Reduction of pollutants in pulp paper mill effluent treated by PCP-degrading bacterial strains

Two PCP-degrading bacterial strains, Bacillus cereus (ITRC-S6) and Serratia marcescens (ITRC-S7) were used for the treatment of pulp and paper mill effluent at conditions; 1.0% glucose and 0.5% peptone at 30 +/- 1 degrees C at 120 rpm for 168 h of incubation. These two bacterial strains effectively reduced colour (45-52%), lignin (30-42%), BOD (40-70%), COD (50-60%), total phenol (32-40%) and PCP (85-90%) within 168 h of incubation. However, the highest reduction in colour (62%), lignin (54%), BOD (70%), COD (90%), total phenol (90%) and PCP (100%) was recorded by mixed culture treatment. The bacterial mechanism for the degradation of pulp and paper mill effluent may be explained by an increase in the cells biomass using added co-substrates resulting liberation of significant amount of chloride due to bacterial dechlorination of chlorolignins and chlorophenols this showed reduction in colour, lignin and toxicity in the effluent. Further, GC-MS analysis of ethyl acetate-extractable compounds from treated pulp paper mill effluent reinforces the bacterium capability for the degradation of lignin and pentachlorophenol, as many aromatic compounds such as 2-chlorophenol, 2, 4, 6-trichlorophenol and tetrachlorohydroquinone, 6-chlorohydroxyquinol and tetrachlorohydroquinone detected which were not present in the untreated effluent.     

Pesticide residue level in tea ecosystems of Hill and Dooars regions of West Bengal, India

In the present study we quantified the residues of organophosphorus (e.g. ethion and chlorpyrifos), organochlorine (e.g. heptachlor, dicofol, alpha-endosulfan, beta-endosulfan, endosulfan sulfate) and synthetic pyrethroid (e.g. cypermethrin and deltamethrin) pesticides in made tea, fresh tea leaves, soils and water bodies from selected tea gardens in the Dooars and Hill regions of West Bengal, India during April and November, 2006. The organophosphorus (OP) pesticide residues were detected in 100% substrate samples of made tea, fresh tea leaves and soil in the Dooars region. In the Hill region, 20% to 40% of the substrate samples contained residues of organophosphorus (OP) pesticides. The organochlorine (OC) pesticide residues were detected in 33% to 100% of the substrate samples, excluding the water bodies in the Dooars region and 0% to 40% in the Hill region. The estimated mean totals of studied pesticides were higher in fresh tea leaves than in made tea and soils. The synthetic pyrethroid (SP) pesticide residues could not be detected in the soils of both the regions and in the water bodies of the Dooars. Sixteen percent and 20% of the made tea samples exceeded the MRL level of chlorpyrifos in Dooars and Hill regions respectively. The residues of heptachlor exceeded the MRL in 33% (April) and 100% (November) in the Dooars and 40% (April) and 20% (November) in the Hill region. Based on the study it was revealed that the residues of banned items like heptachlor and chlorpyrifos in made tea may pose health hazards to the consumers.     

Underwater LNG release: Does a pool form on the water surface? What are the characteristics of the vapor released?

One of the scenarios of concern in assessing the safety issues related to transportation of LNG in a marine environment (ship or underwater pipeline) is the release of LNG underwater. This scenario has not been given the same level of scientific attention in the literature compared to surface releases and assessment of consequences therefrom. This paper addresses questions like, (1) does an LNG spill underwater form a pool on the water surface and subsequently evaporate like an LNG spill “on the surface” producing cold, heavier than air vapors?, and (2) what is the range of expected temperatures of the vapor, generated by LNG release due to heat transfer within the water column, when it emanates from the water surface?Very limited data from two field tests of LNG underwater release are reviewed. Also presented are the results from tests conducted in other related industries (metal casting, nuclear fission and fusion, chemical processing, and alternative fuel vehicles) where a hot (or cold) liquid is injected into a bulk cold (or hot) liquid at different depths.A mathematical model is described which calculates the temperature of vapor emanating at the water surface, and the liquid fraction of released LNG that surfaces, if any, to form a pool on the water surface. The model includes such variables as the LNG release rate, diameter of the jet at release, depth of release and water body temperature. Results obtained from the model for postulated release conditions are presented. Comparison of predicted results with available LNG underwater release test data is also provided.     

Fluorometric detection of bisphenol A using β-cyclodextrin-functionalized ZnO QDs

Environmental Science and Pollution Research - The estrogenic property of bisphenol A (BPA) leads to potential adverse health and ecological effects. A simple, selective, and cost-effective sensor...