Environmental and biological monitoring of benzene in traffic policemen, police drivers and rural outdoor male workers

To evaluate exposure to benzene in urban and rural areas, an investigation into personal exposure to benzene in traffic policemen, police drivers and rural (roadmen) male outdoor workers was carried out. Personal samples and data acquired using fixed monitoring stations located in different areas of the city were used to measure personal exposure to benzene in 62 non-smoker traffic policemen, 22 police drivers and 57 roadmen. Blood benzene, urinary trans-trans muconic acid (t,t-MA) and S-phenyl-mercapturic acid (S-PMA) were measured at the end of work shift in 62 non-smoker traffic policemen, 22 police drivers and 57 roadmen and 34 smoker traffic policemen, 21 police drivers and 53 roadmen. Exposure to benzene was similar among non-smoker traffic policemen and police drivers and higher among non-smoker urban workers compared to rural workers. Blood benzene, t,t-MA and S-PMA were similar among non-smoker traffic policemen and police drivers; blood benzene and t,t-MA were significantly higher in non-smoker urban workers compared to rural workers. Significant increases in t,t-MA were found in smokers vs. non-smokers. In non-smoker urban workers airborne benzene and blood benzene, and t,t-MA and S-PMA were significantly correlated. This study gives an evaluation of the exposure to benzene in an urban area, comparing people working in the street or in cars, to people working in a rural area. Benzene is a certain carcinogen for humans. The results we showed should lead to more in-depth studies about the effects on health of these categories of workers.     

Remobilization of polychlorinated biphenyls from sediment and its consequences for their transport in river waters

A laboratory experiment was performed to examine the remobilization of indicator polychlorinated biphenyls (iPCBs) from sediments and its results were applied to the real-world data for explaining the transport of PCBs in river. Seven PCB concentrations were determined in three series of model water–sediment systems (3 g of river sediment, three different volumes of distilled water (0.5, 0.25, and 0.15 ml), and 5 mg of biocide) after 11 days of incubation. Solid-phase extraction was used for separation of analytes from the aqueous phase and solvent extraction for isolation of analytes from the sediments, respectively. The extracts were analyzed for individual iPCB congeners using gas chromatography–mass spectrometry method. For each series of the experiment, the concentrations of PCBs in aqueous phase were similar. The average sediment/water partition coefficient value was 10⁴?l/kg. The solubility of individual PCB congeners in water did not influence the desorption of PCBs from the sediment. Although the dominant form of PCBs in a water–sediment system occurs as suspended and colloidal fractions, these compounds are transported mostly in a dissolved form. Suspended and colloidal matter is a major sink for PCBs in low-energy aquatic environments. In contrast, the dissolved PCBs are readily transported in running waters. The mobilization of PCBs from sediments to aqueous phase, with respect to their solubility in water, seems to be limited, thus reducing the risk of secondary pollution.     

The levels and composition of persistent organic pollutants in alluvial agriculture soils affected by flooding

The concentrations and composition of persistent organic pollutants (POPs) were determined in alluvial soils subjected to heavy flooding in a rural region of Poland. Soil samples (n?=?30) were collected from the upper soil layer from a 70-km² area. Chemical determinations included basic physicochemical properties and the contents of polychlorinated biphenyls (PCBs), hexachlorocyclohexanes (HCHs), dichlorodiphenyltrichloroethanes (DDTs) and polycyclic aromatic hydrocarbons (PAHs, 16 compounds). The median concentrations of Σ7PCB (PCB28?+?PCB52?+?PCB101?+?PCB118?+?PCB138?+?PCB153?+?PCB180), Σ3HCH (α-HCH?+?β-HCH?+?γ-HCH) and Σ3pp′(DDT?+?DDE?+?DDD) were 1.60?±?1.03, 0.22?±?0.13 and 25.18?±?82.70 μg kg^?1, respectively. The median concentrations of the most abundant PAHs, phenanthrene, fluoranthene, pyrene, benzo[b]fluoranthene and benzo[a]pyrene were 50?±?37, 38?±?27, 29?±?30, 45?±?36 and 24?±?22 μg kg^?1, respectively. Compared with elsewhere in the world, the overall level of contamination with POPs was low and similar to the levels in agricultural soils from neighbouring countries, except for benzo[a]pyrene and DDT. There was no evidence that flooding affected the levels of POPs in the studied soils. The patterns observed for PAHs and PCBs indicate that atmospheric deposition is the most important long-term source of these contaminants. DDTs were the dominant organochlorine pesticides (up to 99 %), and the contribution of the parent pp′ isomer was up to 50 % of the ΣDDT, which indicates the advantage of aged contamination. A high pp′DDE/pp′DDD ratio suggests the prevalence of aerobic transformations of parent DDT. Dominance of the γ isomer in the HCHs implies historical use of lindane in the area. The effect of soil properties on the POP concentrations was rather weak, although statistically significant links with the content of the <0.02-mm fraction, C_total or N_total were observed for some individual compounds in the PCB group.     

Validation of the Polish version of the World Health Organization Disability Assessment Schedule (WHODAS 2.0) in an elderly population (60–70 years old)

Purpose. To assess the reliability and validity of the Polish version of the 36-point World Health Organization Disability Assessment Schedule (WHODAS 2.0) in an elderly population. Method. One thousand randomly selected individuals, aged 60–70 years, living in south-eastern Poland were assessed using the Polish version of the WHODAS 2.0. Results. The analysis confirmed the high reliability and validity of the tool. Cronbach’s α index was 0.89. The tool had high stability, and the correlation between test and retest results was high. The relevance of the domain selection was high or very high. A factor analysis confirmed the relevance of assigning questions to domains. High theoretical relevance was also demonstrated. Statistically significant differences between those who were and were not suffering from health problems were observed. An analysis of the internal structure of the WHODAS 2.0 revealed strong correlations between the components of each domain and the final result. Conclusion. The Polish version of the WHODAS 2.0 showed high reliability and validity; thus, it can be used to assess health, functioning and disability in the elderly population of Poland.     

