Response of zooxanthellae in symbiosis with the Mediterranean corals Cladocora caespitosa and Oculina patagonica to elevated temperatures

Scleractinian symbiotic corals living in the Ligurian Sea (NW Mediterranean Sea) have experienced warm summers during the last decade, with temperatures rapidly increasing, within a few days, to 3–4°C above the mean value of 24°C. The effect of elevated temperatures on the photosynthetic efficiency of zooxanthellae in symbiosis with temperate corals has not been well investigated. In this study, the corals, Cladocora caespitosa and Oculina patagonica were collected in the Ligurian Sea (44°N, 9°E), maintained during 2 weeks at the mean summer temperature of 24°C and then exposed during 48 h to temperatures of 24 (control), 27, 29 and 32°C. Chlorophyll (chl) fluorescence parameters [F _v/F _m, electron transport rate (ETR), non-photochemical quenching (NPQ)] were measured using pulse amplitude modulated (PAM) fluorimetry before, during the thermal increase, and after 1 and 7 days of recovery (corals maintained at 24°C). Zooxanthellae showed a broad tolerance to temperature increase, since their density remained unchanged and there was no significant reduction in their maximum quantum yield (F _v/F _m) or ETR up to 29°C. This temperature corresponded to a 5°C increase compared to the mean summer temperature (24°C) in the Ligurian Sea. At 32°C, there was a significant decrease in chl contents for both corals. This decrease was due to a reduction in the chl/zooxanthellae content. For C. caespitosa, there was also a decrease in ETR_max, not associated with a change in F _v/F _m or in the non-photochemical quenching (NPQ); for O. patagonica, both ETR_max and F _v/F _m significantly decreased, and NPQ_max showed a significant increase. Damages to the photosystem II appeared to be reversible in both corals, since F _v/F _m values returned to normal after 1 day at 24°C. Zooxanthellae in symbiosis with the Mediterranean corals investigated can therefore be considered as resistant to short-term increases in temperature, even well above the maximum temperatures experienced by these corals in summer.     

Etude des bactéries associées aux Algues marines en culture

Some bacteria strains have been isolated from marine algae cultures and assigned tentative genera and species. Observations and tests were conducted using Bergey's manual and specific papers on marine bacteria as taxonomic keys. The genera Pseudomonas, Flavobacterium and Achromobacter appear to be the most important, as far as the number of species is concerned.     

Biodiversity of marine sessile epifauna at an Aegean island subject to hydrothermal activity: Milos, eastern Mediterranean Sea

Sessile macroepifauna was sampled at six rocky sites between 2 and 90 m depth with a number of different methods involving both underwater photography and collection of specimens. A total of 212 species (or varieties) were identified, belonging to seven higher taxa: poriferans (24 species), cnidarians (32), molluscs (8), serpuloidean polychaetes (33), bryozoans (90), brachiopods (4) and ascidians (21). The combined use of a varied array of sampling methods was effective in obtaining a rich faunal inventory. Deep and offshore sites tended to be richer in species than shallow and inshore sites. In all cases species richness was higher at sites closest to hydrothermal vents on the sea floor. Although there are no comparable inventories of marine sessile epifauna in the Aegean, the high number of species found, with a relatively low sampling effort in a restricted area, indicates that the marine biodiversity of this sea is not as low as traditionally believed. Received: 20 January 1999 / Accepted: 25 August 1999     

Drawing the baseline of trace element levels in the vulnerable Mediterranean osprey Pandion haliaetus: variations by breeding location,habitats, and egg components

Environmental Science and Pollution Research - Due to its peculiarity to accumulate environmental contaminants, the osprey Pandion haliaetus is a sentinel species for the biomonitoring of...     

