Aggregation and foraging behavior of whirligig beetles (Gyrinidae)

Summary Whirligig beetles aggregate in the daytime into dense single-and multispecies groups (rafts) of hundreds or thousands of individuals. On the 22km shoreline of Lake Itasca in northern Minnesota, these aggregations were on the average 0.8 km apart, and they were usually found day after day in the same ocations.Most beetles apparently do not home to the aggregation of their origin after dispersing at night because (a) the species composition of some aggregations changed greatly, and (b) paint-marked beetles (Dineutus horni) moved overnight from one aggregation as far as 4km, joining 11 of the 14 large (>300 beetles) D. horni groups on the lake.Throughout the night, the largest concentrations of beetles remained within 100m of the diurnal aggregation sites. Beetles reconvened into the compact rafts before daybreak, in part by following each other in sometimes long single files or trains. Their forward motion stopped after they joined large number of other beetles. We infer that following behavior enables those individuals that have dispersed from their original aggregations (during their nocturnal foraging) to find and join other aggregations before daylight.Naive fish ate the beetles despite their noxious secretions. However, fish living near rafting sites and feeding on insects on the water surface in daylight should soon learn to avoid the beetles. The rafting sites would then become safe places. We observed fish attacking only those beetles that had been either dispersed from their rafts or released into open water away from raft sites in the daytime. We speculate that the evolutionary significance of the aggregation behavior is related to predator (fish) avoidance.     

Early maps as stepping stones for the reconstruction of historic ecological conditions and biota

We reconstructed the flora of a European region at a historical point in time from historical topographical maps that contain rather precise information about the condition and composition of habitats. The ecological information obtained from these maps can be enriched through the potential of broadly diversified archival information. This study is confined to grassland communities. Considerations in terms of phytosociology make historical lists of plant species a good starting point for the reconstruction of grassland communities. The combination of historical and scientific methods proves suitable for reconstructing specific historical environmental conditions. Taking into account the frequency of relevant historical sources in European archives as well as in archives abroad, this approach claims for far-reaching application to ecosystem restoration matters, especially if ecological information from natural sources is missing.     

Significance of platinum group metals emitted from automobile exhaust gas converters for the biosphere

Intention, Goal, Scope, Background  Following the introduction of automobile catalytic converters the platinum group metals (PGM) platinum (Pt), palladium (Pd) and rhodium (Rh) gain on increasing interest in environmental research as these metals are emitted with exhaust fumes into the environment. Consequently, elevated PGM levels were found in different environmental matrices uch as road dusts, soils along heavily frequented roads, sediments of urban rivers etc. Accordingly, the effects of increasing PGM emissions on the biosphere are controversially discussed. Objective  This paper summarizes the present knowledge on the biological availability of PGM to plants and animals. As biological availability is one of the most decisive factors determining the toxicologi-cal potential of xenobiotics, this information is very important to evaluate the possible threat of the noble metals to ecosystems. Results and Discussion  The availability of soluble as well as particle bound PGM to terrestrial plants was demonstrated in several studies. Experimental investigations revealed uptake of Pt, Pd and Rh also by aquatic plants. Additionally, the biological availability of the noble metals for animals has been verified in experimental studies using soluble metal salts, catalytic converter model substances, sediments of urban rivers, road dust or tunnel dust as metal sources. These studies refer mainly to aquatic animals. Beside of free living organisms, in particular worms parasitizing fish demonstrated a high potential to accumulate PGM. This could be of great interest in respect of biomonitoring purposes. Generally, for plants as well as for animals Pd turns out to be the best available metal among the PGM. Compared to other heavy metals, the biological availability of PGM from road dust to zebra mussels(Dreissena polymorpha) ranged between that of Cd and Pb. Conclusion  Especially chronic effects of PGM on the biosphere can not be excluded due to (1) their cumulative increase in the environment, (2) their unexpected high biological availability and bioaccumulation and (3) their unknown toxicological and ecotoxicological potential. However, it appears that acute effects on ecosystems due to anthropogenic PGM emission are not likely. Recommendation and Outlook  Research on environmental PGM contamination of the biosphere, especially the fauna, and on long-term toxiciry of low PGM concentrations is highly appreciated. These studies require very sensitive analytical techniques to determine PGM even in low sample amounts. Research has to be done in particular on reliable determination of (ultra) trace levels of Pd and Rh as the lack of data on these two metals is mainly due to analytical problems.     

Modeling the Entrepe?as Reservoir.

