Monitoring of Benzene in Ambient Air with Organic Vapor Badges

The original Texas Intersection Model (TEXIN) for air quality near street intersections has been widely adopted across the nation. At the request of transportation agencies from several states, the TEXIN model was revised to improve its performance and flexibility. The new capabilities include T-intersections, one-way streets, four-way stops, inspection/maintenance capabilities, anti-tampering programs and a short-cut emissions algorithm. TEXIN2 uses the CMA procedures for estimating traffic flow parameters, MOBILE3 to determine free flowing traffic cruise emissions, and CALINE3 to model the pollutant distribution downwind of an intersection. The new model, TEXIN2, offers the user more accurate simulations with enhanced versatility while still requiring a minimal amount of input data.     

Public Reaction to SIP Revisions for Ozone Reduction

ABSTRACT

This study utilized a biotrickling filter with blast-furnace slag packings (sizes = 20-40 mm; specific surface area = 120 m²/m³) to treat toluene in an air stream. Also studied were the effects of volumetric loading (L), nutrient addition, and superficial gas velocity (U_g) or gas retention time on toluene elimination capacity. Experimental results indicate that, for a test period of 121 days, with no excess biomass removal, toluene removal efficiencies of over 90% were obtained with U_g < 80 m/hr and L < 30 g/m³.hr. For a test period of 49 days, with U_g < 80 m/hr and L increased from 1.2 to 81 g/m³.hr, the absence of nutrient supplementation did not limit the toluene elimination capacity. Nutrients stored in the biofilm could adequately support the microbial activity for the toluene elimination. According to data regression, a simplified mass-transfer model is proposed, which correlates the contaminant concentration with the packing height or gas empty bed retention time. As verified, the model proposed herein can be applied to cases involving low influent contaminant concentrations or loadings to the extent that none or only a trace amount of the contaminant can be found in the recirculation liquid. Although small media with larger specific surface areas can achieve a better mass transfer, the problems of frequent backwashing and relatively greater gas resistance in using this type of media probably outweigh the advantages, particularly for full-scale systems that would not be watched as closely as laboratory test systems.     

Source Fingerprints for Receptor Modeling of Volatile Organics

The development of receptor models for the determination of the sources of an ambient air pollutant requires that the composition of the pollutant at the point of emission be known. For this study, composition information for 10 sources of volatile organic compounds (VOC) were evaluated and source fingerprints developed. The source categories include motor vehicles, gasoline vapor, petroleum refineries, architectural coatings, graphic arts, waste-water treatment, vapor degreasing, drycleaning, automobile assembly (including body painting), and polyethylene production. The fingerprints are presented for a group of 23 compounds. These compounds were selected for a variety of reasons including ease of measurement in the ambient environment, compound toxicity, reactivity, and usefulness in previous receptor modeling applications. In general, the data for sources of VOC are remarkably consistent from study to study. Because the profiles for many of the sources of VOC are controlled by physical and chemical processes (e.g. combustion) and not raw material composition, the fingerprints have general applicability.     

Characterization of organic coatings on hygroscopic salt particles and their atmospheric impacts

The photooxidation of α-pinene in the presence of NO₂, with and without added NaNO₃ seed particles, has been studied in a large-diameter flow tube. Particles formed by homogeneous nucleation and by condensation on the pre-existing seeds were sampled at various stages of the reaction, dried using four diffusion dryers, size selected at different mobility diameters (d_m) using a differential mobility analyzer (DMA), and characterized with a single particle mass spectrometer (SPLAT II). It was found that homogeneously nucleated particles are spherical, have a density (ρ) of 1.25 ± 0.02 g cm^?3 (±2σ) and contain a significant amount of organic nitrates. The mass spectra of the low volatility products condensed on the NaNO₃ seed particles were found to be virtually the same as in the case of homogeneous nucleation. The data show that the presence of even a submonolayer of organics on the NaNO₃ particles causes water retention that leads to a decrease in particle density and that the amount of water retained increases with organic coating thickness. Thicker coatings appear to inhibit water evaporation from the particle seeds altogether. This suggests that in the atmosphere, where low volatility organics are plentiful, some hygroscopic salts will retain water and have different densities and refractive indices than expected in the absence of the organic coating. This water retention combined with the organic shell on the particles can potentially impact light scattering by these particles and activity as cloud condensation nuclei (CCN), as well as heterogeneous chemistry and photochemistry on the particles.     

