A Profile and Management of the US Army's underground storage tanks

The US Army owns more than 10,000 underground storage tanks (USTs), many of which are old and may be leaking. The Resource Conservation and Recovery Act of 1976 required tank owners to collect and report data on them by May 1986. In order to manage the large amounts of information on its USTs, the Army developed a microcomputer-based data base system. The data base system is user friendly and allows the user to store, organize, and manipulate the UST data. A leak potential index (LPI) was also developed and calculated for each of the Army's USTs. The LPI is used to prioritize USTs so that those with higher LPIs can be monitored closely. A characteristic profile of Army USTs according to construction material, capacity, age, content, and LPI is presented in this paper.The opinions expressed in this paper are those of the authors and do not necessarily reflect the views of the US Department of the Army, nor does the mention of trade names or commercial products constitute endorsement or recommendation for use.     

Ethical obligations of veterinarians and animal scientists in animal agriculture

It is patent that society is evolving an ethic for the treatment of animals which goes well beyond the standard prohibitions against cruelty. This new ethic for animals takes the consensus ethic for the treatment of humans in society and extends it,mutatis mutandis, to the treatment of animals. Though this ethic has been applied first to research animals, its extension to agricultural animals is inevitable, and has already begun. This article explores the extent to which veterinary medicine and animal science, the major scientific fields relevant to animal agriculture, can accommodate the emerging ethic.     

MULTIVARIATE ANALYSIS OF PARAMETERS RELATED TO LAKE ACIDIFICATION IN QUEBEC1

ABSTRACT Physico-chemical data from 234 lakes were collected during the spring and summer of 1980 by the Quebec Ministry of the Environment, the Quebec Ministry of Recreation, Hunting and Fishing and the Canadian Wildlife Service. A statistical method, based on the joint use of factorial correspondence analysis and cluster analysis, was applied to these data to obtain a general picture of the spatial variability of a number of physico-chemical parameters related to the sensitivity or acidification of lakewaters. This method was first applied to the entire Quebec territory, and showed that the part of Quebec lying on the Canadian shield is especially vulnerable to acidification. The method also showed that the southwestern portion of this area of Quebec was more substantially affected by acid fallout. A detailed study of spatial variability over the shield area revealed the existence of greater spatial heterogeneity. More precisely, it was possible to pinpoint zones which are highly vulnerable to acid precipitation and zones whose lakes show clear signs of acidification resulting from such precipitation. These two statistical analyses led to a first general diagnosis on lake acidification in Quebec. They contributed to the rationalization of data acquisition in Quebec by delimitating zones where network density needs to be increased.     

GIS BASED LONG TERM HYDROLOGIC IMPACT EVALUATION FOR WATERSHED URBANIZATION1

ABSTRACT: To adequately manage impacts of ongoing or future land use changes in a watershed, the magnitude of their hydrologic impacts needs to be assessed. A grid based daily streamflow model was calibrated with two years of observed streamflow data, using time periods when land use data are available and verified by comparison of model predictions with observed streamflow data. Streamflow data were separated into direct runoff and baseflow to estimate the impacts of urbanization on each hydrologic component. Analysis of the ratio between direct runoff and total runoff from 30 years of simulation results and the change in these ratios with urbanization shows that estimated annual direct runoff increased from 49.2 percent (1973) to 63.1 percent (1984) and 65.0 percent (1991), indicating the effects of urbanization are greater on direct runoff than on total runoff. The direct runoff ratio also varies with annual rainfall, with dry year ratios larger than those for wet years. This suggests that the impact of urbanization on areas that are sensitive to runoff ratios, such as stream ecosystems, might be more serious during drier years than in wetter years in terms of water quality and water yield. This indicates that sustainable base‐flow is important to maintaining sound stream ecosystems.     

