Use of fungi for the bioconversion of rice straw into cellulase enzyme

Cellulase production was carried out by solid state bioconversion (SSB) method using rice straw, a lignocellulosic material and agricultural waste, as the substrate of three Trichoderma spp. and Phanerochaete chrysosporium in lab-scale experiments. The results were compared to select the best fungi among them for the production of cellulase. Phanerochaete chrysosporium was found to be the best among these species of fungi, which produced the highest cellulase enzyme of 1.43 IU/mL of filter paper activity (FPase) and 2.40 IU/mL of carboxymethylcellulose activity (CMCase). The “glucosamine” and “reducing sugar” parameters were observed to evaluate the growth and substrate utilization in the experiments. In the case of Phanerochaete Chrysosporium, the highest glucosamine concentration was 1.60 g/L and a high concentration of the release of reducing sugar was measured as 2.58 g/L obtained on the 4th day of fermentation. The pH values were also recorded. The range of the pH was about 5.15 to 5.56 in the case of Phanerochaete Chrysosporium.     

Residue determination and dissipation of ioxynil octanoate in maize and soil

A simple and efficient residue analysis method for direct determination of ioxynil octanoate in maize and soil was developed and validated with High Performance Liquid Chromatography-Ultra Violet (HPLC-UV). The samples were extracted with mixtures of acetonitrile and deionized water followed by Solid Phase Extraction (SPE) to remove co-extractives prior to analysis by HPLC-UV. The recoveries of ioxynil octanoate extracted from maize and soil samples ranged from 86 %–104 % and 84 %–96 %, respectively, with relative standard deviation (RSD) less than 7.84% and sensitivity of 0.01 mg kg^?1. The method was applied to determine the residue of ioxynil octanoate in maize and soil samples from experimental field. Data had shown that the dissipation rate in soil was described as pseudo-first-order kinetics and the half-life (t_1/2) was less than 1.78 days. No ioxynil octanoate residue (<0.01 mg kg^?1) was detected in maize at harvest time withholding period of 60 days after treatments of the pesticide. Direct confirmation of the analytes in field trial samples was realized by Liquid Chromatography-Mass Spectrometry (LC-MS).     

Mitigation of nutrient losses via surface runoff from rice cropping systems with alternate wetting and drying irrigation and site-specific nutrient management practices

Resource-conserving irrigation and fertilizer management practices have been developed for rice systems which may help address water quality concerns by reducing N and P losses via surface runoff. Field experiments under three treatments, i.e., farmers’ conventional practice (FCP), alternate wetting and drying (AWD), and AWD integrated with site-specific nutrient management (AWD + SSNM) were carried out during two rice seasons at two sites in the southwest Yangtze River delta region. Across site years, results indicated that under AWD irrigation (i.e., AWD and AWD + SSNM), water inputs were reduced by 13.4?~?27.5 % and surface runoff was reduced by 30.2?~?36.7 % compared to FCP. When AWD was implemented alone, total N and P loss masses via surface runoff were reduced by 23.3?~?30.4 % and 26.9?~?31.7 %, respectively, compared to FCP. However, nutrient concentrations of surface runoff did not decrease under AWD alone. Under AWD + SSNM, total N and P loss masses via surface runoff were reduced to a greater extent than AWD alone (39.4?~?47.6 % and 46.1?~?48.3 % compared to FCP, respectively), while fertilizer inputs and N surpluses significantly decreased and rice grain yields increased relative to FCP. Therefore, by more closely matching nutrient supply with crop demand and reducing both surface runoff and nutrient concentrations of surface runoff, our results demonstrate that integration of AWD and SSNM practices can mitigate N and P losses via surface runoff from rice fields while maintaining high yields.     