Water-soluble organic compounds at a mountain-top site in Colorado,USA

Water extracts of atmospheric particulate matter (PM_2.5) collected at the Storm Peak Laboratory (SPL) (3210 MSL, 40.45° N, 106.74° W) were analyzed for a wide variety of polar organic compounds. The unique geographical character of SPL allows for extended observations/sampling of the free tropospheric interface. Under variable meteorological conditions between January 9th and January14th 2007, the most abundant compounds were levoglucosan (9–72 ng m^?3), palmitic acid (10–40 ng m^?3) and succinic acid (18–27 ng m^?3). Of 84 analytes included in the GC–MS method, over 50 individual water extractable polar organic compounds (POC) were present at concentrations greater than 0.1 ng m^?3. During a snow event (Jan. 11th–13th), the concentrations of several presumed atmospheric transformation compounds (dicarboxylic acids) were reduced. Lower actinic flux, reduced transport distance, and ice crystal scavenging may explain this variability. Diurnal averages over the sampling period revealed a higher total concentration of water extractable POC at night, 211 ng m^?3 (105–265 ng m^?3), versus day, 160 ng m^?3 (137–205 ng m^?3), which suggests a more aged nighttime aerosol character. This may be due to the increased daytime convective mixing of local primary emissions from the Yampa Valley. XAD resin extracts revealed a gas-phase partitioning of several compounds, and analysis of cloud water collected at this site in 2002 revealed a similar compound abundance trend. Levoglucosan, a wood smoke tracer was generally found to be the most abundant compound in both aerosol and cloud water samples. Variations in meteorological parameters and local/regional transport analysis play an important interpretive role in understanding these results.     

Evaluation of an urban NMHC emission inventory by measurements and impact on CTM results

This paper presents an evaluation of the consistency of an urban state-of-the-art hydrocarbon (HC) emission inventory. The evaluation was conducted through the comparison of this inventory with hourly HC measurements during two summer months in the centre of Marseille, on the Mediterranean French coast. Factors of under or overestimation could be calculated for each compound on the basis of a systematic HC to HC ratio analysis. These results, associated with a deep analysis of the speciation profiles, show that most of the common and highly concentrated hydrocarbons (such as butanes) are too much predominant in the emission speciation, while the heavy and less common species (branched alkanes, substituted aromatics) are under-represented in the inventory. The urban diffuse sources appear here as one critical point of the inventories. The disagreements were shown to have a strong incidence on the representation of the air mass reactivity. In a last step, the identified uncertainties in emissions were implemented in an air-quality model for sensitivity studies. It was shown that the observed biases in the inventory could affect the regional ozone production, with a probable impact on ozone peaks of 2–10 ppbv over the area.     

Hydrological and environmental conditions as key drivers for spatial and seasonal changes in PCDD/PCDF concentrations, transport and deposition along urban cascade reservoirs

To investigate the drivers for transport and deposition of 17 2,3,7,8-substituted PCDDs/PCDFs along an urban river, water samples from five reservoirs located along the river course were collected in January and July 2008. The concentrations of 17 congeners of PCDD/PCDF were determined and compared to environmental - physical, chemical and biological - conditions. The obtained data revealed that the concentration of the sum of toxic PCDDs/PCDFs in water samples differ between reservoirs as well as between seasons, ranging from 12.04 pg L(-1) in UP (first in the cascade) to 1327.94 pg L(-1) in PR (last in the cascade) during winter of 2008; and from 34.94 pg L(-1) in UP to 1352.50 pg L(-1) in TR (next to last) in summer 2008. In comparison, water samples collected from the river had a concentration several times lower at the first two sites (sites no. 1 and 4) and no detectable values at the last three stations (sites no. 7, 8, 10). The obtained data demonstrated strong or moderate correlations between the sum of 17 PCDDs/PCDFs and TEQ in reservoir water samples and physical, chemical and biological conditions, such as: Mg(2+) (R=0.82; R=0.80, respectively), SO(4)(2-) (R=0.80; R=0.80, respectively), K(+) (R=0.80; R=0.80, respectively), Ca(2+) (R=0.67, R=0.70, respectively), OSM (R=0.63, R=0.70, respectively). In addition, the positive strong correlation between TEQ concentrations and the water temperature (R=0.63) and chlorophyll a content (R=0.90) was noted. The violent weather conditions occurred during the research season with periods of intensive storm events (up to 32 mm in mid July), and thus the increased river flow velocity (up to 0.45 m(3)s(-1)) could have a direct and indirect influence on PCDDs/PCDFs concentration through changes in the sedimentation/resuspension ratio and consequently in transport, deposition and degradation processes along the river/reservoirs.     

