon specific growth as a measure of chronic (cumulative) temperature effects; (b) explicitly incorporates the consequences of both magnitude and cumulative duration of exposures; (c) adjusts the result for local watershed conditions, reducing the likelihood that naturally warm systems are identified as thermally polluted while helping to ensure that naturally cool systems are closely monitored for ecologically harmful changes in thermal regime; and (d) expresses the net result both graphically and as a risk quotient, RQ, closely analogous to that used in toxicological risk assessments. The latter yields a site-specific, risk-based water quality objective and may serve as a straightforward decision rule for environmental managers. The method was applied to historical data from a small British Columbia stream subject to increasing urban development pressures. We also illustrate how the technique might be used to explore potential climatic change impacts, using coupled general circulation model predictions in conjunction with empirical downscaling. Overall, the method and results are presented as an introduction and illustration of concept, intended as a step toward the development of a logistically feasible risk-based approach to establishing screening-level, site-specific water temperature objectives, and monitoring compliance, in the context of large-scale, many-site, environmental monitoring networks. With further work, the technique offers potential to fill the gap between the temperature threshold-based targets typically specified in regulatory guidelines, which may be hydroecologically unrealistic, and detailed biophysical modelling, which typically is logistically infeasible in a day-to-day environmental monitoring and management context.