Response of two terrestrial green microalgae (Chlorophyta, Trebouxiophyceae) isolated from Cu-rich and unpolluted soils to copper stress

Some algae inhabit Cu-polluted soils. Intracellular Cu-accumulation and production of non-protein thiols in response to copper stress were compared in Stichococcus minor and Geminella terricola isolated from Cu-polluted and unpolluted soils, respectively. Cu-exposed (0.5 μM) S. minor accumulated lower amounts of copper (0.38 mM) than G. terricola (4.20 mM) and maintained 8.5-fold higher level of glutathione (GSH) than G. terricola. The ratio GSH/0.5 GSSG in the Cu-treated S. minor (7.21) was 7-times higher than in G. terricola. Reduced and oxidized forms of phytochelatins were found in both algae. Under copper stress (5 μM) the ratio -SH_total/Cu_{intracellular} in S. minor ranged from 2.3 to 6.2, while it was lower than 1.0 in G. terricola. Low intracellular Cu-accumulation and maintenance of high GSH level concomitant with PCs production seem to be responsible for a higher Cu-resistance of S. minor than G. terricola.     

Biomonitoring perfluorinated compounds in Catalonia,Spain: concentrations and trends in human liver and milk samples

Background, aim and scope  

Perfluorinated compounds (PFCs) are global environmental pollutants that bioaccumulate in wildlife and humans. Laboratory experiments have revealed toxic effects such as delayed development, humoral suppression, and hepatotoxicity. Although numerous human blood levels have been reported, little is known about distribution in the human body. Knowledge about PFC distribution and accumulation in the human body is crucial to understanding uptake and subsequent effects as well as to conduct risk assessments. The present study reports PFC levels in human liver and breast milk from a general population living in Catalonia, Spain. Liver and milk levels are compared to previously reported levels in blood from the same geographic area as well as to other existing reports on human liver and milk levels in other countries.     

Chilled ammonia process for CO2 capture

The chilled ammonia process absorbs the CO₂ at low temperature (2–10 °C). The heat of absorption of carbon dioxide by ammonia is significantly lower than for amines. In addition, degradation problems can be avoided and a high carbon dioxide capacity is achieved. Hence, this process shows good perspectives for decreasing the heat requirement. However, a scientific understanding of the processes is required. The thermodynamic properties of the NH₃–CO₂–H₂O system were described using the extended UNIQUAC electrolyte model developed by Thomsen and Rasmussen in a temperature range from 0 to 110 °C and pressure up to 100 bars. The results show that solid phases consisting of ammonium carbonate and bicarbonate are formed in the absorber. The heat requirements in the absorber and in the desorber have been studied. The enthalpy calculations show that a heat requirement for the desorber lower than 2 GJ/ton CO₂ can be reached.     

Kinetics of the tropospheric formaldehyde loss onto mineral dust and urban surfaces

The kinetics of the heterogeneous reaction between gaseous HCHO and TiO₂/SiO₂ mineral coatings were investigated using a coated-wall flow tube to mimic HCHO loss on mineral aerosol and TiO₂ coated depolluting urban surfaces. The measured uptake kinetics were strongly enhanced when the flow tube was irradiated with 340–420 nm UV light with an irradiance of 1.45 mW cm^?2. The associated BET uptake coefficients ranged from (3.00 ± 0.45) × 10^?9 to (2.26 ± 0.34) × 10^?6 and were strongly dependent on HCHO initial concentration, relative humidity, temperature, and TiO₂ content in the mineral coating, which ranged from 3.5 to 32.5 ppbv, 6–70%, 278–303 K, and 1–100 %wt, respectively. The measured kinetics were well described using a Langmuir–Hinshelwood type formalism. The estimated uptake coefficients were used to discuss the importance of heterogeneous HCHO surface loss, in terms of deposition lifetimes, as compared to major homogeneous gas-phase losses such as OH reaction and photolysis. It is found that deposition may compete with gas-phase removal of HCHO in a dense urban environment if more than 10% of the urban surface is covered with TiO₂ treated material.     

Modeling the surface–atmosphere exchange of ammonia

New parameterizations for surface–atmosphere exchange of ammonia are presented for application in atmospheric transport models and compared with parameterizations of the literature. The new parameterizations are based on a combination of the results of three years of ammonia flux measurements over a grassland canopy (dominated by Lolium perenne and Poa trivialis) near Wageningen, the Netherlands and existing parameterizations from literature. First, a model for the surface–atmosphere exchange of ammonia that includes the concentration at the external leaf surface is derived and validated. Second, a parameterization for the stomatal compensation point (expressed as Γ_s, the ratio of [NH₄⁺]/[H⁺] in the leaf apoplast) that accounts for the observed seasonal variation is derived from the measurements. The new, temperature-dependent Γ_s describes the observed seasonal behavior very well. It is noted, however, that senescence of plants and field management practices will also influence the seasonal variation of Γ_s on a shorter timescale. Finally, a relation that links Γ_s to the atmospheric pollution level of the location through the ‘long-term’ NH₃ concentration in the air is proposed.     