A Method for Improving the Management of Controversial Wetland

Valley bottom wetlands in agricultural landscapes often are neglected in national and regional wetland inventories. Although these areas are small, located in the bottomlands of the headwater catchments, and scattered in the rural landscape, they strongly influence hydrology, water quality, and biodiversity over the whole catchment area. Valley bottom wetlands often are considered as controversial wetlands. Awareness of the functional role of wetlands is increasing, in parallel with their progressive disappearance in intensive farming landscapes. The need to improve tools for controlling wetland management is a primary consideration for decision makers and land users. This article proposes a method for the inventory of valley bottom wetlands. The method is based on the functional analysis of potential, existing, and efficient valley bottom wetlands (the PEEW approach). Several indicators are proposed for checking the validity of such an approach. Potential wetlands are delineated by means of a topographic index using topographic and pedoclimatic criteria computed from a Digital Elevation Model and easily accessible databases. Existing wetlands are identified from observed surface moisture, the presence of specific wetland vegetation, or soil feature criteria. Efficient wetlands are defined through a given function, such as flow or pollutant regulation or biodiversity control. An analysis of areas at the limits between potential, existing, and efficient wetlands highlights land cultivated or drained in the past, which currently represents negotiating areas in which rehabilitation and other intended management actions can be implemented.     

Development of a SWAT Patch for Better Estimation of Sediment Yield in Steep Sloping Watersheds1

Abstract: The watershed scale Soil and Water Assessment Tool (SWAT) model divides watersheds into smaller subwatersheds for simulation of rainfall‐runoff and sediment loading at the field level and routing through stream networks. Typically, the SWAT model first needs to be calibrated and validated for accurate estimation through adjustment of sensitive input parameters (i.e., Curve Number values, USLE P, slope and slope‐length, and so on). However, in some instances, SWAT‐simulated results are greatly affected by the watershed delineation and Digital Elevation Models (DEM) cell size. In this study, the SWAT ArcView GIS Patch II was developed for steep sloping watersheds, and its performance was evaluated for various threshold values and DEM cell size scenarios when delineating subwatersheds using the SWAT model. The SWAT ArcView GIS Patch II was developed using the ArcView GIS Avenue program and Spatial Analyst libraries. The SWAT ArcView GIS Patch II improves upon the SWAT ArcView GIS Patch I because it reflects the topographic factor in calculating the field slope‐length of Hydrologic Response Units in the SWAT model. The simulated sediment value for 321 subwatersheds (watershed delineation threshold value of 25 ha) is greater than that for 43 subwatersheds (watershed delineation threshold value of 200 ha) by 201% without applying the SWAT ArcView GIS Patch II. However, when the SWAT ArcView GIS Patch II was applied, the difference in simulated sediment yield decreases for the same scenario (i.e., difference in simulated sediment with 321 subwatersheds and 43 subwatersheds) was 12%. The simulated sediment value for DEM cell size of 50 m is greater than that for DEM cell size of 10 m by 19.8% without the SWAT ArcView GIS Patch II. However, the difference becomes smaller (3.4% difference) between 50 and 10 m with the SWAT ArcView GIS Patch II for the DEM scenarios. As shown in this study, the SWAT ArcView GIS Patch II can reduce differences in simulated sediment values for various watershed delineation and DEM cell size scenarios. Without the SWAT ArcView GIS Patch II, variations in the SWAT‐simulated results using various watershed delineation and DEM cell size scenarios could be greater than those from input parameter calibration. Thus, the results obtained in this study show that the SWAT ArcView GIS Patch II should be used when simulating hydrology and sediment yield for steep sloping watersheds (especially if average slope of the subwatershed is >25%) for more accurate simulation of hydrology and sediment using the SWAT model. The SWAT ArcView GIS Patch II is available at http://www.EnvSys.co.kr/~swat for free download.     