Effects of falling weight impact on industrial safety helmets used in conjunction with eye and face protection devices

Industrial workplaces pose concurrent hazards to the upper part of the head and the eyes. Under the circumstances, workers may use protective helmets in conjunction with protective goggles or spectacles. In order to assess the compatibility of this equipment, a method and a test stand for evaluating the behavior of safety helmets and protective goggles/spectacles upon the impact of a falling weight were designed. The results of tests concerning the displacement and deformation of helmets and spectacles/goggles, the forces acting on the helmets, as well as the forces exerted by the spectacles/goggles on the headform upon falling weight impact are presented. The results revealed the ways in which the tested equipment interacted with each other. The influence of equipment construction on the test results was analyzed and inferences concerning the safety of the studied protective devices were made. Some general construction guidelines were formulated for the compatibility of the equipment.     

Double Green Process: a low environmental impact method for recycling of CdTe,a-Si and CIS/CIGS thin-film photovoltaic modules

On the basis of the method for managing the end of life of CdTe photovoltaic panels previously proposed by the authors, a new method for the recycling of all types of thin-film panels (CdTe, a-Si and CIS/CIGS) has been developed and optimised under a research project founded by Enel Foundation and CRUI Foundation. The DGP process has been developed through a feasibility study carried out from three points of view: technical, environmental and economic. The process is composed by two sub-processes matched to each other, one suitable for CdTe panels (named DGPa) and the other one for a-Si and CIS/CIGS panels (DGPb). The Double Green Panel process is based mainly on mechanical treatments with a minimum use of chemicals and it is characterised by a greater level of automation and a high flexibility in production capacity. The potential environmental impacts of various configurations of the DGP process have been extensively analysed with LCA tool in order to develop an environmentally friendly process. The economic feasibility has been assessed through the Discounted Cash Flow Analysis (DCFA) method. The revenues associated to the recovery of valuable and common materials and the recycling costs have been taken into account.     

The impact of pesticides on oxidative stress level in human organism and their activity as an endocrine disruptor

Pesticides cause serious environmental and health problems both to humans and animals. The aim of this review is to discuss selected herbicides and fungicides regarding their mode of action and their influence on basic oxidative stress parameters and endocrine disruption properties tested in selected cell cultures in vitro. Because of numerous difficulties which animal studies are subject to, cell cultures are an excellent experimental model reflecting human exposure to different pesticides through all relevant routes. This experimental model can be used to monitor aggregate and cumulative pesticide exposures.     

Examination of the Enzyme Resistance of Polyurethane Powder Coatings

Polyurethanes powder lacquers were obtained in a reaction hydroxy terminated polyester resin RUCOTE 102 and blocked polyisocyanate crosslinkers. The polyisocyanates were synthesized using alicyclic diisocyanates (IPDI and H₁₂MDI) and monohydric aliphatic alcohols as well as dibutyltin dilaurate and triethylamine as a catalysts. The biodegradation experiments were realized in solution consisted of lipase (Novozym 735, Novozym 51,032, Lipolase 100L or Palatase 20,000) and phosphate buffer during 42 days at 37 °C. The biodegradation progress was controlled by using optical microscopy method, thermal analysis TG/DTA, DSC method, surface free energy parameters, total organic carbon measurements and sample weight loss. The three-dimensional surface topography of the powder lacquers by means of confocal microscope was investigated. The values of surface roughness parameters were calculated.     

Possibilities for the efficient utilisation of spent geothermal waters

Waters located at greater depths usually exhibit high mineral content, which necessitates the use of closed systems, i.e. re-injecting them into the formation after recovering the heat. This significantly reduces investment efficiency owing to the need to drill absorption wells and to perform anti-corrosion and anti-clogging procedures. In this paper, possibilities for the efficient utilisation of cooled geothermal waters are considered, particularly with respect to open or mixed geothermal water installations. Where cooled water desalination technologies are used, this allows the water to be demineralised and used to meet local needs (as drinking water and for leisure purposes). The retentate left as a by-product of the process contains valuable ingredients that can be used for balneological and/or leisure purposes. Thus, the technology for desalinating spent geothermal waters with high mineral content allows improved water management on a local scale and makes it possible to minimise the environmental threat resulting from the need to dump these waters into waterways or surface water bodies and/or inject them into the formation. The paper is concerned with Polish geothermal system and provides information about the parameters of Polish geothermal waters.     

The New Zealand experience of varroa invasion highlights research opportunities for Australia

The Varroa mite (Varroa destructor) is implicated as a major disease factor in honey bee (Apis mellifera) populations worldwide. Honey bees are extensively relied upon for pollination services, and in countries such as New Zealand and Australia where honey bees have been introduced specifically for commercial pollinator services, the economic effects of any decline in honey bee numbers are predicted to be profound. V. destructor established in New Zealand in 2000 but as yet, Australia remains Varroa-free. Here we analyze the history of V. destructor invasion and spread in New Zealand and discuss the likely long-term impacts. When the mite was discovered in New Zealand, it was considered too well established for eradication to be feasible. Despite control efforts, V. destructor has since spread throughout the country. Today, assessing the impacts of the arrival of V. destructor in this country is compromised by a paucity of data on pollinator communities as they existed prior to invasion. Australia’s Varroa-free status provides a rare and likely brief window of opportunity for the global bee research community to gain understanding of honey bee-native pollinator community dynamics prior to Varroa invasion.