水质生物毒性在线监测技术研究进展

从生物分子、细胞、个体、种群和群落水平,系统介绍了国内外研发的水质毒性在线监测技术,归纳分析了各种技术的特点及应用,并提出了其发展前景与趋势。     

趋势分析法评价苯系物标准气体的时间稳定性

根据GB/T 15000.3—2008设计了苯系物标准气体的时间稳定性研究方案,制备了4瓶苯系物标准气体,随着时间的推移进行测定并将结果制图,结果显示量值随时间没有显著的变化趋势。以线性关系为模型,计算线性直线的斜率和斜率的标准偏差,用t检验判断斜率是否显著来评价标准气体的稳定性。计算结果显示,所有斜率均不显著,因此该研究制备的苯系物标准气体能够稳定保存22个月。根据时间稳定性数据计算由不稳定性引起的不确定度,并讨论了这种计算不稳定性引起不确定度的方法对结果有放大的可能性。     

区域环境风险评估研究进展

简述了区域环境风险及区域环境风险评估的内涵,以及国内外区域环境风险评估研究发展进程及现状,指出了现阶段区域环境风险评估存在的问题,提出应重点开展区域环境风险发生机理、定量表征区域环境风险方法等研究的展望。     

高效液相色谱法测定稻米和稻田水土中多菌灵残留

采用高效液相色谱法测定稻米和稻田水土中的多菌灵残留,用稀盐酸溶液提取,经液液分配净化,外标法定量。多菌灵的峰面积与进样质量在0．15ng-220ng范围内呈线性相关,在稻田水、土壤和稻米中的最低检出质量比分别为0．01mg／kg、0．01mg／kg和0．02mg／kg。3个质量水平的加标回收试验结果表明,多菌灵在稻田水样中的平均回收率为87．1％～93．0％,RSD为3．3％～3．8％;在土壤中的平均回收率为84．8％-91．9％,RSD为1．4％～4．1％;在稻米中的平均回收率为83．9％～89．6％,RSD为1．8％-5．5％。     

Risk assessment of heavy metals in road and soil dusts within PM2.5, PM10 and PM100 fractions in Dongying city, Shandong Province, China

15 road and 14 soil dust samples were collected from an oilfield city, Dongying, from 11/2009-4/2010 and analyzed by inductively coupled plasma-mass spectroscopy (ICP-MS) for V, Cr, Mn, Co, Ni, Cu, Zn, As, Cd and Pb within PM(2.5), PM(10) and PM(100) fractions synchronously. Metal concentrations, sources and human health risk were studied. Results showed that both soil and road dust exhibited higher values for Mn and Zn and lower values for Co and Cd for the three fractions. Mass concentration ratios of PM(2.5)/PM(10) and PM(10)/PM(100) for metals in road and soil dust indicate that most of the heavy metals tend to concentrate in fine particles. Geoaccumulation index and enrichment factors analysis showed that Cu, Zn and Cd exhibited moderate or heavy contamination and significant enrichment, indicating the influence of anthropogenic sources. Vanadium, Cr, Mn and Co were mostly not enriched and were mainly influenced by crustal sources. For Ni, As and Pb, they ranged from not enriched to moderately enriched and were influenced by both crustal materials and anthropogenic sources. The conclusions were confirmed by multivariate analysis methods. Principle component analysis revealed that the major sources were vehicle emission, industrial activities, coal combustion, agricultural activities and crustal materials. The risk assessment results indicated that metal ingestion appeared to be the main exposure route followed by dermal contact. The most likely cause for cancer and other health risks are both the fine particles of soil and road dusts.     

Chemical compositions and sources of atmospheric PM10 in heating, non-heating and sand periods at a coal-based city in northeastern China