The Entrepe?as Reservoir is a monomictic reservoir located in River Tagus (Spain). The aim of this work is to establish a feasible model to predict the depth of the thermocline that is developed in the reservoir during the period of natural thermal stratification. Entrainment, eddy diffusion, inflow of external energy, and other factors are considered to calibrate the parameters of the model. The methodology involves the measure of actual temperature and electrical conductivity profiles, use of meteorological data and reservoir parameters, and selection and application of several models from the literature. The calculations and predictions are integrated to a software packet that is able to predict thermocline depth and water temperature profile during a 1-year period on a day-by-day basis. In the thermocline depth, the prediction error, on the basis of real data, is less than 6% and, in the water temperature, it is 2 degrees C.     

Evaluating non-equilibrium solute transport in small soil columns

Displacement studies on leaching of bromide and two pesticides (atrazine and isoproturon) were conducted under unsaturated steady state flow conditions in 24 small undisturbed soil columns (5.7 cm in diameter and 10 cm long) each collected from two sites differing in soil structure and organic carbon content in North Germany. There were large and irregular variabilities in the characteristics of both soils, as well as in the shapes of breakthrough curves (BTCs) of different columns, including some with early breakthrough and increased tailing, qualitatively indicating the presence of preferential flow. It was estimated that one preferential flow column (PFC) at site A, and four at site B, contributed, respectively to 11% and 58% of the accumulated leached fraction and to more than 80% of the maximum observed standard deviation (SD) in the field-scale concentration and mass flux of pesticides at two sites. The bromide BTCs of two sites were analyzed with the equilibrium convection-dispersion equation (CDE) and a non-equilibrium two-region/mobile-immobile model. Transport parameters of these models for individual BTCs were determined using a curve fitting program, CXTFIT, and by the time moment method. For the CDE based equilibrium model, the mean values of retardation factor, R, considered separately for all columns, PFCs or non-preferential flow columns (NPFCs) were comparable for the two methods; significant differences were observed in the values of dispersion coefficients of two sites using the two estimation methods. It was inferred from the estimated parameters of non-equilibrium model that 5-12% of water at site A, and 12% at site B, was immobile during displacement in NPFCs. The corresponding values for PFCs of two sites were much larger, ranging from 25% to 51% by CXTFIT and from 24% to 72% by the moment method, suggesting the role of certain mechanisms other than immobile water in higher degrees of non-equilibrium in these columns. Peclet numbers in PFCs of both sites were consistently smaller than five, indicating the inadequacy of the non-equilibrium model to incorporate the effect of all forms of non-equilibrium in PFCs. Overall, the BTCs of individual NPFCs, PFCs and of field average concentration at the two sites were better reproduced with parameters obtained from CXTFIT than by the moment method. The moment method failed to capture the peak concentrations in PFCs, but tended to describe the desorption and tail branches of BTCs better than the curve fitting approach.     

A review of biomarker compounds as source indicators and tracers for air pollution

An overview of the application of organic geochemistry to the analysis of organic matter on aerosol particles is presented here. This organic matter is analyzed as solvent extractable bitumen/ lipids by gas chromatography-mass spectrometry. The organic geochemical approach assesses the origin, the environmental history and the nature of secondary products of organic matter by using the data derived from specific molecular analyses. Evaluations of production and fluxes, with cross-correlations can thus be made by the application of the same separation and analytical procedures to samples from point source emissions and the ambient atmosphere. This will be illustrated here with typical examples from the ambient atmosphere (aerosol particles) and from emissions of biomass burning (smoke). Organic matter in aerosols is derived from two major sources and is admixed depending on the geographic relief of the air shed. These sources are biogenic detritus (e.g., plant wax, microbes, etc.) and anthropogenic particle emissions (e.g., oils, soot, synthetics, etc.). Both biogenic detritus and some of the anthropogenic particle emissions contain organic materials which have unique and distinguishable compound distribution patterns (C₁₄-C₄₀). Microbial and vascular plant lipids are the dominant biogenic residues and petroleum hydrocarbons, with lesser amounts of the pyrogenic polynuclear aromatic hydrocarbons (PAH) and synthetics (e.g., chlorinated compounds), are the major anthropogenic residues. Biomass combustion is another important primary source of particles injected into the global atmosphere. It contributes many trace substances which are reactants in atmospheric chemistry and soot paniculate matter with adsorbed biomarker compounds, most of which are unknown chemical structures. The injection of natural product organic compounds into smoke occurs primarily by direct volatilization/steam stripping and by thermal alteration based on combustion temperature. Although the molecular composition of organic matter in smoke particles is highly variable, the molecular tracers are generally still source specific. Retene has been utilized as a tracer for conifer smoke in urban aerosols, but is not always detectable. Dehydroabietic acid is generally more concentrated in the atmosphere from the same emission sources. Degradation products from biopolymers (e.g., levoglucosan from cellulose) are also excellent tracers. An overview of the biomarker compositions of biomass smoke types is presented here. Defining additional tracers of thermally-altered and directly-emitted natural products in smoke aids the assessment of the organic matter type and input from biomass combustion to aerosols. The precursor to product approach of compound characterization by organic geochemistry can be applied successfully to provide tracers for studying the chemistry and dispersion of ambient aerosols and smoke plumes. Presented at the 6th FECS Conference on Chemistry and the Environment, Atmospheric Chemistry and Air Pollution, August 26–28, 1998, Copenhagen.     

