Chemical and toxicological evaluation along with unprecedented transformation products during photolysis and heterogeneous photocatalysis of chloramphenicol in different aqueous matrices

Environmental Science and Pollution Research - As the presence of antibiotics in environmental waters enhances antimicrobial resistance, photolysis and heterogeneous photocatalysis of...     

Adsorption of PCDD/F on MWI fly ash

The removal of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F) from waste incinerator off-gas is a costly task, because a considerable part of the PCDD/F may exist in the gas phase (often 50-100% around 200 degrees C). The volatile fraction passes the particle filter and the subsequent gas cleaning equipment, so that an additional unit is needed to remove the gaseous PCDD/F from the flue gas. Moreover, dioxins and furans can accumulate in some parts of the equipment in a way that they can act as a latent source. In this work, we investigate the possibility to adsorb the PCDD/F at the fly ash particles and to remove them during the filtration. The gas/particle partitioning of the PCDD/F depends on the temperature, the vapor pressure, the particle size, the particle number density and on the physical and chemical properties of the particle surface. These relationships are investigated by model calculations and by pilot scale experiments (500 Nm3/h) which employ one selected hexachlorinated dioxin congener. At room temperature, approx. 90% of the HxCDD are found in the particulate phase, while at 135 degrees C that portion is only 10%. This means that at ambient temperatures, the gas/particle partitioning of the dioxin corresponds well to the sublimation equilibrium. At higher temperatures, it is much different from the sublimation equilibrium and the apparent adsorption enthalpy is smaller than the enthalpy of sublimation. This observation is in agreement with literature data. From the above experiments and from similar literature data, the efficiency of fly ash particles as a sink for PCDD/F can be evaluated. The data suggest that the adsorption rate is not the limiting factor for the transfer into the particulate phase. The important factors appear to be the chemical composition of the fly ash and the temperature.     

Results of Community Deliberation About Social Impacts of Ecological Restoration: Comparing Public Input of Self-Selected Versus Actively Engaged Community Members

Participatory processes for obtaining residents' input about community impacts of proposed environmental management actions have long raised concerns about who participates in public involvement efforts and whose interests they represent. This study explored methods of broad-based involvement and the role of deliberation in social impact assessment. Interactive community forums were conducted in 27 communities to solicit public input on proposed alternatives for recovering wild salmon in the Pacific Northwest US. Individuals identified by fellow residents as most active and involved in community affairs ("AE residents") were invited to participate in deliberations about likely social impacts of proposed engineering and ecological actions such as dam removal. Judgments of these AE participants about community impacts were compared with the judgments of residents motivated to attend a forum out of personal interest, who were designated as self-selected ("SS") participants. While the magnitude of impacts rated by SS participants across all communities differed significantly from AE participants' ratings, in-depth analysis of results from two community case studies found that both AE and SS participants identified a large and diverse set of unique impacts, as well as many of the same kinds of impacts. Thus, inclusion of both kinds of residents resulted in a greater range of impacts for consideration in the environmental impact study. The case study results also found that the extent to which similar kinds of impacts are specified by AE and SS group members can differ by type of community. Study results caution against simplistic conclusions drawn from this approach to community-wide public participation. Nonetheless, the results affirm that deliberative methods for community-based impact assessment involving both AE and SS residents can provide a more complete picture of perceived impacts of proposed restoration activities.     

地铁颗粒物特征分析及磁性过滤控制

通过SEM-EDX和XRD对采集来的地铁颗粒物（PM10和PM2.5）进行形貌和成分分析,研究结果表明：地铁颗粒物具有粒径大（可达10 μm）、形状不规则、表面具有明显的刮擦痕迹等特征,主要成分为Si、C、O和Fe;其中Fe主要以Fe3O4、Fe2O3等氧化物的形式存在。针对地铁颗粒物含铁磁的特性,采用磁性过滤控制方法对地铁颗粒物开展研究,构建的磁性过滤装置对该地铁颗粒物的捕获效果可达90%以上,在一定磁性强度范围内（0 ~ 0. 300 T）,滤网对颗粒物的捕获效果随着对其施加的磁性强度增加而提升,当施加的磁场强度为0. 300 T时,装置对地铁颗粒物的捕获效率接近100%,比相同条件下对飞灰的捕获效率高出10% ~ 15%,建议把磁过滤作为一种前处理装置用在含磁颗粒物处理上。     

The Benefits and Costs of Noise Reduction

This paper attempts to measure, in a cost-benefit analysis, a stricter noise abatement programme for noise originating from roads in Israel. Using the hedonic price method for three large cities and rural area transactions, a benefit from noise reduction was found. In order to perform a social cost-benefit analysis, a measure of benefit has been derived for 1 km of road and has been compared with the cost of noise reduction under different types of road structure. The results indicate that even though benefits have largely increased when compared to past decades (e.g. 1.2% of an average urban property value per 1 decibel reduction), the decision to insulate a given road is dependent on location and road structure. This raises the normative question of a national vs. regional standard that decision makers should be aware of and such studies could be of help in this respect.