Monotonic aspects of the mechanical behaviour of bottom ash from municipal solid waste incineration and its potential use for road construction

Municipal solid waste incineration (MSWI) bottom ash is an atypical granular material because it may include industrial by-products that result from the incineration of domestic waste. The prospects for the beneficial use of this particular material mainly lie in the field of road construction, as a substitute for the traditional natural aggregates. However, its mechanical properties are still little known, particularly in term of stiffness and deformability, characteristics that are essential to the construction of a durable roadway. The purpose of this paper is to describe better the mechanical behaviour of this recycled material. In order to reach this objective, a large experimental campaign is presented. The first part of this paper presents and comments in detail on the results obtained from static monotonic tests. Oedometric and triaxial shear tests were performed on MSWI bottom ash both before and after treatment with a specific hydraulic binder. These tests allow specification of the mechanical characteristics of the MSWI bottom ash, such as the initial Young's modulus, Poisson's ratio, the compressibility index, the friction angle, and the contracting or dilating behaviour of the material. The results reveal a mechanical behaviour similar to that of initially dense standard materials (sands, unbound granular materials) and a dependence on the applied average pressure, characteristic of the mechanical behaviour of granular media. More laboratory data on other samples of MSWI bottom ash are required to ensure that this comparison is statistically valid.     

A new method for modelling roofing materials emissions on the city scale: Application for zinc in the City of Créteil (France)

Today, urban runoff is considered as an important source of environmental pollution. Roofing materials, in particular, the metallic ones, are considered as a major source of urban runoff metal contaminations. In the context of the European Water Directive (2000/60 CE), an accurate evaluation of contaminant flows from roofs is thus required on the city scale, and therefore the development of assessment tools is needed. However, on this scale, there is an important diversity of roofing materials. In addition, given the size of a city, a complete census of the materials of the different roofing elements represents a difficult task. Information relating roofing materials and their surfaces on an urban district do not currently exist in urban databases. The objective of this paper is to develop a new method of evaluating annual contaminant flow emissions from the different roofing material elements (e.g., gutter, rooftop) on the city scale. This method is based on using and adapting existing urban databases combined with a statistical approach. Different rules for identifying the materials of the different roofing elements on the city scale have been defined. The methodology is explained through its application to the evaluation of zinc emissions on the scale of the city of Créteil.     

Brown rust disease control in winter wheat: I. Exploring an approach for disease progression based on night weather conditions

An empirical approach for simulating the infection and progress of leaf rust (caused by Puccinia triticina) during stem elongation on winter wheat was analysed for the 2000 to 2006 growing seasons. The approach was elaborated based on night weather conditions (i.e., air temperature, relative humidity and rainfall) and leaf rust occurrences. Data from three consecutive cropping seasons (2000–2002) at four representative sites of the Grand-Duchy of Luxembourg were used in the set-up phase. The capability to correctly simulate the occurrence expression of P. triticina infections on the upper leaf layers was then assessed over the 2003–2006 period. Our study revealed that the development of leaf rust required a period of at least 12 consecutive hours with air temperatures ranging between 8 and 16 °C, a relative humidity greater than 60 % (optimal values being 12–16 °C and up to 80 % for air temperatures and relative humidity, respectively) and rainfall less than 1 mm. Moreover, leaf rust occurrences and infections were satisfactorily simulated. The false alarm ratio was ranged from 0.06 to 0.20 in all the study sites. The probability of detection and critical success index for WLR infection were also close to 1 (perfect score).     

A fully reproductive fighting morph in a soldier clade of gall-inducing thrips (Oncothrips morrisi)

We present the first life history data for Oncothrips morrisi, a species in a clade of haplodiploid, Australian gall-inducing thrips that has a micropteran fighting morph in the first generation of the gall. Micropterans in other species in the clade have lower fecundity than their mother, and these species are considered eusocial. There is no such reproductive skew in O. morrisi, and the species is not eusocial by any definition. The volume of O. morrisi galls is between 4 and 20 times greater in than eusocial species in the clade and the dispersing-brood size varies between 5 and 15 times larger than that of other species. The lack of skew in O. morrisi could be associated with large gall volume, reducing competition between females for space and feeding sites for their offspring. As O. morrisi is in a lineage basal to eusocial Oncothrips, we also discuss selective factors for the evolution of a non-dispersing fighting morph in this clade. The costs involved in dispersal and latency to reproduction may have lowered the selective threshold for the evolution of a non-dispersing morph. Once non-dispersal evolved, selection to defend one's offspring may have promoted the evolution of soldier-like morphology and behaviour.