Sustainable nations: what do aggregate indexes tell us?

What is a ‘sustainable nation’ and how can we identify and rank ‘sustainable nations?’ Are nations producing and consuming in a sustainable way? Although several aggregate indexes have been proposed to answer such questions, comprehensive and internationally comparable data are not available for most of these. This paper quantitatively compares three aggregate indexes of sustainability: the World Bank’s ‘Genuine Savings’ measure, the ‘Ecological Footprint,’ and the ‘Environmental Sustainability Index.’ These three indexes are available for a large number of countries and also seem to be the most influential among the aggregate indexes. This paper first discusses the main limitations and weaknesses of each of these indexes. Subsequently, it shows that rankings of sustainable nations and aggregate assessments of unsustainable world population and world GDP shares vary considerably among these indexes. This disagreement leads to suggestions for analysis and policy. One important insight is that climate change, arguable the most serious threat currently faced by humanity, is not or arbitrarily captured by the indexes.     

A Generic Bio-Economic Farm Model for Environmental and Economic Assessment of Agricultural Systems

Bio-economic farm models are tools to evaluate ex-post or to assess ex-ante the impact of policy and technology change on agriculture, economics and environment. Recently, various BEFMs have been developed, often for one purpose or location, but hardly any of these models are re-used later for other purposes or locations. The Farm System Simulator (FSSIM) provides a generic framework enabling the application of BEFMs under various situations and for different purposes (generating supply response functions and detailed regional or farm type assessments). FSSIM is set up as a component-based framework with components representing farmer objectives, risk, calibration, policies, current activities, alternative activities and different types of activities (e.g., annual and perennial cropping and livestock). The generic nature of FSSIM is evaluated using five criteria by examining its applications. FSSIM has been applied for different climate zones and soil types (criterion 1) and to a range of different farm types (criterion 2) with different specializations, intensities and sizes. In most applications FSSIM has been used to assess the effects of policy changes and in two applications to assess the impact of technological innovations (criterion 3). In the various applications, different data sources, level of detail (e.g., criterion 4) and model configurations have been used. FSSIM has been linked to an economic and several biophysical models (criterion 5). The model is available for applications to other conditions and research issues, and it is open to be further tested and to be extended with new components, indicators or linkages to other models.     

Effects of soil properties on food web accumulation of heavy metals to the wood mouse (Apodemus sylvaticus)

Effects of soil properties on the accumulation of metals to wood mice (Apodemus sylvaticus) were evaluated at two sites with different pH and organic matter content of the soil. pH and organic matter content significantly affected accumulation of Cd, Cu, Pb and Zn in earthworms and vegetation. For Cd, Cu and Zn these effects propagated through the food web to the wood mouse. Soil-to-kidney ratios differed between sites: Cd: 0.15 versus 3.52, Cu: 0.37 versus 1.30 and Zn: 0.33-0.83. This was confirmed in model calculations for Cd and Zn. Results indicate that total soil concentrations may be unsuitable indicators for risks that metals pose to wildlife. Furthermore, environmental managers may, unintentionally, change soil properties while taking specific environmental measures. In this way they may affect risks of metals to wildlife, even without changes in total soil concentrations.     

Possibilities for the efficient utilisation of spent geothermal waters

Waters located at greater depths usually exhibit high mineral content, which necessitates the use of closed systems, i.e. re-injecting them into the formation after recovering the heat. This significantly reduces investment efficiency owing to the need to drill absorption wells and to perform anti-corrosion and anti-clogging procedures. In this paper, possibilities for the efficient utilisation of cooled geothermal waters are considered, particularly with respect to open or mixed geothermal water installations. Where cooled water desalination technologies are used, this allows the water to be demineralised and used to meet local needs (as drinking water and for leisure purposes). The retentate left as a by-product of the process contains valuable ingredients that can be used for balneological and/or leisure purposes. Thus, the technology for desalinating spent geothermal waters with high mineral content allows improved water management on a local scale and makes it possible to minimise the environmental threat resulting from the need to dump these waters into waterways or surface water bodies and/or inject them into the formation. The paper is concerned with Polish geothermal system and provides information about the parameters of Polish geothermal waters.