THE FATE OF NITRATE IN LAKE SEDIMENT COLUMNS1

ABSTRACT: To investigate the magnitude of denitrification and assimilatory nitrate reduction as these reactions relate to the fate of nitrate reaching sediments via groundwater seepage, undisturbed core samples of sediments (40 cm length) from two lakes (Mendota and Tomahawk) were leached from the bottom (at 1.4 cm/day) with a solution of ¹⁵N-nitrate (10 mg N/liter). The sediment columns were fitted with Pt electrodes to measure the oxidation-reduction (Eh) potential. While leaching removed considerable ammonium-N and soluble organic N, essentially no ¹⁵N had passed through the columns by 50 days. The Eh readings indicated that denitrification was occurring in the lower portions of the columns. The ¹⁵N distribution of the sediment N after 50 days showed that about 15 to 26% of the added nitrate-N was converted to organic N and ammonium-N. The data show that denitrification can be a significant N sink in seepage lakes.     

起重机械超速保护开关检测装置设计及应用

针对起重机械超速保护开关定期检验无定量检测手段的问题,设计了一种超速保护开关检测装置。该装置由测试台、安装架和测控系统组成。超速保护开关固定在安装架上,通过联接器与变频电动机联接并同步旋转。测控系统通过微处理器处理超速保护开关转速信号和触头动作信号,实现对其整定值的检测。试验表明,该检测装置可以准确测定超速保护开关整定值,为检验人员判定超速保护开关合格性提供定量标准。     

Glass–ceramic from mixtures of bottom ash and fly ash

Along with the gradually increasing yield of the residues, appropriate management and treatment of the residues have become an urgent environmental protection problem. This work investigated the preparation of a glass–ceramic from a mixture of bottom ash and fly ash by petrurgic method. The nucleation and crystallization kinetics of the new glass–ceramic can be obtained by melting the mixture of 80% bottom ash and 20% fly ash at 950 °C, which was then cooled in the furnace for 1 h. Major minerals forming in the glass–ceramics mainly are gehlenite (Ca₂Al₂SiO₇) & akermanite (Ca₂MgSiO₇) and wollastonite (CaSiO₃). In addition, regarding chemical/mechanical properties, the chemical resistance showing durability, and the leaching concentration of heavy metals confirmed the possibility of engineering and construction applications of the most superior glass–ceramic product. Finally, petrurgic method of a mixture of bottom ash and fly ash at 950 °C represents a simple, inexpensive, and energy saving method compared with the conventional heat treatment.     

Assessing the sustainability of major cities in China

Rapid urbanization in the developing world calls for attention to address the issue of urban sustainability, especially in emerging countries such as China, where social equity and environmental conditions have been marginalized by the rapid economic development. In this paper, we addressed the above issue with an attempt to answer the following questions: (1) How did the sustainability of Chinese cities evolve over time? (2) What are the driving forces for the evolution? By constructing a composite index that incorporates three major aspects of sustainability, economy, environment, and social equity, we characterized the recent evolution of Chinese cities and assessed the disparity among regions in terms of the sustainability measures. Further, we analyzed the driving forces for the change of sustainability indices through a driving force-pressure-state-effect model. We substantiate our numerical analysis of Chinese cities with a detailed case study of Urumqi, the capital of Xinjiang Autonomous Region, which has experienced significant change over the past 3 decades in every aspect of sustainability. We highlight some fundamental socioeconomic driving forces that have caused spatial restructuring, reflected by land-use change, and consequently impacted the urban environment of Urumqi. A brief case analysis of Guangzhou is also provided.     

Quantification and reduction of erroneous differences between images in remote sensing

The reliability of image data, along with the difficulty of accurately comparing images acquired at different times or from different sensors, is a generic problem in remote sensing. Measurement repeatability errors occur frequently and can substantially reduce the system’s ability to reliably quantify real spectral and spatial change in a target. This paper outlines methodologies for quantifying and reducing erroneous differences between monochrome and multispectral or hyperspectral images. [Each of these image types is acquired by an instrument that collects light photons across a variable range of the electromagnetic spectrum (often referred to as an image band). The hyperspectral image is often referred to as a hyperspectral cube with XY spatial dimensions and many Z bands (spectral demotions)]. In this paper, we specifically discuss the Pixel Block Transform (PBT), the Spectral Averaging Transform (SAT), and the Wavelet Transform (WAVEL). We briefly address sensor fusion. Results indicate that the PBT is a powerful cross-noise and repeatability error reducing tool, applicable to monochrome, multispectral, and hyperspectral images. The SAT is as powerful as the PBT in reducing error but is suitable only for hyperspectral imagery. WAVEL can reduce some of the finer scale noise, but it is not as powerful in reducing cross-noise as PBT or SAT and it requires some trial and error for selecting the appropriate wavelet function. It is important that those involved in developing statistically sound relationships between remotely sensed imagery and other data sources understand the problems and their solutions to prevent wasting time or developing relationships that are statistically insignificant or unstable, or that lead to faulty conclusions.     

The morphogenesis of ephyra in Coronatae (Cnidaria,Scyphozoa)

The morphogenesis of ephyrae of Atorella vanhoeffeni Bigelow, 1909 (Werner, 1967) and of Nausithoe maculata Jarms, 1990 during strobilation is described. We found differences in the developmental pattern of marginal structures and structural changes of longitudinal muscle tubes in particular. During strobilation the polyp’s tetraradiate symmetry is passed to the ephyra of both taxa as a tetraradiate central symmetry that we consider a major plesiomorphic character. The present results also indicate divergent patterns of ephyra development during strobilation that lead to variable marginal symmetries of ephyrae and thus of medusae. Therefore, the marginal symmetry of medusae of N. maculata is octoradiate and of A. vanhoeffeni is hexaradiate. We conclude the latter is stated as derived pattern. These results lead us to maintain both families Nausithoidae and Atorellidae.     

Controlling enzymatic activity by immobilization on graphene oxide

In this study, graphene oxide (GO) has been applied as a matrix for enzyme immobilization. The protein adsorption capacity of GO is much higher than of other large surface area carbonaceous materials. Its structure and physicochemical properties are reported beneficial also for enzymatic activity modifications. The experimental proof was done here that GO-based biocatalytic systems with immobilized catalase are modifiable in terms of catalyzed reaction kinetic constants. It was found that activity and stability of catalase, considered here as model enzyme, closely depend on enzyme/GO ratio. The changes in kinetic parameters can be related to secondary structure alterations. The correlation between enzyme/GO ratio and kinetic and structure parameters is reported for the first time and enables the conscious control of biocatalytic processes and their extended applications. The biological activity of obtained biocatalytic systems was confirmed in vitro by the use of functional test. The addition of immobilized catalase improved the cells’ viability after they were exposed to hydrogen peroxide and tert-butyl-hydroperoxide used as source of reactive oxygen species.