Retrieving surface deformation by PSInSAR™ technology: A powerful tool in reservoir monitoring

Reservoir monitoring improves our understanding of reservoir behaviour and helps achieve more effective reservoir management and prediction of future performance with obvious economic benefits. It relies on an integrated approach involving both surveillance (well or surface based; seismic, electrical, leakage, flow and deformation measurements, etc.) and modelling. Surface deformation monitoring can provide valuable constraints on the dynamic behaviour of a reservoir enabling the evaluation of volumetric changes in the reservoir through time. Levelling campaigns, tiltmeters, GPS permanent stations and Permanent Scatterer SAR Interferometry (PSInSAR™) are the techniques most widely used to determine surface displacements. Whatever the surveying technique, the detection of millimetre-level surface deformation is required to monitor small surface displacement rates that could impact risk evaluation and land use planning. Depending on depth and reservoir/overburden rheology, volumetric changes in reservoirs due to fluid extraction and injection can induce either subsidence or uplift that could trigger fault reactivation and threaten well integrity; deformation may also be detectable at the surface. Mapping surface effects accurately requires hundreds of observation points per km² which cannot be delivered by traditional monitoring methods without unacceptably large expenditure. PSInSAR™ is one of the most promising and cost-effective techniques capable of providing high precision and high areal density displacement measurements over long periods of time. Moreover, the availability of PS data for both ascending and descending orbits enables the estimation of both vertical and E–W horizontal displacement fields. Two case histories will be presented to illustrate the advantages of PSInSAR™ technology for the detection of surface deformation induced by reservoir exploitation and monitoring of its evolution though time.     

Optimization of animal manure vermicomposting based on biomass production of earthworms and higher plants

The goal of this study was to optimize the mixture of swine manure (SM) and cattle manure (CM) used in the vermicomposting process, seeking to increase the manure biodegradation rate and enhance the biomass production of both earthworms and higher plants. To achieve this goal, physico-chemical parameters were determined to assess the final compost quality after 50 days of vermicomposting. The different manure ratios used to produce the composts (C) were as follows (SM:CM, % m/m basis): C1 100:0, C2 (75:25), C3 (50:50), C4 (25:75), and C5 (0:100). In addition, the earthworm biomass and the phytoproductivity of lettuce (Lactuca sativa L.) plants grown in mixtures (1:1) of natural soil and the most viable vermicomposts were investigated. The C1 and C2 compost compositions were associated with high earthworm mortality rates. The C3 compost provided the highest mineral concentrations and C5 showed the highest lettuce yield (wet biomass). The results verify that stabilized cattle manure is an excellent substrate for the vermicomposting process and that fresh swine manure must be mixed with pre-stabilized cattle manure to ensure an optimized vermicomposting process, which must be controlled in terms of temperature and ammonia levels. It is concluded that small livestock farmers could add value to swine manure by applying the vermicomposting process, without the need for high investments and with a minimal requirement for management of the biodegradation process. These are important technical aspects to be considered when circular economy principles are applied to small farms.     

An integrated approach to understanding the sorption mechanism of phenanthrene by cork

Previous studies have shown the high sorption affinity of polycyclic aromatic hydrocarbons by cork. The aim of the present work is to go further by investigating the sorption mechanism of polycyclic aromatic hydrocarbons (exemplified by phenanthrene) on cork and the availability of the chemical components (i.e. lignin, suberin, holocellulose and extractives) to retain phenanthrene.Two approaches were integrated to reach this objective: (1) statistical multivariate analysis to obtain correlations between the sorption capacity, measured as K_oc, and the sorbent properties (i.e. polarity, acidic functional groups, %dichloromethane extractives, %ethanol and water extractives, %suberin, %lignin and %holocellulose) and (2) modeling calculations to obtain information on interaction at the molecular level.The statistical multivariate analysis demonstrated a strong and positive correlation between K_oc and the lignin content as well as negative correlations between K_oc and the phenolic groups and %dichloromethane extractives contents. The modeling study showed that the lignin–phenanthrene interaction is mostly hydrophobic in nature being largely determined by the π-stacking interaction between the aromatic groups of the interacting partners. This result justifies the observed correlations as dichloromethane extractives, being hydrophobic, compete with phenanthrene adsorption, whereas phenolic groups, as well as negatively charged groups, enhance the hydrophilic character of the sorbent surface, thus hindering the adsorption of phenanthrene.