Chemical and biological characteristics of streams in the Owabi watershed

In this investigation, concentrations of physico-chemical and bacteriological qualities of water samples from the major streams within the Owabi watershed in Kumasi, Ghana, were measured at five different locations. The streams were moderately soft and neutral, having a mean pH range of 7.08 ± 0.2 to 7.88 ± 0.6. Total dissolved solids, total suspended solids, grease and oil, alkalinity, and the major ion levels varied significantly at each sampling site. Nutrient levels were however low and did not show any clear variation at sample locations. The bacteriological quality of the water was poor, rendering it unsafe for domestic purposes without treatment. The poor bacteriological quality was due to direct contamination by animal and human wastes. The streams have an appreciable self-purification capacity which is stressed by persistent pollution overloads caused by expanding human activities within the catchment. Cluster analysis performed on the data to determine pollution patterns between the streams depicts that River Owabi was less polluted, Rivers Akyeampomene and Sukobri were moderately polluted, while River Pumpunase was highly polluted.     

Non-native vascular flora of the Arctic: Taxonomic richness,distribution and pathways

We present a comprehensive list of non-native vascular plants known from the Arctic, explore their geographic distribution, analyze the extent of naturalization and invasion among 23 subregions of the Arctic, and examine pathways of introductions. The presence of 341 non-native taxa in the Arctic was confirmed, of which 188 are naturalized in at least one of the 23 regions. A small number of taxa (11) are considered invasive; these plants are known from just three regions. In several Arctic regions there are no naturalized non-native taxa recorded and the majority of Arctic regions have a low number of naturalized taxa. Analyses of the non-native vascular plant flora identified two main biogeographic clusters within the Arctic: American and Asiatic. Among all pathways, seed contamination and transport by vehicles have contributed the most to non-native plant introduction in the Arctic.     

Bringing it all together: researcher dialogue to improve synthesis in regional climate adaptation in South-East Queensland,Australia

The effectiveness of climate adaptation policies in one sector can be compromised or aided by policies developed in another sector. When the focus of adaptation is a single geographical region, this potential for interaction between sectoral policies is heightened due to spatial, political and functional proximities. This paper analyses interactions within three suites of climate adaptation options developed for Australia’s ‘South-East Queensland’ region relating to: (1) wetland migration, coastal infrastructure and planned retreat; (2) urban water security and energy demand; and (3) terrestrial biodiversity and agricultural viability. Using the concept of ‘institutional interplay’ to structure a process of dialogue amongst researchers, we identify a number of critical implementation requirements for successful regional-scale adaptation. There is a need for greater focus on neighbourhood or sub-regional scales of policy design and intervention, particularly for the coordination of adapted infrastructure and services to households. Policy-makers must also be more explicit in considering broader drivers of land-use change and economic adjustment likely to impact on proposed adaptations. In considering these issues, our paper also demonstrates a process for conducting cross-sectoral syntheses that can be employed in other regional-scale adaptation studies.     

A Study of Field Burning Under Varying Environmental Conditions

A field study on grass field burning was conducted in the Willamette Valley of Oregon during the summer of 1965. Approximately 230,000 acres of grass fields are burned in the valley during August and September. Serious air pollution problems result from this burning. The purposes of the study were to determine the effect of environmental variables on grass field burning and to determine if conditions exist when significant air pollution reduction can be achieved. The environmental variables investigated were time from harvest to burning, time of day, air temperature, relative humidity, soil and straw moisture, wind speed and direction, and fuel density. The dependent variables measured were particulate emission and size distribution, combustion temperature, burn rate, amount of ash, percent of organics in the particulate, and smoke appearance. The results were analyzed statistically to determine the significant variables and their relationship.     

A Measurement Program to Determine Plume Configurations at the Beaver Gas Turbine Facility,Port Westward,Oregon

An experimental program was undertaken in December 1974, for the Portland General Electric Company (PGE) to ascertain the plume configurations resulting from the operations of the Beaver Gas Turbine Facility at Port Westward, OR. The experimental program consisted of: airborne measurements of NO_X to determine the plume (s) configuration and a meteorological field program to determine atmospheric stabilities and wind profiles during the field program. This note reports on the plume measurement portion of the program only.     