Mass concentrations and chemical components (18 elements, 9 ions, organic carbon [OC] and elemental carbon [EC]) in atmospheric PM(10) were measured at five sites in Fushun during heating, non-heating and sand periods in 2006-2007. PM(10) mass concentrations varied from 62.0 to 226.3 μg m(-3), with 21% of the total samples' mass concentrations exceeding the Chinese national secondary standard value of 150 μg m(-3), mainly concentrated in heating and sand periods. Crustal elements, trace elements, water-soluble ions, OC and EC represented 20-47%, 2-9%, 13-34%, 15-34% and 13-25% of the particulate matter mass concentrations, respectively. OC and crustal elements exhibited the highest mass percentages, at 27-34% and 30-47% during heating and sand period. Local agricultural residuals burning may contribute to EC and ion concentrations, as shown by ion temporal variation and OC and EC correlation analysis. Heavy metals (Cr, Ni, Zn, Cu and Mn) from coal combustion and industrial processes should be paid attention to in heating and sand periods. The anion/cation ratios exhibited their highest values for the background site with the influence of stationary sources on its upper wind direction during the sand period. Secondary organic carbon were 1.6-21.7, 1.5-23.0, 0.4-17.0, 0.2-33.0 and 0.2-21.1 μg m(-3), accounting for 20-77%, 44-88%, 4-77%, 8-69% and 4-73% of OC for the five sampling sites ZQ, DZ, XH, WH and SK, respectively. From the temporal and spatial variation analysis of major species, coal combustion, agricultural residual burning and industrial emission including dust re-suspended from raw material storage piles were important sources for atmospheric PM(10) in Fushun at heating, non-heating and sand periods, respectively. It was confirmed by principal component analysis that coal combustion, vehicle emission, industrial activities, soil dust, cement and construction dust and biomass burning were the main sources for PM(10) in this coal-based city.     

Evaluation of rural wastewater treatment processes in a county of eastern China

With the rapid urbanization and industrialization in China, wastewater treatment in rural areas has become an increasing national concern. The selection of appropriate treatment processes closely based on the actual local status is crucial for the prevention of water quality deterioration in rural areas of China. This study presents a full year survey on the performances of various rural wastewater treatment processes at a county level in eastern China including seven three-chamber septic tanks (ST), five micro-power biological facilities (MP), seven constructed wetlands (CW), three stabilization ponds (SP) and five centralized activated sludge treatment plants (AS). It was found that although ST could remove a notable portion of total suspended solids (TSS) and chemical oxygen demand (COD(Cr)), it was ineffective in reducing nutrients and pathogens. Reliability and stability analyses showed that the centralized AS and decentralized CW processes outperformed the SP and MP processes. There were obvious discrepancies between the mean design concentrations, which ensure that 95% of the effluents meet the discharge standards, and the actual effluent concentrations determined for each process. The expected compliance with the tentatively adopted second-grade discharge standards (GB 18918-2002) was unsatisfactory for most of the water quality parameters examined, indicating an urgent need to design more practical discharge standards for decentralized treatment processes. Based on an overall assessment of reliability, stability and cost-effectiveness, the centralized AS was suitable for densely populated towns while the decentralized CW was suitable for sparsely populated villages.     

环境监测用5种氯代烯烃混合气体标准样品研制

介绍了1μmol/mol氮气中5种氯代烯气体标准样品的研制方法。这5种氯代烯包括氯乙烯、1,1-二氯乙烯、顺1,2-二氯乙烯、三氯乙烯、四氯乙烯,其中氯乙烯常温下为气态,其他4种为液态,并且沸点低,将这几种氯代烯制备成气体标准样品存在制备精度低、气液转换不完全等困难。经研究,采用2步称量法制备5种氯代烯气体标准样品,重复制备的相对标准偏差小于1.6%。建立了5种氯代烯标准气体瓶内均匀性的实验方法,并通过考察样品量值伴随样品压力的变化来评价样品的均匀性。结果显示,5种氯代烯标准气体是均匀的,最低使用压力为1 MPa。依照ISO 15000.3来考察样品的时间稳定性,样品有效期为12个月。相对扩展不确定度为3%(置信度为95%)。     

Persistence and effect of processing on reduction of chlorantraniliprole residues on brinjal and okra fruits

Dissipation and decontamination of chlorantraniliprole (Coragen 18.5 SC) in brinjal and okra fruits were studied following field application at single and double doses of 30 and 60 g ai ha^?1, and the residues of the insecticide was estimated using LC-MS/MS. Initial residues of chlorantraniliprole at single and double doses on the fruits of brinjal were 0.72 and 1.48 mg kg^?1, while on okra fruits, the residues were 0.48 and 0.91 mg kg^?1, respectively. The residues reached below detectable level of 0.01 mg kg^?1 on the 10th day. Half-life of chlorantraniliprole at 30 and 60 g ai ha^?1 on brinjal was 1.58 and 1.80 days with the calculated waiting period of 0.69 and 2.38 days, whereas on okra, the values were 1.60 and 1.70 and 0 and 1.20 days, respectively. The extent of removal of chlorantraniliprole using simple decontaminating techniques at 2 h and 3 days after spraying was 40.99–91.37 % and 29.85–89.12 %, respectively, from brinjal fruits and 47.78–86.10 % and 41.77–86.48 %, respectively, from okra fruits.