Multivariate analysis of mineral constituents of edible Parasol Mushroom (Macrolepiota procera) and soils beneath fruiting bodies collected from Northern Poland

Caps and stipes of 141 fruiting bodies of Parasol Mushroom (Macrolepiota procera) and surface layer of soils collected from 11 spatially distant and background (pristine) areas in Northern Poland were analyzed for Ag, Al, Ba, Ca, Cd, Co, Cr, Cu, Fe, Hg, K, Mg, Mn, Na, Ni, P, Pb, Rb, Sr, and Zn by inductively coupled plasma optical emission spectroscopy and cold vapor atomic absorption spectroscopy. In terms of bioconcentration and bioexclusion concept, K, Ag, Cu, Rb, and P were highly bioconcentrated in caps, and their bioconcentration factor values varied for the 11 sites between 120 and 500—67–420, 70–220, 10–170, and 45–100, respectively. Cd, Zn, Mg, and Na showed bioconcentration factors (BCFs) between 3.3 and 36, 3.7–15, 0.92–6.3, and 1.4–44 while Al, Ba, Ca, Co, Cr, Mn, Ni, Pb, and Sr were excluded (BCF < 1). The Parasol Mushroom is a species harvested in the wild, and its caps are of unique taste and can contain a spectrum of essential and hazardous mineral compounds accumulated at elevated concentrations, even if collected at the background (pristine) areas. These elevated mineral concentrations of the caps are due to the efficient bioconcentration potential of the species (K, Ag, Cu, Rb, P, Cd, Zn, Mg, and Na) and abundance in the soil substrates (Al, Ca, Fe, Mn). The estimated intake rates of Cd, Hg, and Pb contained in Parasol Mushroom’s caps show a cause for concern associated with these metals resulting from the consumption of between 300- and 500-g caps daily, on a frequent basis in the mushrooming season.     

Metals in edible fish from Vistula River and Dead Vistula River channel, Baltic Sea

Metals including Al, Ba, Ca, Cd, Co, Cr, Cu, Fe, Hg, K, Mg, Mn, Na, Ni, Pb, Sr and Zn were determined in muscle tissue of 12 fish species by inductively coupled plasma-atomic emission spectroscopy (ICP-AES) and cold vapour-atomic absorption spectroscopy (CV-AAS). Fish were collected from Vistula River at lower course and Dead Vistula River channel in south of Baltic Sea in Poland. The fish species examined include Round Goby (Neogobius melanostomus), Crucian Carp (Carassius carassius), Bull-rout (Myoxocephalus scorpius), Tench (Tinca tinca), Bream (Abramis brama), Burbot (Lota lot), Perch (Perca perca), Roach (Rutilus rutilus), Silver Carp (Hypophthalmichthys molitrix), Pikeperch (Stizostediun lucioperca), Brown salmon (Salmo trutta m. Trutta) and Eel (Anguilla anguilla). The median values of metal concentrations in fresh muscle tissue of 11 fish species varied as follows: Al < 0.5-60; Ba < 0.05-0.31; Ca 120-1800; Cd < 0.05-0.096; Co < 0.10; Cr < 0.10-0.50; Cu < 0.15-0.77; Fe 1.5-21; Hg 0.0058-0.65; K 1800-4200; Mg 130-560; Mn 0.12-0.59; Na 350-840; Ni < 0.2-0.31; Pb < 0.75; Sr 0.079-2.9; Zn 3.3-23 μg/g fresh weight. The Target Hazard Quotient (THQ) values calculated in this study for Cd and Hg from muscles of fish species collected from Vistula River were low in the range of 0.4 for Hg and 0.8 for Cd.