Large-sample-size assessment of socioeconomic predictors of community-level resource management occurrence

Community-level resource management efforts are cornerstones in ensuring sustainable use of natural resources. Yet, understanding how community characteristics influence management practices remains contested. With a sample size of ≥725 communities, we assessed the effects of key community (i.e., socioeconomic) characteristics (human population size and density, market integration, and modernization) on the probability of occurrence of fisheries management practices, including gear, species, and spatial restrictions. The study was based in Solomon Islands, a Pacific Island country with a population that is highly dependent on coastal fisheries. People primarily dwell in small communities adjacent to the coastline dispersed across 6 island provinces and numerous smaller islands. We used nationally collected data in binomial logistic regression models to examine the likelihood of management occurrence, given socioeconomic context of communities. In contrast to prevailing views, we identified a positive and statistically significant association between both human population size and market integration and all 3 management practices. Human population density, however, had a statistically significant negative association and modernization a varied and limited association with occurrence of all management practices. Our method offers a way to remotely predict the occurrence of resource management practices based on key socioeconomic characteristics. It could be used to improve understanding of why some communities conduct natural resource management activities when statistical patterns suggest they are not likely to and thus improve understanding of how some communities of people beat the odds despite limited market access and high population density.     

Genetic diversity and population structure of the Chinese mitten crab <Emphasis Type="Italic">Eriocheir sinensis</Emphasis> in its native range

The Chinese mitten crab Eriocheir sinensis is an indigenous and economically important species in China, but can also be found as invasive species in Europe and America. Mitten crabs have been exploited extensively as a food resource since the 1990s. Despite its ecological and economic importance, the genetic structure of native mitten crab populations is not well understood. In this paper, we investigated the genetic structure of mitten crab populations in China by screening samples from ten locations covering six river systems at six microsatellite loci. Our results provide further evidence that mitten crabs from the River Nanliujiang in Southern China are a genetically differentiated population within the native range of Eriocheir, and should be recognized as a separate taxonomic unit. In contrast, extremely low levels of genetic differentiation and no significant geographic population structure were found among the samples located north of the River Nanliujiang. Based on the reproductive biology of mitten crabs and the geography of their habitat we argue that both natural and human-mediated gene flow are unlikely to fully account for the similar allele frequency distributions at microsatellite loci. Large population sizes of mitten crabs suggest instead that a virtual absence of genetic drift and significant homoplasy of microsatellite alleles have contributed to the observed pattern. Furthermore, a coalescent-based maximum likelihood method indicated a more than two-fold lower effective population size of the Southern population compared to the Northern Group and low but significant levels of gene flow between both areas.     

A model for estimation of potential generation of waste electrical and electronic equipment in Brazil

Sales of electrical and electronic equipment are increasing dramatically in developing countries. Usually, there are no reliable data about quantities of the waste generated. A new law for solid waste management was enacted in Brazil in 2010, and the infrastructure to treat this waste must be planned, considering the volumes of the different types of electrical and electronic equipment generated.This paper reviews the literature regarding estimation of waste electrical and electronic equipment (WEEE), focusing on developing countries, particularly in Latin America. It briefly describes the current WEEE system in Brazil and presents an updated estimate of generation of WEEE. Considering the limited available data in Brazil, a model for WEEE generation estimation is proposed in which different methods are used for mature and non-mature market products.The results showed that the most important variable is the equipment lifetime, which requires a thorough understanding of consumer behavior to estimate. Since Brazil is a rapidly expanding market, the “boom” in waste generation is still to come. In the near future, better data will provide more reliable estimation of waste generation and a clearer interpretation of the lifetime variable throughout the years.