Oil spill cleanup using graphene

In this article, we study the use of thermally reduced graphene (TRG) for oil spill cleanup. TRG was synthesized by thermal exfoliation of graphite oxide and characterized by X-ray diffusion, Raman spectroscopy, SEM, TEM, elemental analysis, and Brunauer–Emmett–Teller (BET) surface area measurement. Various aspects of the sorption process have been studied including the sorption capacity, the recovery of the adsorbed oil, and the recyclability of TRG. Our results shows that TRG has a higher sorption capacity than any other carbon-based sorbents, with sorption capacity as high as 131 g of oil per gram TRG. With recovery of the sorbed oil via filtration and reuse of TRG for up to six cycles, 1 g of TRG collectively removes approximately 300 g of crude oil. Moreover, the effects of TRG bulk density, pore volume, and carbon/oxygen ratio and the oil viscosity on the sorption process are also discussed.     

Organochlorine pesticides and polychlorinated biphenyls in soils surrounding the Tanggu Chemical Industrial District of Tianjin, China

The spatial distribution of persistent organic pollutants (POPs) was examined in soils surrounding the Tanggu Chemical Industrial District in Tianjin, China. The concentrations of hexachlorocyclohexanes (HCHs), dichlorodiphenyltrichloroethanes (DDTs), hexachlorobenzenes (HCBs), and polychlorinated biphenyls (PCBs) were determined in 70 surface soils using accelerated solvent extraction and gas chromatography with electron capture detection. The results showed that the ranges of ∑HCH, ∑DDT, ΣHCB, and ∑PCB concentrations in soils were 2.1–12,549 μg?kg^?1 (average, 965 μg?kg^?1), n.d.–2,033 μg?kg^?1 (average, 88.4 μg?kg^?1), n.d.–1,924 μg?kg^?1 (average, 349 μg?kg^?1), and n.d.–373 μg?kg^?1 (average, 46.2 μg?kg^?1), respectively. Of these, HCHs were the dominant POPs, accounting for 75 % of the total organochlorine pesticide (OCP) residues. Overall, the spatial distribution of OCP concentrations showed a decreasing trend from the center of the Tanggu District to the surrounding areas. Two major pollution sources were Tianjin Dagu Chemical Co., Ltd. in the district center and the Tianjin Chemical Plant in Hangu District. In contrast, PCB concentrations were relatively high in the Haihe estuary to the east and low to the west of the study area. Component analysis of OCPs in these soils showed that they mainly came from industrial point sources. Compared with soils in other regions, soil DDT pollution was at a medium level in the Tanggu Chemical Industrial District, but associated HCH, HCB, and PCB pollution was relatively heavy. By multivariate statistical analyses, Tianjin Dagu Chemical Co., Ltd. was recognized as the main source of POPs, and soil properties were clarified to play an important role on the distribution and composition of POPs, especially the organic carbon content.     

Transition metal-modified zinc oxides for UV and visible light photocatalysis

In order to use photocatalysis with solar light, finding more active and especially visible light active photocatalysts is a very important challenge. Also, studies of these photocatalysts should employ a standardized test procedure so that their results can be accurately compared and evaluated with one another. A systematic study of transition metal-modified zinc oxide was conducted to determine whether they are suitable as visible light photocatalysts. The photocatalytic activity of ZnO modified with eight different transition metals (Cu, Co, Fe, Mn, Ni, Ru, Ti, Zr) in three different concentrations (0.01, 0.1, and 1?at.%) was investigated under irradiation with UV as well as with visible light. The employed activity test is the gas-phase degradation of acetaldehyde as described by the ISO standard 22197-2. The results suggest that the UV activity can be improved with almost any modification element and that there exists an optimal modification ratio at about 0.1?at.%. Additionally, Mn- and Ru-modified ZnO display visible light activity. Especially the Ru-modified ZnO is highly active and surpasses the visible light activity of all studied titania standards. These findings suggest that modified zinc oxides may be a viable alternative to titanium dioxide-based catalysts for visible light photocatalysis. Eventually, possible underlying mechanisms are proposed and discussed.     