Tomato Root: Site of Initial Alteration in Minor Elements in Cadmium Treated Plants

Abstract

Societal and governmental pressures to reduce diesel exhaust emissions are reflected in the existing and projected future heavy-duty certification standards of these emissions. Various factors affect the amount of emissions produced by a heterogeneous charge diesel engine in any given situation, but these are poorly quantified in the existing literature. The parameters that most heavily affect the emissions from compression ignition engine-powered vehicles include vehicle class and weight, driving cycle, vehicle vocation, fuel type, engine exhaust aftertreatment, vehicle age, and the terrain traveled. In addition, engine control effects (such as injection timing strategies) on measured emissions can be significant. Knowing the effect of each aspect of engine and vehicle operation on the emissions from diesel engines is useful in determining methods for reducing these emissions and in assessing the need for improvement in inventory models. The effects of each of these aspects have been quantified in this paper to provide an estimate of the impact each one has on the emissions of diesel engines.     

Photochemical Reactivity of Perchloroethylene: A New Appraisal

Perchloroethylene (PCE), a solvent used in dry cleaning, has been suspected of contributing significantly to photochemical ozone/oxidant (O₃/O_x) problems in urban atmospheres. Past evidence, however, was neither complete nor consistent. To interpret more conclusively the past evidence, and further understand PCE's role in the O₃O_x problem, a smog chamber testing program was conducted. The program's objectives were: (a) to explain the mechanism of the PCE reaction in smog chamber atmospheres, and (b) to extrapolate the smog chamber findings regarding PCE reactivity to the real atmosphere. Results showed that in smog chambers, PCE reacts and forms O₃/O_x following what appears to be a Cl instigated photooxidation mechanism rather than the OH initiated mechanism accepted in current smog chemistry. The evidence, collectively, strongly supported this conclusion even though the source of Cl atoms could not be identified with confidence. It was further concluded that in the real atmosphere neither the Cl instigated nor the OH instigated photooxidations of PCE can generate substantial concentrations of O₃/O_x. In fact, PCE contributes less to the ambient O₃/O_x problem than equal concentrations of ethane.     

Development and Application of Protocols for the Determination of Response of Real-Time Particle Monitors to Common Indoor Aerosols

Abstract

Protocols have been developed and applied for the generation of aerosols that are likely to be comparable to those encountered in field settings for the calibration of easily transportable/portable real-time particle monitors. Aerosols generated were simulated environmental tobacco smoke, cedar wood smoke, cooking oil fumes, and propane stove particles. The time-integrated responses of three nephelometers and a monitor for particle-bound polynuclear aromatic hydrocarbons (PAH) were compared with gravimetric respirable suspended particulate matter (RSP) in a controlled-atmosphere chamber. In general, the monitor responses increased linearly with increasing mass concentration. However, the two monitors that reported mass per volume concentrations tended to overreport the actual RSP concentrations by factors up to 4.4. The real-time PAH monitor did not respond to cooking oil fumes, indicative of little PAH being present in the aerosol. One of the monitors that has been used in a variety of studies reported in the literature (DustTrak) was collocated with gravimetric RSP samplers in several hospitality venues in the Louisville, KY, area. Field studies indicated that the units overreported actual RSP concentrations by factors of 2.6–3.1, depending on whether the sampling was conducted in the nonsmoking or smoking sections of the facilities.     

Managing the negative impacts of groundwater flow on electrothermal remediation

Rapid groundwater fluxes often influence subsurface temperature distributions during in situ thermal remediation using electrothermal or conduction heating technologies. This study used a numerical approach to evaluate the impact of groundwater flow on electrothermal heating, as well as the effectiveness of several upgradient heat loss management strategies, in a hypothetical treatment volume. Design alternatives using upgradient (i) hydraulic barriers, (ii) physical barriers, and (iii) increased energy input are evaluated. Results indicate that target temperatures can be achieved, despite the presence of local groundwater flow velocities greater than 0.3 m/day, through the careful design and implementation of the alternatives evaluated. However, physical barriers need to be designed to prevent groundwater flow through the heated volume to be effective. Field data from an electrothermal application are also presented, where boiling temperatures were achieved after steam injection and upgradient pumping wells were implemented.