Nitrogen concentrations in mosses indicate the spatial distribution of atmospheric nitrogen deposition in Europe

In 2005/6, nearly 3000 moss samples from (semi-)natural location across 16 European countries were collected for nitrogen analysis. The lowest total nitrogen concentrations in mosses (<0.8%) were observed in northern Finland and northern UK. The highest concentrations (≥1.6%) were found in parts of Belgium, France, Germany, Slovakia, Slovenia and Bulgaria. The asymptotic relationship between the nitrogen concentrations in mosses and EMEP modelled nitrogen deposition (averaged per 50 km × 50 km grid) across Europe showed less scatter when there were at least five moss sampling sites per grid. Factors potentially contributing to the scatter are discussed. In Switzerland, a strong (r² = 0.91) linear relationship was found between the total nitrogen concentration in mosses and measured site-specific bulk nitrogen deposition rates. The total nitrogen concentrations in mosses complement deposition measurements, helping to identify areas in Europe at risk from high nitrogen deposition at a high spatial resolution.     

Analysis of surface and aerosol polarized reflectance for aerosol retrievals from polarized remote sensing in PRD urban region

A precise estimate of polarization induced by surface is crucial for polarized remote sensing dedicated to monitoring aerosol properties over urban area. The accurate knowledge of interaction between surface and aerosol polarized reflectance is essential for accurately achieving aerosol properties. In order to study surface and aerosol polarized reflectance for aerosol retrievals over urban area, a new airborne directional polarimetric camera (DPC) with high spatial resolution (4 m at 4000 m a.g.l) was developed. The surface polarized reflectance over distinct surface covers of urban area (forest, shrub, and soil) were studied using DPC measurements during a field campaign in the Pearl River Delta (PRD), China. The large variations were found in surface polarized reflectance of distinct urban covers due to surface type variability. For all surface types, the empirical BPDF model cannot describe accurately surface polarized reflectance at all possible illumination and observation geometries. From the quantitatively study of relationship between surface and aerosol polarized contribution to DPC measurements, we show that the polarized contributions of aerosol, which optical properties were defined by ground-based measurements, are much larger than the polarized contribution of surface, and found that the polarized contribution of surface covers increases with decreasing NDVI. The effect of polarization accuracy of measurements on aerosol retrieval was also investigated using DPC measurements, and found that 0.1% polarization accuracy of measurements can be neglected when AOD is retrieved using polarized measurements. Based on the information of effects of polarized reflectance differences between distinct surface covers and polarization accuracy of polarized measurements on retrieved aerosols over urban area, we found that the accuracy of aerosol retrieval over forest covers is higher than other surface types using polarized remote sensing.     

Cu fractions, mobility and bioavailability in soil-wheat system after Cu-enriched livestock manure applications

Fertilization of crops with livestock manure (LM) is a common waste disposal option, but repeated application of LM containing high concentrations of heavy metals such as Cu could lead to crop toxicity and environmental risk. To examine the Cu availability and uptake by wheat in a Mollisol affected by Cu-enriched LM, pot experiments were conducted. LM (376 mg kg⁻¹ Cu originally) was spiked with different concentrations of Cu (0, 100, 200, 400, 600 and 800 mg kg⁻¹ soil, added as CuSO₄) to simulate soil Cu contamination by LM application. The results indicated that Cu was predominately distributed in organic bound fraction, while the most drastic increase was found in reducible fraction. Acid-extractable fraction played a more important role than other fractions in controlling the mobility and bioavailability of Cu. DTPA-extractable Cu may overestimate the Cu bioavailability since DTPA solution could extract soluble and part of stable forms. The application of LM at 1% level significantly decline the Cu mobility, but that at 3% level exhibited the opposite effect.Although the quantities of Cu in wheat was very low compared with the accumulation in soil, Cu concentrations in roots increased evidently from 12 to 533 mg kg⁻¹ and that in aerial parts were in a narrow range from 12.1 to 32.7 mg kg⁻¹, indicating the more sensitivity of roots to the Cu toxicity. The Cu concentrations in grains after 3% manure application did not approach the threshold for Cu toxicity (<20 mg kg⁻¹) even at higher Cu addition rates.